An official website of the United States government
Predicting machined surface roughness is critical for estimating a part’s performance characteristics such as susceptibility to fatigue and corrosion. Prior studies have indicated that power consumed at the tool-chip interface may represent an indicator for the surface integrity of the machining process. However, no quantita-tive association has been reported between the machining power and surface roughness due to a lack of data to develop predictive models. This paper presents a data synthesis method to address this gap. Specifically, a conditional generative adversarial network (CGAN) is developed to synthesize power signals associated with varying process parameter combinations. The quality of the synthesized signals is evaluated against experimentally measured power signals by examining the consistency in: 1) the spatial pattern of the signals induced by the cutting process as shown in the frequency domain, and 2) the temporal pattern as shown in the clustering of the synthesized and measured signals corresponding to the same parameter combination. The synthesized signals are then used to augment the measured signals and develop a convolutional neural network (CNN) for predicting the machined surface roughness. Experiments performed using H13 tool steel have shown that data augmentation by CGAN has effectively reduced the error of the surface roughness prediction from 58 %, when no synthetic data is used for CNN training, to 9.1 % when 250 synthetic samples are used. The results demonstrate the effectiveness of CGAN as a data augmentation method and CNN for mapping machining power to surface roughness.
more »
« less
Multi-sensor fusion and machine learning-driven sequence-to-sequence translation for interpretable process signature prediction in machining
During machining, kinetic energy is imparted to a workpiece to remove material. The integrity of the machined surface, which depends on the energy transfer, affects the quality and performance of the product, therefore needs to be quantified. Prior studies have indicated the potential of using machining power, or the power consumption at the tool-chip interface, as a process signature for predicting machined surface integrity. However, direct measurement of machining power is constrained by the availability of special equipment and the associated cost. To address this gap, this paper presents a machine learning-based method for machining power prediction through multi-sensor fusion and sequence-to-sequence translation from acoustic and vibration signals, which represent portions of the in-situ kinetic energy dissipation, to the machining power signal as a process signature. Specifically, a neural network architecture is developed to separately translate the acoustic and vibration signals to corresponding machining power signals. The two predicted power signals are subsequently fused to arrive at a unified power signal prediction. To check for spurious decision logic, the sensor fusion model is interpreted using integrated gradients to reveal temporal regions of the input data which have the most influence on the machining power prediction accuracy of the fusion model. Systematic cutting experiments performed on a lathe using 1018 steel have shown that the developed sensor fusion method for process signature prediction can successfully map machine acoustics to power consumption with 5.6% error, tool vibration to power consumption with 8.2% error, and acoustics and vibration, jointly, to power with 2.5% error. Model parameter interpretation reveals that the vibration signal is more influential on the machining power prediction result than the acoustic signal, but that overall model accuracy is diminished if only the vibration signal is used.
more »
« less
- Award ID(s):
- 2040288
- PAR ID:
- 10528343
- Publisher / Repository:
- Elsevier
- Date Published:
- Journal Name:
- Journal of Manufacturing Systems
- Volume:
- 75
- Issue:
- C
- ISSN:
- 0278-6125
- Page Range / eLocation ID:
- 288 to 298
- Subject(s) / Keyword(s):
- Machining Sensor fusion Process signature Interpretable machine learning Acoustic signals
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The vibration-assisted atomic force microscope (AFM)-based nanomachining offers a promising opportunity for low-cost nanofabrication with high tunability. However, critical challenges reside in advancing the throughput and the quality assurance of the process due to extensive offline experimental investigations and characterizations, which in turn hinders the wide industry applications of current AFM-based nanomachining process. Hence, it is necessary to create an in-process monitoring for the nanomachining to allow real-time inspection and process characterizations. This paper reports a sensor-based analytic approach to allow real-time estimations of the AFM-based nanomachining process. The temporal-spectral features of collected acoustic emission (AE) sensor signals are applied to predict the depth morphology of nanomachined trenches under different machining conditions. The experimental case study suggests that the most significant frequency domain information from AE sensor can accurately predict (R-squared value around 92%) the nanomachined depth profile. It, therefore, breaks the current limitation of characterization tools at the nanoscale precision level, and opens up an opportunity to allow real-time estimation for quality inspection of vibration-assisted AFM-based nanofabrication process.more » « less
-
Abstract In recent years, semiconductors, electronics, optics, and various other industries have seen a significant surge in the use of sapphire materials, driven by their exceptional mechanical and chemical properties. The machining of sapphire surfaces plays a crucial role in all these applications. However, due to sapphires’ exceptionally high hardness (Mohs hardness of 9, Vickers hardness of 2300) and brittleness, machining them often presents challenges such as microcracking and chipping of the workpiece, as well as significant tool wear, making sapphires difficult to cut. To enhance the machining efficiency and machined surface integrity, ultrasonic vibration-assisted (UV-A) machining of sapphire has already been studied, showing improved performance with lower cutting force, better surface finish, and extended tool life. Scribing tests using a single-diamond tool not only are an effective method to understand the material removal mechanism and deformation characteristics during such UV-A machining processes but also can be used as a potential process for separating IC chips from wafers. This paper presents a comprehensive study of the UV-A scribing process, aiming to develop an understanding of sapphire’s material removal mechanism under varying ultrasonic power levels and cutting tool geometries. In this experimental investigation, the effect of five different levels of ultrasonic power and three different cutting tool tip angles at various feeding depths on the scribe-induced features of the sapphire surface has been presented with a quantitative and qualitative comparison. The findings indicate that at feeding depths less than 6 μm, UV-A scribing with 40–80% ultrasonic power can reduce cutting force up to 50% and thus improve scribe quality. However, between feeding depths of 6 to 10 μm, this advantage of using ultrasonic vibration gradually diminishes. Additionally, UV-A scribing with a smaller tool tip angle (60°) was found to lower cutting force by 65% and improve scribe quality, effectively inhibiting residual stress formation and microcrack propagation. Furthermore, UV-A scribing also facilitated higher critical feeding depths at around 10 μm, compared to 6 μm in conventional scribing.more » « less
-
Emerging wearable sensors have enabled the unprecedented ability to continuously monitor human activities for healthcare purposes. However, with so many ambient sensors collecting different measurements, it becomes important not only to maintain good monitoring accuracy, but also low power consumption to ensure sustainable monitoring. This power-efficient sensing scheme can be achieved by deciding which group of sensors to use at a given time, requiring an accurate characterization of the trade-off between sensor energy usage and the uncertainty in ignoring certain sensor signals while monitoring. To address this challenge in the context of activity monitoring, we have designed an adaptive activity monitoring framework. We first propose a switching Gaussian process to model the observed sensor signals emitting from the underlying activity states. To efficiently compute the Gaussian process model likelihood and quantify the context prediction uncertainty, we propose a block circulant embedding technique and use Fast Fourier Transforms (FFT) for inference. By computing the Bayesian loss function tailored to switching Gaussian processes, an adaptive monitoring procedure is developed to select features from available sensors that optimize the trade-off between sensor power consumption and the prediction performance quantified by state prediction entropy. We demonstrate the effectiveness of our framework on the popular benchmark of UCI Human Activity Recognition using Smartphones.more » « less
-
Machining processes involve various sources of uncertainty which lead to inaccurate interpretation of results in the surface integrity of machined products. This work presents a physics-informed, data-driven modeling framework for achieving comprehensive uncertainty quantification (UQ) of the impact of process and material variability on machining-induced residual stress (RS). Uncertainty due to the variation in bulk material properties and model input parameters in machining are considered. Preliminary results showed that variations in calibration parameters have a substantial effect on modeling RS, while the variation in material properties has a smaller effect. Further research directions for UQ in machining are also outlined.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1016/j.jmsy.2024.04.010
