This study assesses the impact of fold-thrust belt driven deformation on the topographic evolution, bedrock exhumation and basin formation in the southeastern Peruvian Andes. We do this through a flexural and thermokinematically modelled balanced cross-section. In addition, published thermochronology samples from low-elevation (river canyons) and high-elevation (interfluves) and Cenozoic sedimentary basin datasets along the balanced cross-section were used to evaluate the age, location, and geometry of fault-driven uplift, as well as potential relationships to the timing of ∼2 km of canyon incision. The integrated structural, thermochronologic, and basin data were used to test the sensitivity of model results
to various shortening rates and durations, a range of thermophysical parameters, and different magnitudes and timing of canyon incision. Results indicate that young apatite (U-Th)/He (AHe) canyon samples from ∼2 km in elevation or lower are consistent with river incision occurring between ∼8–2 Ma and are independent of the timing of ramp-driven uplift and accompanying erosion. In contrast, replicating the young AHe canyon samples located at >2.7 km elevation requires ongoing ramp-driven uplift. Replicating older interfluve cooling ages concurrent with young canyon ages necessitates slow shortening rates (0.25–0.6 mm/y) from ∼10 Ma to Present, potentially reflecting a decrease in upper plate compression during slab steepening. The best-fit model that reproduces basin ages and depositional contacts requires a background shortening rate of 3–4 mm/y with a marked decrease in rates to ≤0.5 mm/y at ∼10 Ma. Canyon incision occurred during this period of slow shortening, potentially enhanced by Pliocene climate
change.
more »
« less
This content will become publicly available on October 1, 2024
Assessing drivers of high exhumation magnitudes and young cooling ages in the eastern central Andes, southern Peru (13–18°S)
The potential structural controls on exhumation across the southern Peruvian Andes are not well understood, in part due to limited structural studies that co-locate with thermochronometric datasets. We integrate these two datasets and evaluate the relative contribution that fault geometry, magnitude, and shortening rate have on predicted cooling ages. Here we present a balanced cross-section constructed using new structural observations. This section, combined with existing thermochronometer data and a thermokinematic model, investigates the drivers of high exhumation and young canyon thermochronometric ages along the deeply incised Marcapata canyon in southern Peru. Together, these approaches constrain the timing and magnitude of exhumation in this portion of the southern Peruvian Andes and provide a mechanism for documenting how the internal architecture changes along strike. The balanced cross-section (oriented N30E) covers the Subandean Zone to the northeast, the Marcapata
canyon on the eastern flank of the southern Peruvian Andes, and the Altiplano-Eastern Cordillera boundary to the southwest (13–18◦ S). Exhumation is constrained by four low-temperature thermochronometer systems, including apatite and zircon (U-Th)/He (AHe and ZHe, respectively) and fission-track (AFT and ZFT, respectively). The youngest AHe (∼1–3 Ma), AFT (∼3–7 Ma), ZHe (∼4–7 Ma), and ZFT (∼14–17 Ma) ages are located in the center and valley bottom of the Marcapata canyon. The thermokinematically modeled cross-section produces cooling ages determined by fault geometry and kinematics. Reset ZFT ages require burial of Ordovician rocks in excess of 5.5 km above the original 6.5 km depositional depth. We find that the ZFT and ZHe ages in the Eastern Cordillera are sensitive to the history and magnitude
of burial, age and location of uplift, and canyon incision. Canyon incision is required to reproduce the youngest canyon thermochronometric ages while slow shortening rates from ∼10 Ma to Present are required to reproduce interfluve thermochronometric ages. Shortening is accommodated by basement faults that feed slip up through three different décollement levels before reaching the surface. The proposed stacked basement geometry sets the first-order cooling signal seen in modeled ages. We determined that the total shortening in this section from the Subandean Zone to the Altiplano is 147.5 km, similar to shortening estimates in an adjacent thermo-kinematically modeled section in the San Gabán canyon 50 km to the southeast. Both the ZHe and ZFT ages in the Marcapata section (4–5 and 14 Ma) are noticeably younger than cooling ages from the San Gabán section (16 and 29 Ma). The Marcapata section’s higher magnitude of exhumation is due to a repetition of basement thrusts that continues to elevate the Eastern Cordillera while active deformation occurs in the Subandean Zone. The youngest thermochronometric ages in all four systems are co-located with the overlapping basement thrust geometry. This basement geometry, kinematic sequence of deformation, and canyon incision co-conspire to produce the young cooling ages observed in the Eastern Cordillera.
more »
« less
- Award ID(s):
- 1842172
- NSF-PAR ID:
- 10513715
- Publisher / Repository:
- Elsevier
- Date Published:
- Journal Name:
- Earth and Planetary Science Letters
- Volume:
- 620
- Issue:
- C
- ISSN:
- 0012-821X
- Page Range / eLocation ID:
- 118281
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
more » « less
Deep-time thermochronology by the zircon (U-Th)/He (ZHe) method is an emerging field of study with promise for constraining Precambrian rock thermal and exhumation histories. The Grand Canyon provides an opportunity to further explore this method because excellent geologic constraints can be integrated with multiple thermochronometers to address important questions about the spatial variability of basement erosion below the sub-Cambrian Great Unconformity composite erosional surface. In this study, we synthesize new ZHe results (n = 26) and published (n = 77) ZHe data with new K-feldspar 40Ar/39Ar data and models (n = 4) from Precambrian basement rocks of the Grand Canyon, USA. We use HeFTy and QTQt thermal history modeling to evaluate the ability of the individual ZHe and K-feldspar 40Ar/39Ar thermochronometric data sets to resolve Precambrian thermal histories and compare those results with jointly modeled data using the QTQt software. We also compare Precambrian basement thermal histories of the eastern and western Grand Canyon, where the eastern Grand Canyon has ∼4 km of Grand Canyon Supergroup strata deposited and preserved, and the western Grand Canyon, where the Supergroup was either never deposited or not preserved. In all locations, models constrained only by ZHe data have limited resolving power for the past ∼600 m.y., compared to models that combine K-feldspar 40Ar/39Ar and ZHe data, which extends the recorded history into the Mesoproterozoic. Our model results suggest that two regional basement unroofing events occurred. A ca. 1350−1250 Ma cooling event is interpreted to record basement exhumation from depths of ∼10 km, and a second cooling episode (∼200−100 °C total) records exhumation from a depth of ∼3 km to 7 km to near-surface conditions between ca. 600 Ma and 500 Ma. Easternmost Grand Canyon models suggest that the preserved maximum ∼4 km thickness of the Grand Canyon Supergroup (with burial heating at ∼100 °C) approximates the total original Mesoproterozoic and Neoproterozoic stratal thickness. Whether these Supergroup rocks were present and then eroded in the western Grand Canyon, as suggested by regional geologic studies, or were never deposited is not constrained by thermochronological data.
-
Abstract Our study used zircon (U-Th)/He (ZHe) thermochronology to resolve cooling events of Precambrian basement below the Great Unconformity surface in the eastern Grand Canyon, United States. We combined new ZHe data with previous thermochronometric results to model the <250 °C thermal history of Precambrian basement over the past >1 Ga. Inverse models of ZHe date-effective uranium (eU) concentration, a relative measure of radiation damage that influences closure temperature, utilize He diffusion and damage annealing and suggest that the main phase of Precambrian cooling to <200 °C was between 1300 and 1250 Ma. This result agrees with mica and potassium feldspar 40Ar/39Ar thermochronology showing rapid post–1400 Ma cooling, and both are consistent with the 1255 Ma depositional age for the Unkar Group. At the young end of the timescale, our data and models are also highly sensitive to late-stage reheating due to burial beneath ∼3–4 km of Phanerozoic strata prior to ca. 60 Ma; models that best match observed date-eU trends show maximum temperatures of 140–160 °C, in agreement with apatite (U-Th)/He and fission-track data. Inverse models also support multi-stage Cenozoic cooling, with post–20 Ma cooling from ∼80 to 20 °C reflecting partial carving of the eastern Grand Canyon, and late rapid cooling indicated by 3–7 Ma ZHe dates over a wide range of high eU. Our ZHe data resolve major basement exhumation below the Great Unconformity during the Mesoproterozoic (1300–1250 Ma), and “young” (20–0 Ma) carving of Grand Canyon, but show little sensitivity to Neoproterozoic and Cambrian basement unroofing components of the composite Great Unconformity.more » « less
-
more » « less
Abstract Understanding, and ideally quantifying, the relative roles of climatic and tectonic processes during orogenic exhumation is critical to resolving the dynamics of mountain building. However, vastly differing opinions regarding proposed drivers often complicate how thermochronometric ages are interpreted, particularly from the hinterland portions of thrust belts. Here we integrate three possible cross‐section geometries and kinematics along a transect through the eastern Bhutan Himalaya with a thermal model (Pecube‐D) to calculate the resulting thermal field and predict potential ages. We compare predicted ages to a suite of new and published cooling ages. Our results argue for ramp‐focused exhumation of the Main Central thrust from 16 to 14 Ma at shortening rates of 40–55 mm/year, followed by slower rates (25 mm/year) during the last 50 km of Main Central thrust displacement and growth of the Lesser Himalayan duplex from 14 to 11 Ma. Emplacement of frontal Lesser Himalayan thrust sheets occurred rapidly (55–70 mm/year) between ~11 and 9 Ma, followed by a decrease in shortening rates to ~10 mm/year during motion on the Main Boundary thrust. Modern shortening rates (17 mm/year) and out‐of‐sequence motion on the Main Boundary thrust from 0.5 Ma to present reproduce the young cooling ages near the Main Boundary thrust. We show that the dominant control on exhumation patterns in a fold‐thrust belt results from the evolution of ramps and emphasize that the geometry and kinematics of structures driving hinterland exhumation need to be evaluated with their linked foreland structures to ensure the viability of the proposed geometry, kinematics, and thus cooling history.
-
Quantifying the impacts of past changes in tectonics or climate on mountain topography has proven challenging. The incision of the eastern Central Andean Plateau has been interpreted as both a result of deformation-related uplift and erosion and climate-driven erosion. Here, we contribute >100 new apatite and zircon (U-Th)/He and fission-track dates from 51 new and eight previous bedrock samples. These samples were combined with previous thermochronometer data from three ∼190-km-long and ∼200-km-apart across-strike transects along the eastern margin of the Andean Plateau in southern Peru. We discuss age-distance, age-elevation, and inverse thermal history model results along these transects to constrain the timing and extent of recent canyon incision compared to the region’s long-term (∼40 Myrs) exhumation history. Results indicate that, along the plateau flank, long-term, deformation-related exhumation is superimposed by a regional, synchronous canyon incision-related signal since ∼4–3 Ma. This incision is traceable from at least the Abancay Deflection in southern Peru to southern Bolivia along the eastern Central Andes. Based on the regional and synchronous character of canyon incision across areas with different deformation histories and exhumation magnitude, we suggest that paleoclimate change was a significant contributor to incision. However, structural processes resulting in surface uplift, erosion, and exhumation continued post-mid Miocene and contributed to the observed exhumation magnitude.more » « less
