Incorporation of lipid assemblies on the surface and within pores of mesoporous silica particles provides for biomimetic approaches to analyte sensing and separations using high surface area platforms. This work investigates the effect of pore confinement on the location and the diffusivity of lipid assemblies in mesoporous silica spherical particles (SBAS) as a function of nanopore diameters (nonporous, 3.0, 5.4, and 9.1 nm), which span the range of the thickness of the 1,2‐dipalmitoyl‐
The effect of nanoconfinement on the kinetics of benzyl methacrylate radical polymerization is investigated using differential scanning calorimetry. Controlled pore glass (CPG), ordered mesoporous carbons, and mesoporous silica are used as confinement media with pore sizes from 2 to 8 nm. The initial polymerization rate in CPG and mesoporous silica increases relative to the bulk and increases linearly with reciprocal pore size; whereas, the rate in the carbon mesopores decreases linearly with reciprocal pore size; the changes are consistent with the rate being related to the ratio of the pore surface area to pore volume. Induction times are longer for nanoconfined polymerizations, and in the case of CPG and carbon mesopores, autoacceleration occurs earlier, presumably due to the limited diffusivity and lower termination rates for the confined polymer chains. The molecular weight of the polymer synthesized in the nanopores is generally higher than that obtained in the bulk except at the lowest temperatures investigated. The equilibrium conversion under nanoconfinement decreases with decreasing temperature and with confinement size, exhibiting what appears to be a floor temperature at low temperatures.
more » « less- Award ID(s):
- 2141221
- PAR ID:
- 10489911
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Journal of Polymer Science
- Volume:
- 62
- Issue:
- 9
- ISSN:
- 2642-4150
- Format(s):
- Medium: X Size: p. 1922-1933
- Size(s):
- p. 1922-1933
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
sn ‐glycero‐3‐phosphocholine lipid bilayer (≈4 nm). Large‐diameter SBAS are imaged with sufficient spatial resolution to distinguish lipids at the exterior surface and in the center of the particles. Lipids incorporated on the silica by evaporation deposition exist as exterior lipid bilayers on all particles and lipid assemblies in the pores of 5.4 and 9.1 nm pore diameter materials. Lipid diffusivity increases with pore size and decreases in the presence of bilayer tethering functional groups. Lipid diffusivity in the core of the particles is similar to the surface diffusivity, consistent with long‐range mobility in accessible, ordered (but randomly oriented) mesopores of SBAS materials. This work presents a framework for interpreting high density loading of lipid bilayers and their function within mesoporous materials. -
more » « less
Abstract The ability to manufacture ordered mesoporous materials using low-cost precursors and scalable processes is essential for unlocking their enormous potential to enable advancement in nanotechnology. While templating-based methods play a central role in the development of mesoporous materials, several limitations exist in conventional system design, including cost, volatile solvent consumption, and attainable pore sizes from commercial templating agents. This work pioneers a new manufacturing platform for producing ordered mesoporous materials through direct pyrolysis of crosslinked thermoplastic elastomer-based block copolymers. Specifically, olefinic majority phases are selectively crosslinked through sulfonation reactions and subsequently converted to carbon, while the minority block can be decomposed to form ordered mesopores. We demonstrate that this process can be extended to different polymer precursors for synthesizing mesoporous polymer, carbon, and silica. Furthermore, the obtained carbons possess large mesopores, sulfur-doped carbon framework, with tailorable pore textures upon varying the precursor identities.
-
Confinement Effects on the Magnetic Ionic Liquid 1-Ethyl-3-methylimidazolium Tetrachloroferrate(III)Confinement effects for the magnetoresponsive ionic liquid 1-ethyl-3-methylimidazolium tetrachloroferrate(III), [C2mim]FeCl4, are explored from thermal, spectroscopic, and magnetic points of view. Placing the ionic liquid inside SBA-15 mesoporous silica produces a significant impact on the material’s response to temperature, pressure, and magnetic fields. Isobaric thermal experiments show melting point reductions that depend on the pore diameter of the mesopores. The confinement-induced reductions in phase transition temperature follow the Gibbs–Thomson equation if a 1.60 nm non-freezable interfacial layer is postulated to exist along the pore wall. Isothermal pressure-dependent infrared spectroscopy reveals a similar modification to phase transition pressures, with the confined ionic liquid requiring higher pressures to trigger phase transformation than the unconfined system. Confinement also impedes ion transport as activation energies are elevated when the ionic liquid is placed inside the mesopores. Finally, the antiferromagnetic ordering that characterizes unconfined [C2mim]FeCl4 is suppressed when the ionic liquid is confined in 5.39-nm pores. Thus, confinement provides another avenue for manipulating the magnetic properties of this compound.more » « less
-
null (Ed.)Flufenamic acid (FFA) is a highly polymorphic compound, with nine forms to date. When melt crystallization was performed under nanoscale confinement in controlled pore glass (CPG), the formation of the extremely unstable FFA form VIII was favored. Under confinement, form VIII was sufficiently stable to allow the measurement of its melting point, which decreased with decreasing pore size in accord with the Gibbs−Thomson relationship, enabling determination of the otherwise elusive melting point of the bulk form. Moreover, the transformation pathways among the various polymorphs depended on pore size, proceeding as form VIII → form II → form I for nanocrystals embedded in 30−50-nm diameter pores, and form VIII → form IV → form III in 100−200 nm pores. In contrast, form VIII converts directly to form III in the bulk. Whereas previous reports have demonstrated that nanoconfinement can alter (thermodynamic) polymorph stability rankings, these results illustrate that nanoscale confinement can arrest and alter phase transformations kinetics such that otherwise hidden pathways can be observed.more » « less
-
In the current work, we combined different physical and chemical modifications of carbon nanofibers through the creation of micro-, meso-, and macro-pores as well as the incorporation of nitrogen groups in cyclic polyacrylonitrile (CPAN) using gas-assisted electrospinning and air-controlled electrospray processes. We incorporated them into electrode and interlayer in Li–Sulfur batteries. First, we controlled pore size and distributions in mesoporous carbon fibers (mpCNF) via adding polymethyl methacrylate as a sacrificial polymer to the polyacrylonitrile carbon precursor, followed by varying activation conditions. Secondly, nitrogen groups were introduced via cyclization of PAN on mesoporous carbon nanofibers (mpCPAN). We compared the synergistic effects of all these features in cathode substrate and interlayer on the performance Li–Sulfur batteries and used various characterization tools to understand them. Our results revealed that coating CPAN on both mesoporous carbon cathode and interlayer greatly enhanced the rate capability and capacity retention, leading to the capacity of 1000 mAh/g at 2 C and 1200 mAh/g at 0.5 C with the capability retention of 88% after 100 cycles. The presence of nitrogen groups and mesopores in both cathodes and interlayers resulted in more effective polysulfide confinement and also show more promise for higher loading systems.more » « less
