An official website of the United States government
Biology is replete with examples, at length scales ranging from the molecular (ligand–receptor binding) to the mesoscopic scale (wing arresting structures on dragonflies) where shape-complementary surfaces are used to control interfacial mechanical properties such as adhesion, friction, and contact compliance. Related bio-inspired and biomimetic structures have been used to achieve unique interfacial properties such as friction and adhesion enhancement, directional and switchable properties. The ability to tune friction by altering surface structures offers advantages in various fields, such as soft robotics and tire manufacturing. Here, we present a study of friction between polydimethylsiloxane (PDMS) samples with surfaces patterned with pillar-arrays. When brought in contact with each other the two samples spontaneously produce a Moire´ pattern that can also be represented as an array of interfacial dislocations that depends on interfacial misorientation and lattice spacing. Misorientation alone produces an array of screw dislocations, while lattice mismatch alone produces an array of edge dislocations. Relative sliding motion is accompanied by interfacial glide of these patterns. The frictional force resisting dislocation glide arises from periodic single pillar–pillar contact and sliding. We study the behavior of pillar–pillar contact with larger (millimeter scale) pillar samples. Inter-pillar interaction measurements are combined with a geometric model for relative sliding to calculate frictional stress that is in good agreement with experiments.
more »
« less
Sliding friction of a pillar array interface: part II, contact mechanics of single pillar pairs
Insects and small animals often utilize structured surfaces to create friction during their movements. These surfaces typically consist of pillar-like fibrils that interact with a counter surface. Understanding the mechanical interaction between such surfaces is crucial for designing structured surfaces for engineering applications. In the first part of our study, we examined friction between poly(dimethylsiloxane) (PDMS) samples with surfaces patterned with pillar-arrays. We observed that sliding between these surfaces occurs through the interfacial glide of dislocation structures. The frictional force that resists this dislocation glide is a result of periodic single pillar-pillar contact and sliding. Hence, comprehending the intricate interaction between individual pillar contacts is a fundamental prerequisite for accurately modeling the friction behavior of the pillar array. In this second part of the study, we thoroughly investigated the contact interaction between two pillars located on opposite sides of an interface, with different lateral and vertical offsets. We conducted experiments using PDMS pillars to measure both the reaction shear and normal forces. Contact interaction between pillars was then studied using finite element (FE) simulations with the Coulomb friction model, which yielded results that aligned well with the experimental data. Our result offers a fundamental solution for comprehending how fibrillar surfaces contact and interact during sliding, which has broad applications in both natural and artificial surfaces.
more »
« less
- Award ID(s):
- 1854572
- PAR ID:
- 10525262
- Publisher / Repository:
- Royal Society of Chemistry
- Date Published:
- Journal Name:
- Soft Matter
- Volume:
- 20
- Issue:
- 7
- ISSN:
- 1744-683X
- Page Range / eLocation ID:
- 1459 to 1466
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)The interface between two surfaces patterned with complementary shapes such as arrays of ridge–channel structures or pillars accommodates relative misorientation and lattice mismatch by spontaneous production of dislocation arrays. Here, we show that the relative sliding of such an interface is accomplished by dislocation glide on the interfacial plane. An exception is the singular case where the lattices are perfectly matched across the sample dimension, in which case sliding is accompanied by motion of edge-nucleated defects. These are meso-scale analogues of molecular sliding friction mechanisms between crystalline interfaces. The dislocations, in addition to the long-range elastic energy associated with their Burgers vectors, also cause significant out-of-plane dilation, which props open the interface locally. For this reason, the sliding friction is strongly pressure dependent; it also depends on the relative orientation of the patterns. Sliding friction can be strongly enhanced compared with a control, showing that shape-complementary interfaces can be engineered for strongly enhanced pressure- and orientation-dependent frictional properties in soft solids.more » « less
-
Asymmetric microstructures are of particular interest to many technical fields. Such structures can produce anisotropic flow-fields, which, for example, can be used to control heat and mass transport processes. Anisotropic wicking structures can now be systematically engineered with unique micro-pillar geometries and spatial pillar-placement distributions. Such asymmetric wicking structure designs are of particular interest to the thermal management community due to need to cool heterogeneous materials with specific heat load configurations. In this study, asymmetric half-conical micropillars have been fabricated utilizing two-photon polymerization. Macroscopic characterization of anisotropic flow-field velocities is performed via high-speed videography. High-speed thin-film interferometry and microscopic side-angle videography are also used to characterize the microscale evolution of meniscus curvature during inter-pillar wicking. The wicking velocity is observed to be directly proportional to both the meniscus curvature and the cross-sectional area of the micro-pillars (normal to the flow). An anisotropic hemiwicking model is also described with comparisons to experimental data. The hemiwicking model predicts the macroscopic wicking behavior (within 20% or less) for the relatively broad range of pillar geometries and pillar spacing configurations. These anisotropic flow-field predictions can help engineers design the next-generation of micro-structured heat sinks, fluid-based sensors and chemical harvesting systems.more » « less
-
Test of the Effective Stress Law for Semibrittle Deformation Using Isostatic and Triaxial Load PathsAbstract For brittle friction and rock deformation, the coefficientαin the general effective stress relationσe = σ − αPpcan be approximated as unity with sufficient accuracy. However, it is uncertain ifαdeviates from unity for semibrittle flow when both brittle and intracrystalline‐plastic deformation is involved. We conducted triaxial and isostatic compression experiments on synthetic salt‐rocks (∼300 ppm water) at room temperature to test the effective stress relation in the semibrittle regime using silicone oil and argon gas as pore fluids. Confining and pore pressures were cycled while their difference (differential pressure) was kept constant, such that changes in the mechanical behavior would indicate deviation ofαfrom unity. Microstructural observations were used to determine the dependence ofαon true area of grain contact from asperity yielding. In triaxial compression experiments, semibrittle flow involves grain boundary cracking and sliding, and intragranular dislocation glide and cracking. Flow strength remains constant for changes in pore fluid pressure of more than two orders of magnitude. In isostatic compression experiments, samples show combined processes of microcracking, grain boundary sliding, dislocation glide, and fluid‐assisted grain boundary migration recrystallization. Volumetric strain depends directly on the differential pressures (i.e.,αequals one). Analysis of grain‐contact area in both experiments indicates thatαis independent of the true area of contact defined by plastic yielding at grain boundaries. The observation ofαeffectively equals one may be explained by operation of pressure‐independent intracrystalline‐plastic mechanisms and transmission of pore pressure at grain boundaries through thin fluid films.more » « less
-
Abstract Nature has examples of impressive surfaces and interfaces with diverse wettability stemming from superhydrophilicity to superhydrophobicity. The multiscale surface structures found in biological systems generally have high geometric complexity, which makes it challenging to replicate their characteristics, especially using traditional fabrication techniques. It is even more challenging to fabricate such complex microstructures with tunable wettability. In this paper, we propose a method to tune the wettability of a microscale surface by changing the geometrical parameters of embedded microstructures in the surface. By taking inspiration from an insect (springtails), we designed micropillar arrays with different roughness by adjusting geometric parameters such as reentrant angle, pitch distance, and the number of spikes and pillars. This study shows that, by changing geometrical parameters in microscale, the apparent contact angle, and hence the surface wettability can be calibrated. The microscale pillars were fabricated using a precise microdirect light processing (μDLP) three-dimensional (3D) printer. Different printing parameters were studied to optimize the geometric parameters to fabricate 3D hierarchical structures with high accuracy and resolution. The largest apparent contact angle in our experiments is up to 160 deg, with pillars of 0.17 mm height and 0.5 mm diameter, 55 deg reentrant angle, and a spacing of 0.36 mm between pillars. The lowest contact angle is ∼35 deg by reducing the pillar size and spacing. By controlling the size of different features of the pillar, pillar number, and layout of the mushroom-shaped micropillars, the wettability of the surface is possible to be tuned from a highly nonwetting liquid/material combination to highly wetting material. Such wettability tuning capability expands the design space for many biomedical and thermofluidic applications.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/D3SM01324C
