An official website of the United States government
Owing to the substantial bandwidth they offer, the exploration of 100+ GHz frequencies for wireless communications has surged in recent years. These sub-Terahertz channels are susceptible to blockage, which makes reflected paths crucial for seamless connectivity. However, at such high frequencies, reflections deviate from the known mirror-like specular behavior as the signal wavelength becomes comparable to the height perturbation at the surface of the reflectors. Such reflectors are considered electromagnetically "rough" which results in random non-specular reflection components that are not well understood. In this dataset, we present experimental results on the impact of rough scattering on over-the-air data links as well as the characteristics of ultra-broadband THz reflection response.
more »
« less
Stabilizing Terahertz MIMO Channel Capacity with Controlled Diffuse Reflections
Communication at the terahertz band is increasingly seen as vital for future short-range very high datarate channels. However, these channels suffer from significant environmental impairments and, as a result, providing coverage in indoor settings requires the use of directional line of sight (LoS) paths to visible users and reflected paths, using smooth metal reflectors, for users in the shadow of an obstruction. Previous work has shown that these types of reflected paths display similar characteristics to LoS paths and we call them R-LoS (reflected LoS). MIMO for LoS and R-LoS channels is feasible at terahertz frequencies and delivers very high capacity at some distances. Unfortunately, channel capacity varies greatly with small changes in distance (the channel matrix fluctuates between full rank and rank 1) which is undesirable for communication systems. In this paper, we utilize diffusive reflectors to create multiple reflections such that the MIMO channel capacity for R-LoS is better behaved. We conduct experiments at 410 GHz for reflections from different artificially created diffuse surfaces. We use measurements to estimate channel capacity for 2×2 MIMO when the only path is the diffuse reflected one. We show that by creating multiple controlled reflections, it is possible to achieve relatively stable capacity up to 13 - 16 bits/sec/Hz at varying distances. We also analyze the phase of the received signals and the beam profile in detail. Overall, our results indicate that by utilizing artificially created reflections, we can maintain a stable MIMO channel at high capacity.
more »
« less
- Award ID(s):
- 1910655
- PAR ID:
- 10483577
- Publisher / Repository:
- IEEE
- Date Published:
- Journal Name:
- IEEE International Conference on Communications
- ISSN:
- 1938-1883
- ISBN:
- 978-1-5386-7462-8
- Page Range / eLocation ID:
- 5824 to 5830
- Format(s):
- Medium: X
- Location:
- Rome, Italy
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This paper investigates the impact of the number of antennas (8 to 64) and the array configuration on massive MIMO channel parameters estimation for multiple propagation scenarios at 3.5 GHz. Different measurement environments are artificially created by placing several reflectors and absorbers in an anechoic chamber. “Ground truth” channel parameters, e.g, path angles, are obtained by geometry and trigonometric rules. Then, these are compared to the channel parameters “extracted” by the applying Space-Alternating Generalized Expectation- Maximization (SAGE) algorithm on the measurements. Overall, the estimation errors for various array configurations and the multiple environments are compared. This paper will help to determine the appropriate configuration of the antenna array and the parameter extraction algorithm for outdoor massive MIMO channel sounding campaigns.more » « less
-
Despite the rapidly growing interest in exploiting millimeter and terahertz waves for wireless data transfer, the role of reflected non-line-of-sight (NLOS) paths in wireless networking is one of the least explored questions. In this paper, we investigate the idea of harnessing these specular NLOS paths for communication in directional networks at frequencies above 100 GHz. We explore several illustrative transmitter architectures, namely, a conventional substrate-lens dipole antenna and a leaky-wave antenna. We investigate how these high-gain directional antennas offer both new challenges and new opportunities for exploiting NLOS paths. Our results demonstrate the sensitivity to antenna alignment, power spectrum variations, and the disparity in supported bandwidth of various line-of-sight (LOS) and reflected path configurations. We show that NLOS paths can, under certain circumstances, offer even higher data rates than the conventional LOS path. This result illustrates the unique opportunities that distinguish THz wireless systems from those that operate at lower frequencies.more » « less
-
Terahertz frequencies are an untapped resource for providing high-speed short-range communications. As a result, it is of interest to study the propagation characteristics of terahertz waves and to develop channel models. In previous work we used a measurement-based approach to develop an accurate channel model for line of sight (LoS) links. In this paper we extend that work by developing channel models for non-line of sight (NLoS) links where the signal suffers one reflection. We study reflections that occur off a metal plate as well as a piece of wood.Our model for received magnitude includes the effects of standing waves that develop between the transmitter and receiver. Measurements show an excellent agreement between empirical data and the model. In addition, we have analyzed the received phase of the reflected signal at frequencies in the range 320-480 GHz. We observed a linear error between the predicted and actual phase and developed a model to accommodate that discrepancy. The final model we have developed for predicting received phase is very accurate for the entire range 320 - 480 GHz and for both materials.more » « less
-
An alternating optimization algorithm is presented and analyzed for identifying low-rank signal components, known in factor analysis terminology as common factors, that are correlated across two multiple-input multiple-output (MIMO) channels. The additive noise model at each of the MIMO channels consists of white uncorrelated noises of unequal variances plus a low-rank structured interference that is not correlated across the two channels. The low-rank components at each channel represent uncommon or channel-specific factors.more » « less
