skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Attention:

The NSF Public Access Repository (PAR) system and access will be unavailable from 8:00 PM ET on Friday, March 21 until 8:00 AM ET on Saturday, March 22 due to maintenance. We apologize for the inconvenience.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Insights into the thermomechanical and interfacial behaviors of polymer‐clay nanocomposites via coarse‐grained molecular dynamics simulations
Title: Insights into the thermomechanical and interfacial behaviors of polymer‐clay nanocomposites via coarse‐grained molecular dynamics simulations
Abstract Polymer‐clay nanocomposites (PCNs) are commonly applied as multi‐functional structural materials with exceptional thermomechanical properties, while maintaining the characteristics of lightweight and optical clarity. In this study, building upon previously developed coarse‐grained (CG) models for nanoclay and poly (methyl methacrylate) (PMMA), we employ molecular dynamics (MD) simulations to systematically investigate the thermomechanical properties of PCNs when arranged in stacked configurations. Incorporating stacked clay nanofillers into a polymer matrix, we systematically conduct shear and tensile simulations to investigate the influences of variations in weight percentage, system temperature, and nanoclay size on the thermomechanical properties of PCNs at a fundamental level. The weight percentage of nanoclay in nanocomposites proves to have a significant influence on both the shear and Young's modulus (e.g., the addition of 10 Wt% nanoclay leads to an increase of 32.6% in the Young's modulus), with each exhibiting greater mechanical strength in the in‐plane direction compared to the out‐of‐plane direction, and the disparity between these two directions further widens with an increase in the weight percentage of nanoclay. Furthermore, the increase in the size of nanoclay contributes to an overall modulus enhancement in the composite while the growth reaches a saturation point after a certain threshold of about 10 nm. Our simulation results indicate that the overall dynamics of PMMA are suppressed due to the strong interactions between nanoclay and PMMA, where the confinement effect on local segmental dynamics of PMMA decays from the nanoclay‐polymer interface to the polymer matrix. Our findings provide valuable molecular‐level insights into microstructural and dynamical features of PCNs under deformation, emphasizing the pivotal role of clay‐polymer interface in influencing the thermomechanical properties of the composite materials. HighlightsCG modeling is performed to explore the thermomechanical behavior of PCN.Effects of nanoclay weight percentage and size on modulus are studied.Interface leads to nanoconfinement effect onTgand molecular stiffness.Correlations between molecular stiffness and modulus are identified.Simulations show spatial variation of dynamical heterogeneity.  more » « less
Award ID(s):
1750316 2331017
PAR ID:
10497812
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Polymer Composites
Volume:
45
Issue:
9
ISSN:
0272-8397
Format(s):
Medium: X Size: p. 8508-8526
Size(s):
p. 8508-8526
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; (, ACS Applied Polymer Materials)
    Utilizing metal–organic frameworks (MOFs) as reinforcing fillers for polymer composites is a promising strategy because of the low density, high specific modulus, and tunable aspect ratio (AR). However, it has not been demonstrated for the MOF-reinforced polymer composite using MOFs with high AR and polymer-grafted surface, both of which are extremely important factors for efficient load transfer and favorable particle–matrix interaction. To this end, we designed an MOF–polymer composite system using high AR MOF PCN-222 as the mechanical reinforcer. Moreover, we developed a synthetic route to graft poly(methyl methacrylate) (PMMA) from the surface of PCN-222 through surface-initiated atomic transfer radical polymerization (SI-ATRP). The successful growth of PMMA on the surface of PCN-222 was confirmed via proton nuclear magnetic resonance and infrared spectroscopy. Through thermogravimetric analysis, the grafting density was found to be 0.18 chains/nm2. The grafted polymer molecular weight was controlled ranging from 50.3 to 158 kDa as suggested by size exclusion chromatography. Finally, we fabricated MOF–polymer composite films by the doctor-blading technique and measured the mechanical properties through the tension mode of dynamic mechanical analysis. We found that the mechanical properties of the composites were improved with increasing grafted PMMA molecular weight. The maximum reinforcement, a 114% increase in Young’s modulus at 0.5 wt % MOF loading in comparison to pristine PMMA films, was achieved when the grafted molecular weight was higher than the matrix molecular weight, which was in good agreement with previous literature. Moreover, our composite presents the highest reinforcement measured via Young’s modulus at low weight loading among MOF-reinforced polymer composites due to the high MOF AR and enhanced interface. Our approach offers great potential for lightweight mechanical reinforcement with high AR MOFs and a generalizable grafting-from strategy for porphyrin-based MOFs. 
    more » « less
  2. ; ; ; ; ; ; (, Nanoscale)
    By employing coarse-grained (CG) molecular dynamics (MD) simulations, this study aims to investigate the thermomechanical behaviors of graphene-reinforced conjugated polymer nanocomposites at a fundamental molecular level. 
    more » « less
  3. ; ; ; (, Journal of Materials Research)
    null (Ed.)
    Flexural and thermomechanical properties of the epoxy-based carbon fiber composites (CFCs) on addition of single and binary nanoparticles (nanoclay and graphene) have been investigated. It was found that nanoclay acts more effectively in increasing the stiffness of the CFCs, whereas graphene is more effective in achieving higher strength. Nanoclay-added samples exhibited highest flexural (64.5 GPa) and storage (25.3 GPa) modulus among all types. Graphene-added samples showed highest improvement (by 21%) in flexural strength and exhibited most stable thermomechanical properties with highest energy dissipation capability (3.1 GPa loss modulus) in flexural test and dynamic mechanical analysis (DMA), respectively. By contrast, addition of binary nanoparticles reduced the stiffness and significantly increased the strain to failure (42%) of the composites. Optical microscopy and scanning electron microscopy indicated that addition of nanoparticles significantly reduced delamination and matrix cracking of the CFCs because of strong interfacial bonding and toughened matrix, respectively. 
    more » « less
  4. ; ; ; ; (, Polymer Composites)
    Abstract Carbon‐based nanoparticles are widely regarded as promising nanofillers in nanocomposites to pursue advanced properties. To date, there has been a lack of systematic investigation into the structural variations of nanofillers and their influences on dispersion characteristics, as well as the resulting mechanical properties of nanocomposites. In this study, nanodiamond (ND), carbon nanotube (CNT), and graphene (GNP) were selected as the representative zero‐, one‐, and two‐dimensional nanofillers, respectively. A novel functionalization technique utilizing carboxymethyl cellulose (CMC) was employed to disperse nanofillers. The various characterization techniques and experimental results revealed that CMC functionalization was effective in reducing the agglomeration and improving the distribution uniformity of all three nanofillers. Among the three nanofillers, zero‐dimensional ND exhibited the most homogeneous dispersion quality in epoxy nanocomposites. The strongest abrasion resistance was found in ND‐reinforced epoxy nanocomposites, while CNT‐reinforced epoxy nanocomposites exhibited the best tensile properties. HighlightsNanodiamond with a spherical structure had better dispersion characteristics.Cylindrical carbon nanotube and planar graphene tended to agglomerate.Nanodiamond reinforced nanocomposites had better abrasion resistance.Carbon nanotube reinforced nanocomposites had better tensile properties.Carboxymethyl cellulose functionalization was valid for all three nanofillers. 
    more » « less
  5. ; ; (, Journal of Polymer Science Part B: Polymer Physics)
    ABSTRACT The thermomechanical behavior of polymer nanocomposites is mostly governed by interfacial properties which rely on particle–polymer interactions, particle loading, and dispersion state. We recently showed that poly(methyl methacrylate) (PMMA) adsorbed nanoparticles in poly(ethylene oxide) (PEO) matrices displayed an unusual thermal stiffening response. The molecular origin of this unique stiffening behavior resulted from the enhanced PEO mobility within glassy PMMA chains adsorbed on nanoparticles. In addition, dynamic asymmetry and chemical heterogeneities existing in the interfacial layers around particles were shown to improve the reinforcement of composites as a result of good interchain mixing. Here, the role of chain rigidity in this interfacially controlled reinforcement in PEO composites is investigated. We show that particles adsorbed with less rigid polymers improve the mechanical properties of composites. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys.2019,57, 9–14 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email