An official website of the United States government
The buckling of thin elastic sheets is a classic mechanical instability that occurs over a wide range of scales. In the extreme limit of atomically thin membranes like graphene, thermal fluctuations can dramatically modify such mechanical instabilities. We investigate here the delicate interplay of boundary conditions, nonlinear mechanics, and thermal fluctuations in controlling buckling of confined thin sheets under isotropic compression. We identify two inequivalent mechanical ensembles based on the boundaries at constant strain (isometric) or at constant stress (isotensional) conditions. Remarkably, in the isometric ensemble, boundary conditions induce a novel long-ranged nonlinear interaction between the local tilt of the surface at distant points. This interaction combined with a spontaneously generated thermal tension leads to a renormalization group description of two distinct universality classes for thermalized buckling, realizing a mechanical variant of Fisher-renormalized critical exponents. We formulate a complete scaling theory of buckling as an unusual phase transition with a size-dependent critical point, and we discuss experimental ramifications for the mechanical manipulation of ultrathin nanomaterials.
more »
« less
Thermal buckling and symmetry breaking in thin ribbons under compression
Understanding thin sheets, ranging from the macro to the nanoscale, can allow control of mechanical properties such as deformability. Out-of-plane buckling due to in-plane compression can be a key feature in designing new materials. While thin-plate theory can predict critical buckling thresholds for thin frames and nanoribbons at very low temperatures, a unifying framework to describe the e↵ects of thermal fluctuations on buckling at more elevated temperatures presents subtle difficulties. We develop and test a theoretical approach that includes both an in-plane compression and an outof- plane perturbing field to describe the mechanics of thermalised ribbons above and below the buckling transition. We show that, once the elastic constants are renormalised to take into account the ribbon’s width (in units of the thermal length scale), we can map the physics onto a mean-field treatment of buckling, provided the length is short compared to a ribbon persistence length. Our theoretical predictions are checked by extensive molecular dynamics simulations of thin thermalised ribbons under axial compression.
more »
« less
- Award ID(s):
- 2011754
- PAR ID:
- 10499947
- Publisher / Repository:
- Elsevier
- Date Published:
- Journal Name:
- Extreme Mechanics Letters
- Volume:
- 44
- Issue:
- C
- ISSN:
- 2352-4316
- Page Range / eLocation ID:
- 101270
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This paper describes an experimental study on the behavior of load-bearing cold-formed steel (CFS) members under elevated temperatures from fire exposure. A custom-built electrical furnace with six independently controlled heating zones was installed in a loading frame, enabling testing of CFS members under uniform or non-uniform elevated temperatures. The ability to precisely control temperature gradients between the flanges allows testing a single member to failure under thermal conditions representative of a wall assembly exposed to fire on one side, capturing the effect of thermal gradient on the buckling behavior. Steady-state tests on short (18 in.) 600S200- 54 lipped channels in compression were conducted at temperatures up to 600 °C, including tests with uniform temperatures and tests with 100°C gradient between the two flanges. Coupon tests were also conducted to characterize the material properties at elevated temperatures. The members lost about 23% of their strength at 400°C and 66% at 600 °C. For these short specimens under nonuniform heating, with one flange 100°C hotter than the other, the member strength fell between the strengths associated with the temperatures of the hot and cold flanges, with limited asymmetric effect on the local buckling response. This experimental data can support the development of design methods for CFS members in fire, enabling performance-based fire design.more » « less
-
The ability of biomolecules to exert forces on their surroundings or resist compression from the environment is essential in a variety of biologically relevant contexts. For filaments in the low-temperature limit and under a constant compressive force, Euler buckling theory predicts a sudden transition from a compressed state to a bent state in these slender rods. In this paper, we use a mean-field theory to show that if a semiflexible chain is compressed at a finite temperature with a fixed end-to-end distance (permitting fluctuations in the compressive forces), it exhibits a continuous phase transition to a buckled state at a critical level of compression. We determine a quantitatively accurate prediction of the transverse position distribution function of the midpoint of the chain that indicates this transition. We find that the mean compressive forces are non-monotonic as the extension of the filament varies, consistent with the observation that strongly buckled filaments are less able to bear an external load. We also find that for the fixed extension (isometric) ensemble, the buckling transition does not coincide with the local minimum of the mean force (in contrast to Euler buckling). We also show that the theory is highly sensitive to fluctuations in length in two dimensions and the buckling transition can still be accurately recovered by accounting for those fluctuations. These predictions may be useful in understanding the behavior of filamentous biomolecules compressed by fluctuating forces, relevant in a variety of biological contexts.more » « less
-
A fundamental challenge for lightweight architected materials is their propensity for localized failure due to layered buckling, plastic shear-banding or fracture. Recent research efforts have used disorder to interrupt localization and enhance deformation, but most design strategies simply distribute the accumulation of damage, they do not prevent it from developing and propagating. This work explores how gradient architecture can be designed to hinder crack propagation and promote recoverability in nanostructured ceramic metamaterials. We experimentally and numerically investigated five different shell-based spinodal ceramic nanoarchitectures with 10-80 nm thick alumina films. These were fabricated using atomic layer deposition on sacrificial polymeric scaffolds written using two-photon lithography. All thin-walled (<40 nm) architectures underwent shell buckling-dominated deformation and showed nearly full recovery after compression to 45% strain, an expected result for this class of nanoarchitected materials. Thick-walled (>40 nm) isotropic and anisotropic architectures experienced considerable local damage during compression and predictably showed permanent failure even at low strains. Unexpectedly, thick-walled conch-shell inspired gradient architectures showed localized damage but experienced a full recovery after compression to 45% strain. This degree of recoverability has never been observed in this high density of a nanostructured ceramic, particularly one with visible local cracking during compression. This result stems from the length scale of the structural heterogeneity - the gradient layers were sufficiently small so as to inhibit the local damage development needed for crack propagation, thereby preventing catastrophic failure. Our findings have significant implications for how length scales and heterogeneity can be used to design failure-resistant materials from brittle constituents.more » « less
-
Abstract Mechanical metamaterials with negative Poisson’s ratio (NPR) have emerged as a novel class of engineering material, and have attracted increasing attention in various engineering sectors. Most studies available on the buckling problem of laminated plates with positive or NPR are those under uniaxial compression. Here, we report that the buckling phenomenon may occur for auxetic nanocomposite laminated plates under uniaxial tension when the unloaded edges of the plates are immovable. Two types of nanocomposites are considered, including graphene/Cu and carbon nanotube/Cu composites. Governing equations of the auxetic nanocomposite laminated plates are formulated based on the framework of Reddy’s higher-order shear deformation theory. In modeling, the von Kármán nonlinear strain–displacement relationship, temperature-dependent material properties, thermal effects, and the plate–substrate interaction are considered. The explicit analytical solutions for postbuckling of auxetic nanocomposite laminated plates subjected to uniaxial tension are obtained for the first time by employing a two-step perturbation approach. Numerical investigations are performed for tension buckling and postbuckling behaviors of auxetic nanocomposite laminated rectangular plates with in-plane NPR rested on an elastic substrate under temperature environments.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1016/j.eml.2021.101270
