skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Electrostatics Control Nanoparticle Interactions with Model and Native Cell Walls of Plants and Algae
A lack of mechanistic understanding of nanomaterial interactions with plants and algae cell walls limits the advancement of nanotechnology-based tools for sustainable agriculture. We systematically investigated the influence of nanoparticle charge on the interactions with model cell wall surfaces built with cellulose or pectin and performed a comparative analysis with native cell walls of Arabidopsis plants and green algae (Choleochaete). The high affinity of positively charged carbon dots (CDs) (46.0 ± 3.3 mV, 4.3 ± 1.5 nm) to both model and native cell walls was dominated by the strong ionic bonding between the surface amine groups of CDs and the carboxyl groups of pectin. In contrast, these CDs formed weaker hydrogen bonding with the hydroxyl groups of cellulose model surfaces. The CDs of similar size with negative (−46.2 ± 1.1 mV, 6.6 ± 3.8 nm) or neutral (−8.6 ± 1.3 mV, 4.3 ± 1.9 nm) ζ-potentials exhibited negligible interactions with cell walls. Real-time monitoring of CD interactions with model pectin cell walls indicated higher absorption efficiency (3.4 ± 1.3 10−9) and acoustic mass density (313.3 ± 63.3 ng cm–2) for the positively charged CDs than negative and neutral counterparts (p < 0.001 and p < 0.01, respectively). The surface charge density of the positively charged CDs significantly enhanced these electrostatic interactions with cell walls, pointing to approaches to control nanoparticle binding to plant biosurfaces. Ca2+-induced cross-linking of pectin affected the initial absorption efficiency of the positively charged CD on cell wall surfaces (∼3.75 times lower) but not the accumulation of the nanoparticles on cell wall surfaces. This study developed model biosurfaces for elucidating fundamental interactions of nanomaterials with cell walls, a main barrier for nanomaterial translocation in plants and algae in the environment, and for the advancement of nanoenabled agriculture with a reduced environmental impact.  more » « less
Award ID(s):
2001611
PAR ID:
10485227
Author(s) / Creator(s):
; ; ; ; ; ; ; ; ;
Publisher / Repository:
American Chemical Society
Date Published:
Journal Name:
Environmental Science & Technology
Volume:
57
Issue:
48
ISSN:
0013-936X
Page Range / eLocation ID:
19663 to 19677
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, Environmental Science: Nano)
    Surface charge is a key characteristic of nanoparticles which has great potential to impact the interactions of nanoparticles and biological systems. Understanding the role charge plays in these interactions is key to determining the ecological risks of nanoparticle exposure and informing sustainable nanoparticle design. In this study, the model freshwater algae Raphidocelis subcapitata was exposed to carbon dots (CDs) functionalized with polymers to have positive, negative, or neutral surface charges to examine the impact of nanoparticle surface charge on nano-algae interactions. Traditional toxicological endpoints of survival and growth inhibition were measured. Additionally, morphological impacts on whole cells, individual organelles, and cellular components were quantified using high-content fluorescence microscopy, demonstrating one of the first uses of high-content imaging in microalgae. Results indicate that PEI functionalized, positively charged CDs are most toxic to green algae (EC50 42.306 μg/L), but that CDs with negative charge induce sublethal impacts on algae. PEI-CD toxicity is hypothesized to be related to electrostatic interactions between CDs and the algal cell wall, which lead to significant cell aggregation. Interestingly, morphological data suggests that exposure to both positively and negatively charged CDs leads to increased neutral lipid droplet formation, a possible indicator of nutrient stress. Further investigation of the mechanisms underlying impacts of nanoparticle surface charge on algae biology can lead to more sustainable nanoparticle design and environmental protections. 
    more » « less
  2. ; ; ; ; ; ; ; (, Chemical Science)
    Molecular-level understanding of nanomaterial interactions with bacterial cell surfaces can facilitate design of antimicrobial and antifouling surfaces and inform assessment of potential consequences of nanomaterial release into the environment. Here, we investigate the interaction of cationic nanoparticles with the main surface components of Gram-positive bacteria: peptidoglycan and teichoic acids. We employed intact cells and isolated cell walls from wild type Bacillus subtilis and two mutant strains differing in wall teichoic acid composition to investigate interaction with gold nanoparticles functionalized with cationic, branched polyethylenimine. We quantified nanoparticle association with intact cells by flow cytometry and determined sites of interaction by solid-state 31 P- and 13 C-NMR spectroscopy. We find that wall teichoic acid structure and composition were important determinants for the extent of interaction with cationic gold nanoparticles. The nanoparticles interacted more with wall teichoic acids from the wild type and mutant lacking glucose in its wall teichoic acids than those from the mutant having wall teichoic acids lacking alanine and exhibiting more restricted molecular motion. Our experimental evidence supports the interpretation that electrostatic forces contributed to nanoparticle–cell interactions and that the accessibility of negatively charged moieties in teichoic acid chains influences the degree of interaction. The approaches employed in this study can be applied to engineered nanomaterials differing in core composition, shape, or surface functional groups as well as to other types of bacteria to elucidate the influence of nanoparticle and cell surface properties on interactions with Gram-positive bacteria. 
    more » « less
  3. ; (, Cellulose)
    French, Alfred (Ed.)
    While the relative abundance of plant biopolymers can vary significantly depending on the cell type and maturation, pectin and cellulose nanocrystals are among the two key biopolymers found in many plants’ primary cell walls at the early growth stage. Nanocomposites that utilize cellulose nanocrystals have gained extensive interest over the years. Limited knowledge regarding pectin and the interaction between pectin and cellulose is available because pectin was considered a non-loading-bearing component with little interaction with cellulose. However, recent developments in primary cell wall structure have shifted, and pectin is viewed as a part of the reinforcement structure. Thus, understanding the role of pectin has become relevant in creating advanced bio-composites that mimic the structure of primary cell walls. This work aims to provide fundamental information on the interaction between pectin and cellulose nanocrystals using molecular dynamics simulations. A dry interaction is modeled to replicate their status in a composite, where water is removed via processing such as freeze-drying. Interphase models consisting of two cellulose nanocrystals and a homogalacturonan pectin molecule are created to simulate the interfacial structure, including binding potential energy and hydrogen bonds. Friction and adhesion responses are predicted by moving one cellulose nanocrystal against the other. The results show that a pectin molecule increases the friction at the interphase by 14 and 8 times between CNC (200) and (110) surfaces, respectively, which is correlated to the significantly increased binding energies and interfacial hydrogen bonds, regardless of pectin’s charge density. On the other hand, the adhesion force is increased by 1.1 times with a pectin molecule between the CNC (110) surfaces. Adhesion, however, reduces to 1/5 between CNC (200) surfaces with embedded pectin, which is attributed to disrupted$$\pi$$ π -$$\pi$$ π interaction. The simulation results reveal the atomistic level interaction between pectin and cellulose nanocrystals, which is essential for designing nanocomposites using pectin and cellulose nanocrystals as main components. 
    more » « less
  4. ; (, Journal of Inclusion Phenomena and Macrocyclic Chemistry)
    Short chain perfluoroalkyl substances (PFAS), replacements for long chain legacy PFAS such as perfluorooctanoic acid (PFOA), have similar toxicity, negative health effects, and exceptional persistence as long chain PFAS. β-Cyclodextrin (β-CD) is a powerful host–guest complexing agent for a number of legacy PFAS, suggesting potential β-CD-based remediation processes. We report herein that the addition of charged functional groups at the perimeter of β-CD has a pronounced influence on the strength of the β-CD:PFAS complex. The presence of a positively charged amine functionality on the perimeter of β-CD significantly increases the complexation of legacy and short chain PFAS. We assigned the enhanced complexation to electrostatic attraction between the negatively charged PFAS head group and the positively charged β-CD derivative. In comparison to neutral β-CD, addition of a negative charge to β-CD decreases complexation to PFAS due to electrostatic repulsion between the negatively charged polar head group of PFAS and the negatively charged β-CD. 19F NMR titration experiments illustrate the complexation of short chain PFAS by positive charged β-CDs over neutral β-CD, with increases up to 20 times depending on the PFAS guest. The results give further understanding to the nature of the β-CD:PFAS host–guest complex and the various intermolecular forces that drive complexation. Positively charged β-CDs appear to be potential complexing agents for remediation of short chain PFAS. 
    more » « less
  5. ; (, in silico Plants)
    Zhu, Xin-Guang (Ed.)
    Abstract Stomata are dynamic pores on plant surfaces that regulate photosynthesis and are thus of critical importance for understanding and leveraging the carbon-capturing and food-producing capabilities of plants. However, our understanding of the molecular underpinnings of stomatal kinetics and the biomechanical properties of the cell walls of stomatal guard cells that enable their dynamic responses to environmental and intrinsic stimuli is limited. Here, we built multiscale models that simulate regions of the guard cell wall, representing cellulose fibrils and matrix polysaccharides as discrete, interacting units, and used these models to help explain how molecular changes in wall composition and underlying architecture alter guard wall biomechanics that gives rise to stomatal responses in mutants with altered wall synthesis and modification. These results point to strategies for engineering guard cell walls to enhance stomatal response times and efficiency. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email