An official website of the United States government
Abstract Band edges at the high symmetry points in reciprocal space of periodic structures hold special interest in materials engineering for their high density of states. In optical metamaterials, standing waves found at these points have facilitated lasing, bound‐states‐in‐the‐continuum, and Bose–Einstein condensation. However, because high symmetry points by definition are localized, properties associated with them are limited to specific energies and wavevectors. Conversely, quasi‐propagating modes along the high symmetry directions are predicted to enable similar phenomena over a continuum of energies and wavevectors. Here, quasi‐propagating modes in 2D nanoparticle lattices are shown to support lasing action over a continuous range of wavelengths and symmetry‐determined directions from a single device. Using lead halide perovskite nanocrystal films as gain materials, lasing is achieved from waveguide‐surface lattice resonance (W‐SLR) modes that can be decomposed into propagating waves along high symmetry directions, and standing waves in the orthogonal direction that provide optical feedback. The characteristics of the lasing beams are analyzed using an analytical 3D model that describes diffracted light in 2D lattices. Demonstrations of lasing across different wavelengths and lattice designs highlight how quasi‐propagating modes offer possibilities to engineer chromatic multibeam emission important in hyperspectral 3D sensing, high‐bandwidth Li‐Fi communication, and laser projection displays.
more »
« less
Symmetry‐Determined Lasing from Incommensurate Moiré Nanoparticle Lattices
Abstract This paper describes how moiré plasmonic nanoparticle lattices can exhibit lasing action over a broad wavelength and wavevector range. Moiré nanolithography is combined with the PEEL (Photolithography, Etching, Electron‐beam deposition, and Lift‐off) process to fabricate in‐plane incommensurate lattices with optical properties beyond the restricted geometries of Bravais lattices. Because of increased rotational symmetry, moiré lattices support a larger number of transverse electric and transverse magnetic modes relative to their periodic base lattices. It is found that multidirectional lasing characteristics can be predicted by the symmetry of the moiré reciprocal lattice. Incommensurate moiré plasmonic lattices combine advantages of the dense band structures observed in aperiodic lattices with that of predicted modes in Bravais lattices for light‐based technologies in coherent light sources and multiplexed data transfer.
more »
« less
- Award ID(s):
- 2028773
- PAR ID:
- 10516449
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Optical Materials
- Volume:
- 12
- Issue:
- 24
- ISSN:
- 2195-1071
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract A plasmonic nanolaser architecture that can produce white‐light emission is reported. A laser device is designed based on a mixed dye solution used as gain material sandwiched between two aluminum nanoparticle (NP) square lattices of different periodicities. The (±1, 0) and (±1, ±1) band‐edge surface lattice resonance (SLR) modes of one NP lattice and the (±1, 0) band‐edge mode of the other NP lattice function as nanocavity modes for red, blue, and green lasing respectively. From a single aluminum NP lattice, simultaneous red and blue lasing is realized from a binary dye solution, and the relative intensities of the two colors are controlled by the volume ratio of the dyes. Also, a laser device is constructed by sandwiching dye solutions between two Al NP lattices with different periodicities, which enables red–green and blue–green lasing. With a combination of three dyes as liquid gain, red, green, and blue lasing for a white‐light emission profile is realized.more » « less
-
Twistronics has been studied for manipulating electronic properties through a twist angle in the formed moiré superlattices of two dimensional layer materials. In this paper, we study twistoptics for manipulating optical properties in twisted moiré photonic patterns without physical rotations. We describe a theoretic approach for the formation of single-layer twisted photonic pattern in square and triangular lattices through an interference of two sets of laser beams arranged in two cone geometries. The moiré period and the size of unit super-cell of moiré patterns are related to the twist angle that is calculated from the wavevector ratio of laser beams. The bright and dark regions in moiré photonic pattern in triangular lattices are reversible. We simulate E-field intensities and their cavity quality factors for resonance modes in moiré photonic pattern in square lattices. Due to the bandgap dislocation between the bright and dark regions, the resonance modes with very high quality-factors appears near bandgap edges for the moiré photonic pattern with a twist angle of 9.5 degrees. At the low frequency range, the resonance modes can be explained as Mie resonances. The cavity quality factor decreases for resonance modes when the twist angle is increased to 22.6 degrees.more » « less
-
Semiconductor nanocrystals (NCs) can function as efficient gain materials with chemical versatility because of their surface ligands. Because the properties of NCs in solution are sensitive to ligand–environment interactions, local chemical changes can result in changes in the optical response. However, amplification of the optical response is technically challenging because of colloidal instability at NC concentrations needed for sufficient gain to overcome losses. This paper demonstrates liquid lasing from plasmonic lattice cavities integrated with ligand-engineered CdZnS/ZnS NCs dispersed in toluene and water. By taking advantage of calcium ion-induced aggregation of NCs in aqueous solutions, we show how lasing threshold can be used as a transduction signal for ion detection. Our work highlights how NC solutions and plasmonic lattices with open cavity architectures can serve as a biosensing platform for lab-on-chip devices.more » « less
-
Abstract The giant circular photo‐galvanic effect is realized in chiral metals when illuminated by circularly polarized light. However, the structure itself is not switchable nor is the crystal chirality in the adjacent chiral domains. Here spindle‐shaped liquid crystalline elastomer microparticles that can switch from prolate to spherical to oblate reversibly upon heating above the nematic to isotropic transition temperature are synthesized. When arranged in a honeycomb lattice, the continuous shape change of the microparticles leads to lattice reconfiguration, from a right‐handed chiral state to an achiral one, then to a left‐handed chiral state, without breaking the translational symmetry. Accordingly, the sign of rotation of the polarized light passing through the lattices changes as measured by time‐domain terahertz spectroscopy. Further, it can locally alter the chirality in the adjacent domains using near‐infrared light illumination. The reconfigurable chiral microarrays will allow us to explore non‐trivial symmetry‐protected transport modes of topological lattices at the light–matter interface. Specifically, the ability to controllably create chiral states at the boundary of the achiral/chiral domains will lead to rich structures emerging from the interplay of symmetry and topology.more » « less
