An official website of the United States government
Abstract Clutches are integral components in robotic systems, enabling programming of system stiffness and precise control over a wide range of motion types. While different types of clutches exist, electroadhesive (EA) clutches present several key advantages, such as flexibility, low mass, low power consumption, simplicity, and fast response. Achieving high EA stress in EA clutches has remained a challenge, however, necessitating high voltage input or a large contact area to achieve the desired force. In this work, an EA clutch is proposed with a high EA stress achieved by taking fracture mechanics into account and using a high dielectric composite layer while still maintaining a comparable high switching speed to other dielectric‐based EA clutches. The maximum EA stress is observed to be 108.8 N cm−2, which is four times larger than what has been reported previously among dielectric‐based EA clutches at room temperature. This high EA stress clutch can facilitate miniaturization and lower the operating voltage as well as extend to high load capacity applications. The proposed approach holds promise for advancements in various domains, including haptics (both kinesthetic and cutaneous), exoskeletons, walking robots, and other systems that require compliance, low mass, and precise force control.
more »
« less
A Low‐Voltage, High‐Force Capacity Electroadhesive Clutch Based on Ionoelastomer Heterojunctions
Abstract Electroadhesive devices with dielectric films can electrically program changes in stiffness and adhesion, but require hundreds of volts and are subject to failure by dielectric breakdown. Recent work on ionoelastomer heterojunctions has enabled reversible electroadhesion with low voltages, but these materials exhibit limited force capacities and high detachment forces. It is a grand challenge to engineer electroadhesives with large force capacities and programmable detachment at low voltages (<10 V). In this work, tough ionoelastomer/metal mesh composites with low surface energies are synthesized and surface roughness is controlled to realize sub‐ten‐volt clutches that are small, strong, and easily detachable. Models based on fracture and contact mechanics explain how clutch compliance and surface texture affect force capacity and contact area, which is validated over different geometries and voltages. These ionoelastomer clutches outperform the best existing electroadhesive clutches by fivefold in force capacity per unit area (102 N cm−2), with a 40‐fold reduction in operating voltage (± 7.5 V). Finally, the ability of the ionoelastomer clutches to resist bending moments in a finger wearable and as a reversible adhesive in an adjustable phone mount is demonstrated.
more »
« less
- Award ID(s):
- 1935294
- PAR ID:
- 10508637
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials
- Volume:
- 35
- Issue:
- 46
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Open-channel microfluidics enables precise positioning and confinement of liquid volume to interface with tightly integrated optics, sensors, and circuit elements. Active actuation via electric fields can offer a reduced footprint compared to passive microfluidic ensembles and removes the burden of intricate mechanical assembly of enclosed systems. Typical systems actuate via manipulating surface wettability (i.e., electrowetting), which can render low-voltage but forfeits open-microchannel confinement. The dielectric polarization force is an alternative which can generate open liquid microchannels (sub-100 µm) but requires large operating voltages (50–200 VRMS) and low conductivity solutions. Here we show actuation of microchannels as narrow as 1 µm using voltages as low as 0.5 VRMSfor both deionized water and physiological buffer. This was achieved using resonant, nanoscale focusing of radio frequency power and an electrode geometry designed to abate surface tension. We demonstrate practical fluidic applications including open mixing, lateral-flow protein labeling, filtration, and viral transport for infrared biosensing—known to suffer strong absorption losses from enclosed channel material and water. This tube-free system is coupled with resonant wireless power transfer to remove all obstructing hardware — ideal for high-numerical-aperture microscopy. Wireless, smartphone-driven fluidics is presented to fully showcase the practical application of this technology.more » « less
-
Abstract Li2MnO3has been contemplated as a high‐capacity cathode candidate for Li‐ion batteries; however, it evolves oxygen during battery charging under ambient conditions, which hinders a reversible reaction. However, it is unclear if this irreversible process still holds under subambient conditions. Here, the low‐temperature electrochemical properties of Li2MnO3in an aqueous LiCl electrolyte are evaluated and a reversible discharge capacity of 302 mAh g−1at a potential of 1.0 V versus Ag/AgCl at −78 °C with good rate capability and stable cycling performance, in sharp contrast to the findings in a typical Li2MnO3cell cycled at room temperature, is observed. However, the results reveal that the capacity does not originate from the reversible oxygen oxidation in Li2MnO3but the reversible Cl2(l)/Cl−(aq.) redox from the electrolyte. The results demonstrate the good catalytic properties of Li2MnO3to promote the Cl2/Cl−redox at low temperatures.more » « less
-
Abstract Combined with polymer ferroelectric dielectrics, organic field‐effect transistors are promising candidates for both electrical and photonic synapses to emulate important functions of biological synapses. In this work two distinct copolymers of poly (vinylidene fluoride) (PVDF) with trifluoroethylene and hexafluoropropylene, PVDF‐TrFE and PVDF‐HFP, respectively, are utilized as ferroelectric dielectrics due to their polarization control and non‐volatile polarization hysteresis. Using a donor–acceptor copolymer as the semiconductor layer, bottom‐gate, top‐contact transistors are fabricated with externally poled and unpoled films of PVDF‐TrFE and PVDF‐HFP where the operating voltages are less than 10 V. On average, poled PVDF‐TrFE FETs show improved characteristics with carrier mobilities > 1 cm2V−1s−1. The individual transistors are evaluated in a system level network for image recognition. The synaptic response of these devices is quantified using key metrics such as the dynamic range and nonlinearity of the analog channel conductance modulation, which are then employed to simulate the neural network behavior. The accuracy of the network in recognizing a set of handwritten digits is used to assess the effectiveness of these devices in neuromorphic architectures. The results are analyzed in terms of the poling condition of the ferroelectric dielectric, the margin of conductance modulation, and the nonlinear weight updates.more » « less
