An official website of the United States government
Low‐strain cyclic olefin monomers, including five‐membered, six‐membered, eight‐membered, and macrocyclic rings, have been recently exploited for the synthesis of depolymerizable polyolefins via ring‐opening metathesis polymerization (ROMP). Such polyolefins can undergo ring‐closing metathesis depolymerization (RCMD) to regenerate their original monomers. Nevertheless, the depolymerization behavior of polyolefins prepared by ROMP of seven‐membered cyclic olefins, an important class of low‐strain rings, still remains unexplored. In this study, we demonstrate the chemical recycling of polyheptenamers to cycloheptene under standard RCMD conditions. Highly efficient depolymerization of polyheptenamer was enabled by Grubbs' second‐generation catalyst in toluene. It was observed that the monomer yields increased when the depolymerization temperature increased and the starting polymer concentration was reduced. A near‐quantitative monomer regeneration (>96%) was achieved within 1 h under dilute conditions (20 mM of olefins) at 60°C. Moreover, polyheptenamer exhibited a decomposition temperature above 430°C, highlighting its potential as a new class of thermally stable and chemically recyclable polymer materials.
more »
« less
Chemical Recycling of Polyolefins via Ring-Closing Metathesis Depolymerization
The current insufficient recycling of commodity polymer waste has resulted in pressing environmental and human health issues in our modern society. In the quest for next-generation polymer materials, chemists have recently shifted their attention to the design of chemically recyclable polymers that can undergo depolymerization to regenerate monomers under mild conditions. During the past decade, ring-closing metathesis reactions have been demonstrated to be a robust approach for the depolymerization of polyolefins, producing low-strain cyclic alkene products which can be repolymerized back to new batches of polymers. In this review, we aim to highlight the recent advances in chemical recycling of polyolefins enabled by ring-closing metathesis depolymerization (RCMD). A library of depolymerizable polyolefins will be covered based on the ring size of their monomers or depolymerization products, including five-membered, six-membered, eight-membered, and macrocyclic rings. Moreover, current limitations, potential applications, and future opportunities of the RCMD approach will be discussed. It is clear from recent research in this field that RCMD represents a powerful strategy towards closed-loop chemical recycling of novel polyolefin materials.
more »
« less
- Award ID(s):
- 2316842
- PAR ID:
- 10485521
- Publisher / Repository:
- Royal Society of Chemistry
- Date Published:
- Journal Name:
- Chemical Communications
- Volume:
- 60
- Issue:
- 11
- ISSN:
- 1359-7345
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Ring-opening metathesis polymerization (ROMP) has been widely used for the synthesis of functional polymers. However, most ROMP-derived polymers are nondepolymerizable, limiting their sustainability and eco-friendiness. While recent advances in designing low-strain cyclic olefin monomers have enabled the ROMP synthesis of depolymerizable polyolefins, the scope of these monomers remains limited due to the narrow range of ring strain energies (RSEs = 4.7–5.4 kcal/mol) required to allow both polymerization and depolymerization in a closed-loop recycling process. Herein, we present a new class of chemically recyclable polyolefins based on cycloheptene derivatives with RSEs ranging from 3.8 to 7.2 kcal/mol. The wide range of RSEs enabled the establishment of a structure–polymerizability–depolymerizability relationship, shedding light on the role of RSE in both polymerization and depolymerization. A functional group transformation (FGT) strategy, harnessing reversible ketone-to-acetal chemistry, was developed to overcome the low polymerizability of low-strain monomers and the moderate depolymerizability of polymers made from moderate-strain monomers. This FGT approach not only enhanced the chemical recycling of moderately depolymerizable polyolefins but also provided access to highly depolymerizable polyolefins that are challenging to synthesize through direct ROMP of ultralow strain monomers. Moreover, the thermal properties of the chemically recyclable polyolefins developed in this study are highly tunable, with a broad range of glass transition temperatures (−7 to 104 °C), highlighting their potential for various applications.more » « less
-
Polymers produced by ring-opening metathesis polymerization (ROMP) of strained cyclic olefin monomers, such as norbornene and cyclobutene, are challenging to depolymerize back to their constituent monomers due to their favorable polymerization thermodynamics. Current strategies for creating depolymerizable ROMP polymers focus on designing low-strain monomers with small enthalpic driving forces, which facilitate depolymerization by reducing the monomer polymerizability. Because polymerization thermodynamics is governed by both enthalpic and entropic contributions, we reason that depolymerizable polymers could be achieved from highly strained cyclic olefin monomers if the entropic penalty of polymerization is sufficiently large. Here, we present a depolymerizable polymer system based on a series of strained bicyclo[3.2.1] monomers, which combine a substantial enthalpic driving force (−6 to −11 kcal/mol) with a significant entropic penalty of polymerization (−15 to −24 cal/mol/K). The large entropic penalty, arising from the rigid polymer backbone, lowers the ceiling temperature and imparts depolymerizability to the polymer system, leading to monomer recovery (74–99%) under standard ring-closing metathesis conditions. Moreover, the enthalpic driving force remains sufficient to enable efficient ring-opening metathesis polymerization and block copolymer synthesis. This entropy-driven strategy thus unlocks access to depolymerizable polymers from strained cyclic olefin monomers that are not traditionally considered building blocks for such materials, offering a new direction for the design of chemically recyclable polymers with an expanded monomer scope.more » « less
-
Fluorinated polymers are important functional materials for a broad range of applications, but the recycling of current fluorinated polymers is challenging. We present the first example of semi-fluorinated polymers that can undergo chemical recycling to form the corresponding monomers under ambient conditions. Prepared through ring-opening metathesis polymerization of functionalized trans -cyclobutane fused cyclooctene ( t CBCO) monomers, these polymers show tunable glass transition temperatures (−2 °C to 88 °C), excellent thermal stability (decomposition onset temperatures >280 °C) and hydrophobicity (water contact angles >90°). The hydrophobicity of the semi-fluorinated polymers was further utilized in an amphiphilic diblock copolymer, which forms self-assembled micelles with a size of ∼88 nm in an aqueous solution. Finally, through an efficient, regioselective para -fluoro-thiol substitution reaction, post-polymerization functionalization of a polymer with a pentafluorophenyl imide substituent was achieved. The ease of preparation, functionalization, and recycling, along with the diverse thermomechanical properties and demonstrated hydrophobicity make the t CBCO-based depolymerizable semi-fluorinated polymers promising candidates for sustainable functional materials that can offer a solution to a circular economy.more » « less
-
The consumption of synthetic polymers has ballooned; so has the amount of post-consumer waste generated. The current polymer economy, however, is largely linear with most of the post-consumer waste being either landfilled or incinerated. The lack of recycling, together with the sizable carbon footprint of the polymer industry, has led to major negative environmental impacts. Over the past few years, chemical recycling technologies have gained significant traction as a possible technological route to tackle these challenges. In this regard, olefin metathesis, with its versatility and ease of operation, has emerged as an attractive tool. Here, we discuss the developments in olefin-metathesis-based chemical recycling technologies, including the development of new materials and the application of olefin metathesis to the recycling of commercial materials. We delve into structure–reactivity relationships in the context of polymerization–depolymerization behavior, how experimental conditions influence deconstruction outcomes, and the reaction pathways underlying these approaches. We also look at the current hurdles in adopting these technologies and relevant future directions for the field.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1039/D3CC05612K
