An official website of the United States government
Carbon fiber-microelectrodes (CFMEs) have been the standard for neurotransmitter detection for over forty years. However, in recent years, there have been many advances of utilizing alternative nanomaterials for neurotransmitter detection with fast scan cyclic voltammetry (FSCV). Recently, carbon nanotube (CNT) yarns have been developed as the working electrode materials for neurotransmitter sensing capabilities with fast scan cyclic voltammetry. Carbon nanotubes are ideal for neurotransmitter detection because they have higher aspect ratios enabling monoamine adsorption and lower limits of detection, faster electron transfer kinetics, and a resistance to surface fouling. Several methods to modify CFMEs with CNTs have resulted in increases in sensitivity, but have also increased noise and led to irreproducible results. In this study, we utilize commercially available CNT-yarns to make microelectrodes as enhanced neurotransmitter sensors for neurotransmitters such as serotonin. CNT-yarn microelectrodes have significantly higher sensitivities (peak oxidative currents of the cyclic voltammograms) than CFMEs and faster electron transfer kinetics as measured by peak separation (ΔEP) values. Moreover, both serotonin and dopamine are adsorption controlled to the surface of the electrode as measured by scan rate and concentration experiments. CNT yarn microelectrodes also resisted surface fouling of serotonin onto the surface of the electrode over thirty minutes and had a wave application frequency independent response to sensitivity at the surface of the electrode.
more »
« less
Influence of Finite Diffusion on Cation Insertion-Coupled Electron Transfer Kinetics in Thin Film Electrodes
Materials that undergo ion-insertion coupled electron transfer are important for energy storage, energy conversion, and optoelectronics applications. Cyclic voltammetry is a powerful technique to understand electrochemical kinetics. However, the interpretation of the kinetic behavior of ion insertion electrodes with analytical solutions developed for ion blocking electrodes has led to confusion about their rate-limiting behavior. The purpose of this manuscript is to demonstrate that the cyclic voltammetry response of thin film electrode materials undergoing solid-solution ion insertion without significant Ohmic polarization can be explained by well-established models for finite diffusion. To do this, we utilize an experimental and simulation approach to understand the kinetics of Li+insertion-coupled electron transfer into a thin film material (Nb2O5). We demonstrate general trends for the peak current vs scan rate behavior, with the latter parameter elevated to an exponent between limiting values of 1 and 0.5, depending on the solid-state diffusion characteristics of the film (diffusion coefficient, film thickness) and the experiment timescale (scan rate). We also show that values < 0.5 are possible depending on the cathodic potential limit. Our results will be useful to fundamentally understand and guide the selection and design of intercalation materials for multiple applications.
more »
« less
- Award ID(s):
- 1653827
- PAR ID:
- 10487433
- Publisher / Repository:
- The Electrochemical Society
- Date Published:
- Journal Name:
- Journal of The Electrochemical Society
- Volume:
- 171
- Issue:
- 1
- ISSN:
- 0013-4651
- Format(s):
- Medium: X Size: Article No. 010527
- Size(s):
- Article No. 010527
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Efficient electrical doping of organic semiconductors relies on identifying appropriate molecular dopants that are capable of ionizing semiconductor molecules with a high yield, thereby creating mobile charges. We explore the suitability of two different material parameters to predict ion pair formation for different sets of semiconductor–dopant combinations: (i) redox-potentials measured by cyclic voltammetry in solution and (ii) ionization energy (IE)/electron affinity (EA) measured on thin films by ultraviolet/inverse photoelectron spectroscopy. Our study suggests, at least for molecular semiconductors and dopants, that redox-potentials are better suited to identify matching material pairs and their ion pair formation yield than IE/EA values. This is ascribed to the dependence of IE/EA values on molecular orientation and film structure on and above the meso-scale. In contrast, cyclic voltammetry measurements, although performed on solutions rather than on thin films, capture dopant–semiconductor energy levels on the molecular scale, which is more relevant for doping even in the case of solid thin films.more » « less
-
Intercalation electrode materials reversibly insert cations into their lattices under applied potentials or currents, which can be used to perform electrochemical separations. Optimizing performance, however, remains challenging due to tradeoffs between selectivity and separation rate being influenced by multiple variables. This study developed a quantitative model to describe the current response and cation selectivity of an intercalation electrode in a binary cation solution during cyclic voltammetry. We hypothesized that current responses and selectivity could be calculated by summing individual ion contributions. Cyclic voltammograms were experimentally measured using nickel hexacyanoferrate electrodes in NaCl, KCl, or mixed solutions. Post-mortem electron probe micro-analysis quantified intercalated Na+and K+fractions. A one-dimensional finite element model incorporating the Nernst-Frumkin isotherm, Butler-Volmer kinetics, and ion diffusion was developed, parameterized with pure NaCl or KCl solutions, and validated against mixed solutions. The model accurately reproduced experimental cyclic voltammograms and ion partitioning behaviors at ionic strengths ≥0.2 mol·l−1. However, at lower ionic strengths, significant discrepancies arose for reasons still unclear. Results indicate that modeling ion contributions individually effectively captures the electrochemical response of selective intercalation electrodes at sufficiently high ionic strengths.more » « less
-
Abstract In this work, an organic‐inorganic hybrid crystal, violet‐crystal (VC), was used to etch the nickel foam (NF) to fabricate a self‐standing electrode for the water oxidation reaction. The efficacy of VC‐assisted etching manifests the promising electrochemical performance towards the oxygen evolution reaction (OER), requiring only ~356 and ~376 mV overpotentials to reach 50 and 100 mA cm−2, respectively. The OER activity improvement is attributed to the collectively exhaustive effects arising from the incorporation of various elements in the NF, and the enhancement of active site density. Furthermore, the self‐standing electrode is robust, exhibiting a stable OER activity after 4,000 cyclic voltammetry cycles, and ~50 h. The anodic transfer coefficients (αa) show that the first electron transfer step is the rate‐determining step on the surface of NF‐VCs‐1.0 (NF etched by 1 g of VCs) electrode, while the chemical step involving dissociation following the first electron transfer step is identified as the rate‐limiting step in other electrodes. The lowest Tafel slope value observed in the NF‐VCs‐1.0 electrode indicates the high surface coverage of oxygen intermediates and more favorable OER reaction kinetics, as confirmed by high interfacial chemical capacitance and low charge transport/interfacial resistance. This work demonstrates the importance of VCs‐assisted etching of NF to activate the OER, and the ability to predict reaction kinetics and rate‐limiting step based onαavalues, which will open new avenues to identify advanced electrocatalysts for the water oxidation reaction.more » « less
-
Electrochemical ion insertion into transition metal oxides forms the foundation of several energy technologies. Transition metal oxides can exhibit sluggish ion transport and/or phase-transformation kinetics during ion insertion that can limit their performance at high rates (<10 min). In this study, we investigate the role of structural water in transition metal oxides during Li + insertion using staircase potentiostatic electrochemical impedance spectroscopy (SPEIS) and electrochemical quartz crystal microbalance (EQCM) analysis of WO 3 ·H 2 O and WO 3 thin-film electrodes. Overall, the presence of structural water in WO 3 ·H 2 O improves Li + insertion kinetics compared to WO 3 and leads to a less potential-dependent insertion process. Operando electrogravimetry and 3D Bode impedance analyses of nanostructured films reveal that the presence of structural water promotes charge accommodation without significant co-insertion of solvent, leading to our hypothesis that the electrochemically induced structural transitions of WO 3 hinder the electrode response at faster timescales (<10 min). Designing layered materials with confined fluids that exhibit less structural transitions may lead to more versatile ion-insertion hosts for next-generation electrochemical technologies.more » « less
