An official website of the United States government
Experiments and models were used to determine the extent to which aqueous bromine permeated into, and reacted with, the elastomer polydimethylsiloxane (PDMS). Thin films of PDMS were immersed in bromine water, and the absorbance of bromine in the aqueous phase was measured as a function of time. Kinetics were studied as a function of mass and thickness of the immersed PDMS films. We attribute the decrease of bromine in solution to permeation into PDMS, followed by a combination of diffusion, reversible binding, and an irreversible reaction with PDMS. In order to decouple the irreversible reaction from the reversible processes, kinetics were also studied for bromine-passivated PDMS films. Fits of the models to a variety of experiments yielded the partition coefficient of bromine between the water and PDMS phases, the diffusion constant of bromine in PDMS, the irreversible reaction constant between bromine and PDMS, the molar concentration of the reactive sites within PDMS, and the on and off rates of reversible binding of bromine to PDMS. Developing a quantitative reaction-diffusion model accounting for the transport of bromine through PDMS is necessary for the design of microfluidic devices fabricated using PDMS, which are used in experimental studies of the nonlinear dynamics of reaction-diffusion networks containing Belousov-Zhabotinsky chemical oscillators.
more »
« less
Impact of PDMS-Based Microfluidics on Belousov–Zhabotinsky Chemical Oscillators
Sub-nanoliter volumes of the Belousov-Zhabotinsky (BZ) reaction are sealed in microfluidic devices made from polydimethylsiloxane (PDMS). Bromine, which is a BZ reaction intermediate that participates in the inhibitory pathway of the reaction, is known to permeate into PDMS, and it has been suggested that PDMS and bromine can react ( J. Phys. Chem. A. 108, 2004, 1325-1332). We characterize the extent to which PDMS affects BZ oscillations by varying the volume of the PDMS surrounding the BZ reactors. We measure how the oscillation period varies with PDMS volume and compare with a theoretical reaction-diffusion model, concluding that bromine reacts with PDMS. We demonstrate that minimizing the amount of PDMS by making the samples as thin as possible maximizes the number of oscillations before the BZ reaction reaches equilibrium and ceases to oscillate. We also demonstrate that the deleterious effects of the PDMS-BZ interactions are somewhat mitigated by imposing constant chemical boundary conditions through using a light-sensitive catalyst, ruthenium, in combination with patterned illumination. Furthermore, we show that light can modulate the frequency and phase of the BZ oscillators contained in a PDMS matrix by 20-30%.
more »
« less
- Award ID(s):
- 2011846
- PAR ID:
- 10506763
- Publisher / Repository:
- American Chemical Society
- Date Published:
- Journal Name:
- The Journal of Physical Chemistry B
- Volume:
- 124
- Issue:
- 51
- ISSN:
- 1520-6106
- Page Range / eLocation ID:
- 11690 to 11698
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Cardiac arrythmias are a form of heart disease that contributes toward making heart disease a significant cause of death globally. Irregular rhythms associated with cardiac arrythmias are thought to arise due to singularities in the heart tissue that generate reentrant waves in the underlying excitable medium. A normal approach to removing such singularities is to apply a high voltage electric shock, which effectively resets the phase of the cardiac cells. A concern with the use of this defibrillation technique is that the high-energy shock can cause lasting damage to the heart tissue. Various theoretical works have investigated lower-energy alternatives to defibrillation. In this work, we demonstrate the effectiveness of a low-energy defibrillation method in an experimental 2D Belousov–Zhabotinsky (BZ) system. When implemented as a 2D spatial reaction, the BZ reaction serves as an effective analog of general excitable media and supports regular and reentrant wave activity. The defibrillation technique employed involves targeted low-energy perturbations that can be used to “teleport” and/or annihilate singularities present in the excitable BZ medium.more » « less
-
Gravitational lensing is a general relativistic (GR) phenomenon where a massive object redirects light, deflecting, magnifying, and sometimes multiplying its source. We use reaction-diffusion (RD) Belousov-Zhabotinsky (BZ) chemistry to study this astronomical effect in a table-top experiment. We experimentally observe BZ waves passing through non-planar, quasi-two-dimensional molds and reproduce the waveforms in computer simulations using planar RD waves propagating with variable diffusion. We tune the variable diffusion to match the Schwarzschild-coordinate light speed near a spherical mass so the RD propagation approximates Einstein’s famous light deflection relation. We discuss varying the diffusion or reaction rates with a gel matrix or with illumination, electric field, or temperature gradients.more » « less
-
Control over the surface chemistry of elastomers such as polydimethylsiloxane (PDMS) is important for many applications. However, achieving nanostructured chemical control on amorphous material interfaces below the length scale of substrate heterogeneity is not straightforward, and can be particularly difficult to decouple from changes in network structure that are required for certain applications (e.g., variation of elastic modulus for cell culture). We have recently reported a new method for precisely structured surface functionalization of PDMS and other soft materials, which displays high densities of ligands directly on the material surface, maximizing steric accessibility. Here, we systematically examine structural factors in the PDMS components (e.g., base and cross-linker structures) that impact efficiency of the interfacial reaction that leads to surface functionalization. Applying this understanding, we demonstrate routes for generating equivalent nanometer-scale functional patterns on PDMS with elastic moduli from 0.013 to 1.4 MPa, establishing a foundation for use in applications such as cell culture.more » « less
-
Controlling morphology of polysiloxane blends crosslinked by the hydrosilylation reaction followed by pyrolysis constitutes a robust strategy to fabricate polymer-derived ceramics (PDCs) for a number of applications, from water purification to hydrogen storage. Herein, we introduce a dissipative particle dynamics (DPD) approach that captures the phase separation in binary and ternary polymer blends undergoing hydrosilylation. Linear polyhydromethylsiloxane (PHMS) chains are chosen as preceramic precursors and linear vinyl-terminated polydimethylsiloxane (v-PDMS) chains constitute the reactive sacrificial component. Hydrosilylation of carbon–carbon unsaturated double bonds results in the formation of carbon–silicon bonds and is widely utilized in the synthesis of organosilicons. We characterize the dynamics of binary PHMS/v-PDMS blends undergoing hydrosilylation and ternary blends in which a fraction of the reactive sacrificial component (v-PDMS) is replaced with the non-reactive sacrificial component (methyl-terminated PDMS (m-PDMS), polyacrylonitrile (PAN), or poly(methyl methacrylate) (PMMA)). Our results clearly demonstrate that the morphology of the sacrificial domains in the nanostructured polymer network formed can be tailored by tunning the composition, chemical nature, and the degree of polymerization of the sacrificial component. We also show that the addition of a non-reactive sacrificial component introduces facile means to control the self-assembly and morphology of these nanostructured materials by varying the fraction, degree of polymerization, or the chemical nature of this component.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1021/acs.jpcb.0c08422
