An official website of the United States government
Lubricated contacts are present in many engineering and biological systems involving soft solids. Typical mechanisms considered for controlling the sliding friction in such lubricated conditions involve bulk material compliance, fluid viscosity, viscoelastic response of the material (hysteretic friction), and breaking of the fluid film where dry contact occurs (adhesive friction). In this work we show that a two-phase periodic structure (TPPS), with a varying modulus across the sliding surface, provides significant enhancement of lubricated sliding friction when the system is in the elastohydrodynamic lubrication (EHL) regime. We propose that the enhanced friction is due to extra energy loss during periodic transitions of the sliding indenter between the compliant and stiff regions during which excess energy is dissipated through the fluid layer. This is a form of elastic hysteresis that provides a novel mechanism for friction enhancement in soft solids under lubricated conditions.
more »
« less
Masing Manifolds: Reconciling the Masing Conditions with Real Hysteresis in Jointed Structures
The Masing conditions establish a criterion to relate the loading curve of a hysteretic system (e.g., systems with friction or plasticity) to its complete hysteresis loop. For the field of joint mechanics, where hysteretic models are often used to describe the dissipative, tangential behavior within an interface, the Masing conditions allow for significant computational savings when the normal load is constant. In practice, though, jointed systems experience time varying normal forces that modify the tangential behavior of the system. Consequently, the hysteretic behavior of jointed structures do not adhere to the Masing conditions. In this work, this discrepancy between the Masing conditions and behavior exhibited by jointed structures is explored, and it is hypothesized that if the Masing conditions accounted for variations in normal force, then they would more accurately represent jointed structures. A new set of conditions is introduced to the original set of Masing conditions, yielding a « Masing manifold » that spans the tangential displacement-tangential force-normal force space. Both a simple harmonic oscillator and a built-up structure are investigated for the case of elastic dry friction, and the results show that the hysteresis of both of these systems conforms to the three dimensional Masing manifold exactly, provided that a set of constraints are satisfied, even though the hysteresis does not conform with the original Masing conditions.
more »
« less
- Award ID(s):
- 1847130
- PAR ID:
- 10522689
- Publisher / Repository:
- Journal of Structural Dynamics
- Date Published:
- Journal Name:
- Journal of Structural Dynamics
- ISSN:
- 2684-6500
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Modeling dry friction is a challenging task. Accurate models must incorporate hysteretic rise of force across displacement and non-linearity from the Stribeck effect. Though sufficiently accurate models have been proposed for simple friction systems where these two effects dominate, certain rotational friction systems introduce self-energizing and accompanying backlash effects. These systems are termed self-energizing systems. In these systems, the friction force is amplified by a mechanical advantage which is charged through motion and released during reversing the direction of travel. This produces energized and backlash regimes within which the friction device follows different dynamic behaviors. This paper examines self-energizing rotational friction, and proposes a combined physics and machine learning approach to produce a unified model for energized and backlash regimes. In this multi-process information fusion methodology, a classical LuGre friction model is augmented to allow state-dependent parameterization provided by a machine learning model. The method for training the model from experimental data is given, and demonstrated with a 20 kN banded rotary friction device used for structural control. Source code replicating the methodology is provided. Results demonstrate that the combined model is capable of reproducing the backlash effect and reduces error compared to the standard LuGre model by a cumulative 32.8%; in terms modeling the tested banded rotary friction device. In these experimental tests, realistic pre-defined displacements inputs are used to validate the damper. The output of the machine learning model is analyzed and found to align with the physical understanding of the banded rotary friction device.more » « less
-
Brushed stimuli are perceived as pleasant when stroked lightly on the skin surface of a touch receiver at certain velocities. While the relationship between brush velocity and pleasantness has been widely replicated, we do not understand how resultant skin movements – e.g., lateral stretch, stick-slip, normal indentation – drive us to form such judgments. In a series of psychophysical experiments, this work modulates skin movements by varying stimulus stiffness and employing various treatments. The stimuli include brushes of three levels of stiffness and an ungloved human finger. The skin’s friction is modulated via non-hazardous chemicals and washing protocols, and the skin’s thickness and lateral movement are modulated by thin sheets of adhesive film. The stimuli are hand-brushed at controlled forces and velocities. Human participants report perceived pleasantness per trial using ratio scaling. The results indicate that a brush’s stiffness influenced pleasantness more than any skin treatment. Surprisingly, varying the skin’s friction did not affect pleasantness. However, the application of a thin elastic film modulated pleasantness. Such barriers, though elastic and only 40 microns thick, inhibit the skin’s tangential movement and disperse normal force. The finding that thin films modulate affective interactions has implications for wearable sensors and actuation devices.more » « less
-
We present a rigorous analysis of the transient evolution of nearly circular bilayer interfaces evolving under the thin interface limit, ε ≪ 1, of the mass preserving L2-gradient flow of the strong scaling of the functionalized Cahn–Hilliard equation. For a domain Ω ⊂ R2 we construct a bilayer manifold with boundary comprised of quasi-equilibria of the flow and a projection onto the manifold that associates functions u in an H2 tubular neighborhood of the manifold with an interface Γ embedded in Ω. The linearization of the flow about the manifold does not present a clear spectral separation of modes normal and tangential to the manifold. The dimension of the parameterization of the interfaces and the bilayer manifold controls both the normal coercivity of the manifold and the coupling between normal and tangential modes, both of which increase with this dimension. The key step in the analysis is the identification of a range of dimensions in which coercivity dominates the coupling, permitting the closure of the nonlinear estimates that establish the asymptotic stability of the manifold. Orbits originating in a thin, forward invariant, tubular neighborhood ultimately converge to an equilibrium associated to a circular interface. Projections of these orbits yield interfacial evolution equivalent at leading order to the regularized curve-lengthening motion characterized by normal motion against mean curvature, regularized by a higher order Willmore expression. The curve lengthening is driven by absorption of excess mass from the regions of Ω away from the interface, leading to high dimensional dynamics that are ill-posed in the ε → 0+ limit.more » « less
-
null (Ed.)The phase separation behavior of intrinsically disordered proteins (IDPs) is thought of as analogous to that of polymers that undergo equilibrium lower or upper critical solution temperature (LCST and UCST, respectively) phase transition. This view, however, ignores possible nonequilibrium properties of protein assemblies. Here, by studying IDP polymers (IDPPs) composed of repeat motifs that encode LCST or UCST phase behavior, we discovered that IDPs can access a wide spectrum of nonequilibrium, hysteretic phase behaviors. Experimentally and through simulations, we show that hysteresis in IDPPs is tunable and that it emerges through increasingly stable interchain interactions in the insoluble phase. To explore the utility of hysteretic IDPPs, we engineer self-assembling nanostructures with tunable stability. These findings shine light on the rich phase separation behavior of IDPs and illustrate hysteresis as a design parameter to program nonequilibrium phase behavior in self-assembling materials.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.25518/2684-6500.154
