An official website of the United States government
Colloidal quantum dots (CQDs) are of interest for photovoltaic applications such as flexible and multijunction solar cells, where solution processability and infrared absorption are crucial; however, current CQD solar cell performance is limited by the hole transport layers (HTLs) used in the cells. We report on a method to develop new HTLs for the highest-performing PbS CQD solar cell architecture by tuning the stoichiometry via sulfur infiltration of the p-type CQD HTL to increase its doping density and carrier mobility. Using SCAPS simulations, we predict that increased doping density and mobility should improve the performance of the solar cells. We show that sulfur doping of the current HTL is a facile and effective method to boost the performance of CQD photovoltaics.
more »
« less
Improving PbS Colloidal Quantum Dot Solar Cell Performance via Solution-Phase Engineering
Lead Sulfide (PbS) colloidal quantum dots (CQDs) are promising materials for flexible and wearable photovoltaic devices and technologies due to their low cost, solution processibility and bandgap tunability with quantum dot size. However, PbS CQD solar cells have limitations on performance efficiency due to charge transport losses in the CQD layers and hole transport layer (HTL). This study pursues two promising techniques in parallel to address these challenges. Solution-phase annealing of the absorbing PbS-PbX2 (X = Br, I) layer can reduce charge transport losses by removing oleic acid and parasitic hydroxyl ligands. Additionally, optoelectronic simulations are used to show that HTL performance can be improved by the addition of a 2D transition metal dichalcogenide (TMD) layer to the PbS CQD-based HTL. We use solution-phase exfoliation to produce and incorporate 2D WSe2 nanoflakes into the HTL. We report a power conversion efficiency (PCE) increase of up to 3.4% for the solution-phase-annealed devices and up to 1% for the 2D WSe2 HTL augmented devices. A combination of these two techniques should result in high-performing PbS CQD solar cells, paving the way for further advancements in flexible photovoltaics.
more »
« less
- Award ID(s):
- 1846239
- PAR ID:
- 10517561
- Publisher / Repository:
- IEEE
- Date Published:
- ISBN:
- 978-1-6654-6059-0
- Page Range / eLocation ID:
- 1 to 3
- Format(s):
- Medium: X
- Location:
- San Juan, PR, USA
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Colloidal quantum dots (CQDs) are promising materials for photovoltaic applications due to their solution processibility and size-dependent band gap tunability. The electron transport layer (ETL) is an important component of PbS CQD solar cells, and the quality of the zinc oxide nanoparticle (ZnO NP) ETL film significantly impacts both the power conversion efficiency (PCE) and fabrication yield of CQD solar cells. We report on multiple methods to improve the quality of ZnO NP ETL films and demonstrate increased PCE and device yield in standard CQD solar cells employing optimized ZnO NP films. We also discuss the application of these methods in an inverted CQD solar cell architecture.more » « less
-
null (Ed.)Colloidal Quantum Dot (CQD) thin films are ad- vantageous for solar energy generation because of their low- cost and size-tunable, solution-processable nature. However, their efficiency in solar cells is limited in part by the performance of the hole transport layer (HTL). Through Solar Cell Capacitance Simulations and Transfer Matrix Method calculations, we show that significant photogeneration occurs in the standard HTL of ethanedithiol-passivated lead sulfide CQDs which is a problem due to the sub-optimal carrier mobility in this material. We report new HTLs composed of chalcogenide-based materials to address these issues, and demonstrate an absolute power conversion efficiency improvement of 1.35% in the best device.more » « less
-
Antimony selenide (Sb2Se3) is a promising light absorber material for solar cells because of its superior photovoltaic properties. However, the current performance of the Sb2Se3 solar cell is much lower than its theoretical value (∼32%) due to its low open-circuit voltage (VOC). In this paper, we have demonstrated inorganic vanadium oxides (VOx) as a hole transport layer (HTL) for Sb2Se3 solar cells to enhance efficiency through the VOC improvement. Here, a solution-processed VOx through the decomposition of the triisopropoxyvanadium (V) oxide is deposited on the Sb2Se3 absorber layer prepared by close-spaced sublimation (CSS). With VOx HTL, the built-in voltage (Vbi) is significantly increased, leading to improved VOC for the Sb2Se3 solar cell devices. As a result, the efficiency of the device increases from an average efficiency of 5.5% to 6.3% with the VOx.more » « less
-
Capacitance-based techniques have been used to measure the electrical properties of halide perovskite solar cells (PSCs) such as defect activation energy and density, carrier concentration, and dielectric constant, which provide key information for evaluating the device performance. Here, we show that capacitance-based techniques cannot be used to reliably analyze the properties of defects in the perovskite layer or at its interface, since the high-frequency capacitance signature is due to the response of charge carriers in the hole-transport layer (HTL). For HTL-free PSCs, the high-frequency capacitance can be considered as the geometric capacitance for analyzing the dielectric constant of the perovskite layer, since there is no trapping and de-trapping of charge carriers in the perovskite layer. We further find that the low-frequency capacitance signature can be used to calculate the activation energy of the ionic conductivity of the perovskite layer, but the overlapping effects with charge transport materials must be avoided.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1109/PVSC48320.2023.10359532
