skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Material-Adaptive Anomaly Detection Using Property-Concatenated Transfer Learning in Wire Arc Additive Manufacturing
Wire arc additive manufacturing is a promising additive manufacturing process because of its high deposition rate, and material diversity. However, the low quality of melted parts is a critical issue, owing to the difficulty in establishing design rules for process–structure–property–performance. Previous studies have resolved this challenge by deriving anomaly detection models for quality monitoring and have largely relied on machine learning by training melt pool image data. Acquiring sufficient data is a key to obtaining reliable models in machine learning; however, an issue arises from concerning the cost intensiveness in high-cost materials. We propose a material-adaptive anomaly detection method to detect balling defects in a target material using property-concatenated transfer learning. First, transfer learing is applied to derive convolutional neural network (CNN)-based models from a source material and transfer them to a target material, wherein data are insufficient and machine learning rarely achieves high performance. Second, material properties are concatenated on transfer learning as additional features onto image features, contrary to typical transfer learning where CNNs only extract image features. We perform experiments in a gas tungsten arc welding system with low-carbon steel (LCS), stainless steel (STS), and inconel (INC) materials. Our models achieve best classification accuracies of 82.95%, 89.47%, and 84.22% when transferring from LCS to STS, LCS to INC, and STS to INC, respectively, compared with 78.03%, 86.37%, and 73.63% obtained using typical transfer learning. The proposed method can effectively resolve the data scarcity by model transfer from sufficient datasets in low-cost materials to rare datasets in high-cost materials. Moreover, it outperforms typical transfer learning because material properties are learned as manufacturing-knowledge features, accounting for melting and hardening characteristics of materials.  more » « less
Award ID(s):
2015693
PAR ID:
10511887
Author(s) / Creator(s):
; ; ;
Publisher / Repository:
Springer
Date Published:
Journal Name:
International Journal of Precision Engineering and Manufacturing
ISSN:
2234-7593
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Journal of Computational Design and Engineering)
    Abstract Wire arc additive manufacturing (WAAM) has gained attention as a feasible process in large-scale metal additive manufacturing due to its high deposition rate, cost efficiency, and material diversity. However, WAAM induces a degree of uncertainty in the process stability and the part quality owing to its non-equilibrium thermal cycles and layer-by-layer stacking mechanism. Anomaly detection is therefore necessary for the quality monitoring of the parts. Most relevant studies have applied machine learning to derive data-driven models that detect defects through feature and pattern learning. However, acquiring sufficient data is time- and/or resource-intensive, which introduces a challenge to applying machine learning-based anomaly detection. This study proposes a multisource transfer learning method that generates anomaly detection models for balling defect detection, thus ensuring quality monitoring in WAAM. The proposed method uses convolutional neural network models to extract sufficient image features from multisource materials, then transfers and fine-tunes the models for anomaly detection in the target material. Stepwise learning is applied to extract image features sequentially from individual source materials, and composite learning is employed to assign the optimal frozen ratio for converging transferred and present features. Experiments were performed using a gas tungsten arc welding-based WAAM process to validate the classification accuracy of the models using low-carbon steel, stainless steel, and Inconel. 
    more » « less
  2. ; ; ; (, Journal of Manufacturing Processes)
    Convolutional neural network (CNN), a type of deep learning algorithm, is a powerful tool for analyzing visual images. It has been actively investigated to monitor metal additive manufacturing (AM) processes for quality control and has been proven effective. However, typical CNN algorithms inherently have two issues when used in metal AM processes. First, in many cases, acquiring datasets with sufficient quantity and quality, as well as necessary information, is challenging because of technical difficulties and/or cost intensiveness. Second, determining a near-optimal CNN model takes considerable effort and is time-consuming. This is because the types and quality of datasets can be significantly different with respect to different AM processes and materials. The study proposes a novel concatenated ensemble learning method to obtain a flexible and robust algorithm for in-situ anomaly detection in wire + arc additive manufacturing (WAAM), a type of wire-based direct energy deposition (DED) process. For this, data, as well as machine learning models, were seamlessly integrated to overcome the limitations and difficulties in acquiring sufficient data and finding a near-optimal machine learning model. Using inexpensively obtainable and comprehensive datasets from the WAAM process, the proposed method was investigated and validated. In contrast to the one-dimensional and two-dimensional CNN models’ accuracies of 81.6 % and 88.6 %, respectively, the proposed concatenated ensemble model achieved an accuracy of 98 %. 
    more » « less
  3. ; ; ; ; (, Journal of Manufacturing Science and Engineering)
    Abstract Distortion in laser-based additive manufacturing (LBAM) is a critical issue that adversely affects the geometric integrity of additively manufactured parts and generally exhibits a complicated dependence on the underlying material. The differences in properties between distinct materials prevent the immediate application of a distortion model learned for one material to another, which introduces the challenge in LBAM of learning a distortion model for a new material system given past experiments. Current methods for investigating the distortion of different material systems typically involve finite element analysis or a large number of experiments in an empirical study. However, these methods do not learn from previous experiments and can incur significant costs in terms of computation, time, or resources. We propose a Bayesian model transfer methodology that is both physics-based and data-driven to leverage past experiments on previously studied material systems for more efficient distortion modeling of new systems. This method transfers distortion models across distinct materials based on the statistical effect equivalence framework by formulating the differences between two materials as a lurking variable. Our method reduces the experimentation and effort needed for specifying distortion models for new material systems. We validate our methodology in a case study of distortion model transfer from Ti–6Al–4V disks to 316L stainless steel disks. This case study is the first instance of model transfer between material systems and illustrates the ability of the Bayesian model transfer methodology to address the issue of comprehensive distortion modeling across varying material systems in LBAM. 
    more » « less
  4. ; (, Composites science and technology)
    Kushvaha, V.; Sanjay, M. R.; Madhushri, P.; Siengchin, S. (Ed.)
    The products manufactured by the additive manufacturing (AM) methods have unique signatures in their microstructures due to the layer by layer manufacturing. Machine learning of microstructures of the printed sample can help in interpreting these signatures and the patterns can be used for either determining the authenticity of the product or for reverse engineering. In this work, specimens of 3D printed glass fiber reinforced polymer (GFRP) composite materials are subjected to imaging and machine learning in order to rebuild the tool path information. Since composites require significant research and development effort, the possibility of rebuilding the tool path by ML methods presents a significant vulnerability for intellectual property. The ML methods require a large training dataset and can be efficient in processing tomography datasets. Two kinds of artificial neural networks with three different algorithms are introduced in this work and their results are compared. A 3D printed GFRP specimen is imaged using a micro CT-scan and the images are processed using binarized statistical image features method for compression without compromising the microstructural information. The ML models are trained on this dataset and the results indicate that the ML is able to identify the printing tool path with accuracy. 
    more » « less
  5. ; ; ; (, Metals)
    null (Ed.)
    Advanced high strength dual-phase steels are one of the most widely sought-after structural materials for automotive applications. These high strength steels, however, are prone to fracture under bending-dominated manufacturing processes. Experimental observations suggest that the bendability of these steels is sensitive to the presence of subsurface non-metallic inclusions and the inclusions exhibit a rather discrete size effect on the bendability of these steels. Following this, we have carried out a series of microstructure-based finite element calculations of ductile fracture in an advanced high strength dual-phase steel under bending. In the calculations, both the dual-phase microstructure and inclusion are discretely modeled. To gain additional insight, we have also analyzed the effect of an inclusion on the bendability of a single-phase material. In line with the experimental observations, strong inclusion size effect on the bendability of the dual-phase steel naturally emerge in the calculations. Furthermore, supervised machine learning is used to quantify the effects of the multivariable input space associated with the dual-phase microstructure and inclusion on the bendability of the steel. The results of the supervised machine learning are then used to identify the contributions of individual features and isolate critical features that control the bendability of dual-phase steels. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email