Polymer confinement is realized in hybrid nanocomposites where individual polymer molecules are confined by a nanoporous matrix to dimensions less than the molecular size of the polymer. Here it is shown that by functionalizing the interior pore surfaces of a nanoporous organosilicate matrix, the pores can be filled with polystyrene molecules to achieve extreme levels of molecular confinement not previously possible. This provides opportunities for unique thermal and mechanical properties. It is shown that pore surface functionalization markedly impacts the polymer mobility during polymer infiltration by affecting the polymer–pore surface interaction, addressing the challenge of filling high‐molecular‐weight polymer molecules into nanoscale‐confined spaces. This allows for achieving extreme levels of molecular confinement with the loss of interchain entanglement and extensive polymer elongation along the pore axis. The glass transition temperature of the polymer is suppressed compared to bulk polymer melt, and is significantly affected by the polymer–surface interaction, which changes the polymer segmental mobility. The polymer–surface interaction also affects the interfacial polymer–pore sliding shear stress during polymer pullout from the nanopores, markedly affecting the fracture resistance of the nanocomposite.
This content will become publicly available on October 18, 2024
Matrix-assisted pulsed laser evaporation enables precise control of polymer film deposition, facilitating the creation of well-oriented epitaxial polymer films and offering insights into confined crystallization.
more » « less- Award ID(s):
- 2011750
- NSF-PAR ID:
- 10508949
- Publisher / Repository:
- Soft Matter
- Date Published:
- Journal Name:
- Soft Matter
- Volume:
- 19
- Issue:
- 40
- ISSN:
- 1744-683X
- Page Range / eLocation ID:
- 7691 to 7695
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract For the first time, direct evidence of graphene‐induced molecular reorientation in polymer films using polarization modulated infrared reflection absorption spectroscopy (PM‐IRRAS) is presented. By creating favorable electrostatic interactions, graphene–polymer interfaces can be controlled by varying polymer and solvent composition. After transfer of unmodified graphene from copper onto a polymer substrate, polymer chain rearrangement relative to the orientation at the polymer‐copper interfaces is observed using PM‐IRRAS. Transfer success is characterized using both optical transmission measurements and Raman spectroscopy to quantify the transfer fidelity, that is, graphene coverage fraction. Taken together, oxygen‐containing poly(ethylene‐
co ‐vinyl acetate) shows more polymer chain rearrangement and better graphene coverage compared to oxygen‐free polyethylene. Polymer composition seems to dominate graphene–polymer interactions while solvent choice has a smaller effect on transfer quality. These results are the first direct measurement of this effect and point toward the possibility of engineering graphene–polymer interactions for specific applications. -
The hierarchical structure and dynamics of polymer solutions control the transport of nanoparticles (NPs) through them. Here, we perform multi-particle collision dynamics simulations of solutions of semiflexible polymer chains with tunable persistence length l p to investigate the effect of chain stiffness on NP transport. The NPs exhibit two distinct dynamical regimes – subdiffusion on short time scales and diffusion on long time scales. The long-time NP diffusivities are compared with predictions from the Stokes–Einstein relation (SER), mode-coupling theory (MCT), and a recent polymer coupling theory (PCT). Increasing deviations from the SER as the polymer chains become more rigid ( i.e. as l p increases) indicate that the NP motions become decoupled from the bulk viscosity of the polymer solution. Likewise, polymer stiffness leads to deviations from PCT, which was developed for fully flexible chains. Independent of l p , however, the long-time diffusion behavior is well-described by MCT, particularly at high polymer concentration. We also observed that the short-time subdiffusive dynamics are strongly dependent on polymer flexibility. As l p is increased, the NP dynamics become more subdiffusive and decouple from the dynamics of the polymer chain center-of-mass. We posit that these effects are due to differences in the segmental mobility of the semiflexible chains.more » « less
-
more » « less
Abstract Polymer single crystals are used as templates to synthesize polymer brushes, known as the “polymer‐single‐crystal‐assisted‐grafting‐to” (PSCAGT) approach. Polymer brushes with controlled grafting densities and spatial tethering locations are demonstrated. Previous works focused on solution crystallization, which involves large amounts of organic solvent, and the grafting density can only be tuned by varying crystallization temperatures. In this work, thin film crystallization is utilized to fabricate 2D polymer crystals on flat surfaces. Subsequent chemical tethering leads to polymer brushes that retain the original morphology of the crystals with high fidelity. Furthermore, it is shown that the grafting density of the polymer brushes fabricated using this method depends on the chain end distribution on the top/bottom surfaces of the crystal, which can be facilely controlled by annealing the crystals at various nonsolvent media. This work broadens the scope of the PSCAGT method and provides a new route to achieve polymer brushes with controlled structures.
