Rates of crustal deformation in the southern Basin and Range (SBR) and Colorado Plateau (CP) provinces are relatively low in the context of the Pacific‐North America plate boundary (PA–NA); however, the accumulation of small amounts of strain over long periods of time can lead to large earthquakes such as the
Geodetic strain rate characterizes present-day crustal deformation and therefore may be used as a spatial predictor for earthquakes. However, the reported correlation between strain rates and seismicity varies significantly in different places. Here, we systematically study the correlation between strain rate, seismicity, and seismic moment in six regions representing typical plate boundary zones, diffuse plate boundary regions, and continental interiors. We quantify the strain rate–seismicity correlation using a method similar to the Molchan error diagram and area skill scores. We find that the correlation between strain rate and seismicity varies with different tectonic settings that can be characterized by the mean strain rates. Strong correlations are found in typical plate boundary zones where strain rates are high and concentrated at major fault zones, whereas poor or no correlations are found in stable continental interiors with low strain rates. The correlation between strain rate and seismicity is also time dependent: It is stronger in seismically active periods but weaker during periods of relative quiescence. These temporal variations can be useful for hazard assessment.
more » « less- Award ID(s):
- 2013656
- PAR ID:
- 10517155
- Publisher / Repository:
- Seismological Society of America
- Date Published:
- Journal Name:
- Seismological Research Letters
- Volume:
- 95
- Issue:
- 4
- ISSN:
- 0895-0695
- Page Range / eLocation ID:
- 2375 to 2385
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract M w 7.5 1887 Sonoran earthquake in northern Mexico. SBR and CP rates of deformation are difficult to quantify due to a dearth of young faulting and seismicity. Moreover, strain accumulation and release related to the adjacent, more active San Andreas and Gulf of California fault systems to the west and southwest can mask the background strain rates associated with SBR and CP tectonics. With data from an enhanced continuous GPS network, we estimate crustal surface velocities of the SBR and CP, after removing coseismic and postseismic displacements, and elastic loading effects arising from major fault zones to the (south)west. We use cluster analysis and geologic data to separate the GPS velocity field into regions and calculate distinct block rotation and uniform strain rates for each region. We find the highest strain rate region includes southwestern Arizona; an area with sparse Quaternary faults, relatively low seismicity, and a relatively large discrepancy between geodetic and geologic rates of deformation. This anomalous strain rate may reflect residual, unmodeled PA‐NA strain seeping into the Arizona study area from the west. Alternatively, it may represent the potential for one or more rare, future, large‐magnitude earthquakes or indicate strain is being released through other process(es). -
more » « less
ABSTRACT Geodetic data in plate boundary zones reflect the accrual of tectonic strain and stress, which will ultimately be released in earthquakes, and so they can provide valuable insights into future seismic hazards. To incorporate geodetic measurements of contemporary deformation into the 2022 revision of the New Zealand National Seismic Hazard Model 2022 (NZ NSHM 2022), we derive a range of strain-rate models from published interseismic Global Navigation Satellite Systems velocities for New Zealand. We calculate the uncertainty in strain rate excluding strain from the Taupō rift–Havre trough and Hikurangi subduction zone, which are handled separately, and the corresponding moment rates. A high shear strain rate occurs along the Alpine fault and the North Island dextral fault belt, as well as the eastern coast of the North Island. Dilatation rates are primarily contractional in the South Island and less well constrained in the North Island. Total moment accumulation derived using Kostrov-type summation varies from 0.64 to 2.93×1019 N·m/yr depending on method and parameter choices. To account for both aleatory and epistemic uncertainty in the strain-rate results, we use four different methods for estimating strain rate and calculate various average models and uncertainty metrics. The maximum shear strain rate is similar across all methods, whereas the dilatation rate and overall strain rate style differ more significantly. Each method provides an estimate of its own uncertainty propagated from the data uncertainties, and variability between methods provides an additional estimate of epistemic uncertainty. Epistemic uncertainty in New Zealand tends to be higher than the aleatory uncertainty estimates provided by any single method, and epistemic uncertainty on dilatation rate exceeds the aleatory uncertainty nearly everywhere. These strain-rate models were provided to the NZ NSHM 2022 team and used to develop fault-slip deficit rate models and scaled seismicity rate models.
-
more » « less
Abstract The East African Rift System (EARS) provides an opportunity to constrain the relationship between magmatism and plate thinning. During continental rifting, magmatism is often considered a derivative of strain accommodation—as the continental plate thins, decompression melting of the upper mantle occurs. The Turkana Depression preserves among the most extensive Cenozoic magmatic record in the rift. This magmatic record, which comprises distinct basaltic pulses followed by periods of relative magmatic quiescence, is perplexing given the lack of evidence for temporal heterogeneity in the thermo‐chemical state of the upper mantle, the nonexistence of lithospheric delamination related fast‐wave speed anomalies in the upper mantle, and the absence of evidence for sudden, accelerated divergence of Nubia and Somalia. We focus on the Pliocene Gombe Stratoid Series and show how lithospheric thinning may result in pulsed magma generation from a plume‐influenced mantle. By solving the 1D advection‐diffusion equation using rates of plate thinning broadly equivalent to those measured geodetically today we show that despite elevated mantle potential temperature, melt generation may not occur and thereby result in extended intervals of quiescence. By contrast, an increase in the rate of plate thinning can generate magma volumes that are on the order of that estimated for the parental magma of the Gombe Stratoid Series. The coincidence of large‐volume stratiform basalt events within the East African Rift shortly before the development of axial zones of tectonic‐magmatic activity suggests that the plate thinning needed to form these stratiform basalts may herald the onset of the localization of strain.
-
more » « less
Abstract The potential for future earthquakes on faults is often inferred from inversions of geodetically derived surface velocities for locking on faults using kinematic models such as block models. This can be challenging in complex deforming zones with many closely spaced faults or where deformation is not readily described with block motions. Furthermore, surface strain rates are more directly related to coupling on faults than surface velocities. We present a methodology for estimating slip deficit rate directly from strain rate and apply it to New Zealand for the purpose of incorporating geodetic data in the 2022 revision of the New Zealand National Seismic Hazard Model. The strain rate inversions imply slightly higher slip deficit rates than the preferred geologic slip rates on sections of the major strike‐slip systems including the Alpine Fault, the Marlborough Fault System and the northern part of the North Island Fault System. Slip deficit rates are significantly lower than even the lowest geologic estimates on some strike‐slip faults in the southern North Island Fault System near Wellington. Over the entire plate boundary, geodetic slip deficit rates are systematically higher than geologic slip rates for faults slipping less than one mm/yr but lower on average for faults with slip rates between about 5 and 25 mm/yr. We show that 70%–80% of the total strain rate field can be attributed to elastic strain due to fault coupling. The remaining 20%–30% shows systematic spatial patterns of strain rate style that is often consistent with local geologic style of faulting.
-
Kinematics of rift linkage between the Eastern and Ethiopian rifts in the Turkana Depression, Africamore » « less
Abstract Rift initiation within cold, thick, strong lithosphere and the evolving linkage to form a contiguous plate boundary remains debated in part owing to the lack of time–space constraints on kinematics of basement‐involved faults. Different rift sectors initiate diachronously and may eventually link to produce a jigsaw spatial pattern, as in the East African rift, and along the Atlantic Ocean margins. The space–time distribution of earthquakes illuminates the geometry and kinematics of fault zones within the crystalline crust, as well as areas with pressurized magma bodies. We use seismicity and Global Navigation System Satellites (GNSS) data from the Turkana Rift Array Investigating Lithospheric Structure (TRAILS) project in East Africa and a new digital compilation of faults and eruptive centres to evaluate models for the kinematic linkage of two initially separate rift sectors: the Main Ethiopian Rift (MER) and the Eastern rift (ER). The ca. 300 km wide zone of linkage includes failed basins and linkage zones; seismicity outlines active structures. Models of GNSS data indicate that the ca. 250 km‐wide zone of seismically active en echelon basins north of the Turkana Depression is a zone, or block, of distributed strain with small counterclockwise rotation that serves to connect the Main Ethiopian and Eastern rifts. Its western boundary is poorly defined owing to data gaps in South Sudan. Strain across the northern and southern boundaries of this block, and an ca. 50 km‐wide kink in the southern Turkana rift is accommodated by en echelon normal faults linked by short strike‐slip faults in crystalline basement, and relay ramps at the surface. Short segments of obliquely oriented basement structures facilitate across‐rift linkage of faults, but basement shear zones and Mesozoic rift faults are not actively straining. This configuration has existed for at least 2–5 My without the development of localized shear zones or transform faults, documenting the importance of distributed deformation in continental rift tectonics.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1785/0220230306
