An official website of the United States government
Chain orientation, a natural consequence of polymer film processing, often leads to enhanced mechanical properties parallel to the machine extrusion direction (MD), while leaving the properties in the transverse direction (TD) unaffected or diminished, as compared to the unoriented material. Here, we report that mixing poly(ethylene oxide)-block-poly(butylene oxide) (PEO-PBO) diblock copolymer that forms dispersed particles in an amorphous polylactide (PLA) matrix produces uniaxially stretched blend films with enhanced toughness in both the MD and TD. Small-angle X-ray scattering experiments and visual observations revealed that the dominant deformation mechanism for blend films transitions from crazing to shear yielding in the MD as the stretching ratio increases, while crazing is the primary deformation mechanism in the TD at all stretching ratios investigated. As the films age at room temperature, crazing becomes more prevalent in the MD without compromising the improved toughness. The stretched blend films were susceptible to some degree of mechanical aging in the TD but remained fivefold tougher than stretched neat PLA films for up to 150 days. This work presents a feasible route to produce uniaxially stretched PEO–PBO/PLA films that are mechanically tough, which provides a more sustainable plastic alternative.
more »
« less
Biaxial Toughening in Uniaxially Stretched Films of Block Polymer-Modified Semicrystalline Poly( l -lactide)
Semicrystalline poly(l-lactide) (PLLA) is a leading biosourced, compostable alternative to conventional plastics but lacks sufficient toughness for many applications. Chain alignment via uniaxial stretching may be used to toughen PLLA but often creates anisotropic materials that are tough in the machine direction (MD) but brittle in the transverse direction (TD). This work reports uniaxially stretched films of PLLA blended with 3 wt % poly(ethylene oxide)-block-poly(butylene oxide) (PEO-PBO), which exhibit as much as a 5-fold increase in toughness in the TD compared to similarly stretched neat PLLA films─and elucidates the impact of PEO–PBO particles on the relationship between stretching, crystallization behavior, and resultant mechanical properties. Faster stretching rates were correlated with higher yield stress and a greater degree of crystallite alignment in the PEO–PBO/PLLA blends. This trend highlights the synergistic relationship between crystallinity and chain alignment and suggests a competing mechanism of heterogeneous crystallite nucleation around PEO–PBO particles. Importantly, PEO–PBO/PLLA exhibited a TD elongation at break of 36%, five times greater than the value of similarly stretched neat PLLA and even greater than the corresponding MD value of either material. Taken together, these findings demonstrate that uniaxial stretching of PEO–PBO/PLLA blends produces biaxially tough films, with the fastest stretching conditions producing the greatest enhancement in TD toughness.
more »
« less
- PAR ID:
- 10511727
- Publisher / Repository:
- ACS Publications
- Date Published:
- Journal Name:
- ACS Applied Polymer Materials
- Volume:
- 6
- Issue:
- 9
- ISSN:
- 2637-6105
- Page Range / eLocation ID:
- 5462 to 5472
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Through a combined approach of experiment and simulation, this study quantifies the role of entanglements in determining the mechanical properties of glassy polymer blends. Uniaxial extension experiments on 100-nm films containing a bidisperse mixture of polystyrene enable quantitative comparison with molecular dynamics (MD) simulations of a coarse-grained model for polymer glasses, where the bidisperse blends allow us to systematically tune the entanglement density of both systems. In the MD simulations, we demonstrate that not all entanglements carry substantial load at large deformation, and our analysis allows the development of a model to describe the number of effective, load-bearing entanglements per chain as a function of blend ratio. The film strength measured experimentally and the simulated film toughness are quantitatively described by a model that only accounts for load-bearing entanglements.more » « less
-
ABSTRACT Formation of alginate‐based interpenetrating networks and addition of nanoparticles into these gels are widely used strategies to enhance the mechanical properties of alginate gels used for delivery and biomedical applications. Our previous work demonstrated that alginate‐clay nanocomposite hydrogels containing poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) (PEO–PPO–PEO) copolymers exhibited significant enhancement of elasticity and temperature‐dependent rheology. However, the behavior of PEO–PPO–PEO copolymers within an alginate network remains unclear. In this study, we use small‐angle neutron scattering (SANS) to investigate the interactions between the alginate network and PEO–PPO–PEO triblock chains. Our fitting results revealed that the triblock chains can form micelles integrated into the alginate gel “egg box” structure at higher temperatures. The presence of the alginate network influences the formation of PEO–PPO–PEO micelles in our gels, leading to elongated ellipsoidal micelles rather than spherical micelles. Interestingly, as the temperature increased, these micelles did not expand in all three dimensions, as observed for pure PEO–PPO–PEO solutions. Rather, the total size increased only in one direction while remaining the same in the other two directions, suggesting that the alginate networks restrict the growth of micelles. Furthermore, we did not observe the distinct higher‐order peaks that are typical of cubic PEO–PPO–PEO hydrogels; rather, relatively weak secondary peaks were observed. These results demonstrate that the presence of the alginate network significantly influences micelle formation and assembly in composite hydrogel systems.more » « less
-
Abstract The mechano‐electrical properties of poly(3‐hexylthiophene) thin films are investigated as a function of their tie‐chain content. Tie chains play an indispensable role in enabling strain‐induced structural alignment and charge‐transport enhancement in the strain direction. In the absence of sufficient tie chains, the external mechanical force cannot induce any significant polymer backbone alignment locally or crystallite reorientation at the mesoscale. These samples instead undergo brittle fracture on deformation, with cracks forming normal to the direction of strain; charge transport in this direction is hindered as a consequence. This mechanistic insight on strain alignment points to the promise of leveraging tie‐chain fraction as a practical tuning knob for effecting the mechano‐electrical properties in conjugated polymer systems.more » « less
-
Abstract In this study, poly(ethylene terephthalate)‐block‐polyethylene (PET‐PE) multiblock copolymers (MBCPs) with block molar masses of ~4 or 7 kg mol−1and either alternating or random block sequencing, and a PE‐PET‐PE triblock copolymer (TBCP) of comparable total molar mass, were synthesized. To explore the effect of molecular architecture on compatibilization, both MBCPs and TBCPs were blended into 80/20 wt/wt mixtures of PET/linear low‐density PE (LLDPE). Compatibilization was remarkably efficient for all MBCP types, with the addition of 0.2 wt% yielding blends nearly as tough as PET homopolymer. Addition of MBCP also significantly decreases LLDPE dispersed phase sizes compared to PET/LLDPE neat blends, as much as 80% in as‐mixed blends and by a factor of 10 in post‐mixing thermally annealed samples. Conversely, the TBCP was less efficient at decreasing domain sizes of the blends and improving the mechanical properties, requiring loadings of 1 wt% to produce comparably tough blends. Peel tests of PET/BCP/LLDPE trilayer films showed that both MBCPs and TBCP all improve interfacial strength over a PET‐PE bilayer film by two orders of magnitude; however, when the BCPs were preloaded into LLDPE, only the MBCP containing films showed strong adhesion highlighting their potential utility as adhesive agents in multilayer films.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1021/acsapm.4c00670
