skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Estimates of Crystallinity Utilizing Differential Scanning Calorimetry: Application to the Kīlauea 2018 Lower East Rift Zone Eruption
Title: Estimates of Crystallinity Utilizing Differential Scanning Calorimetry: Application to the Kīlauea 2018 Lower East Rift Zone Eruption
Abstract Rocks produced by diverse processes, from condensation in space to impacts on planetary surfaces to volcanism, contain both crystals and amorphous material. Crystallinity provides information on the thermal history of the sample and is especially important in characterizing volcanic rocks and pyroclasts because lava rheology is profoundly influenced by the crystal content. Crystallinity is typically quantified via microscopy, using transmitted light or backscattered electrons. However, many samples present visibly ambiguous textures such as intimate intergrowth of crystal phases, and/or crystal sizes extending down to the nanometer scale. Here, we apply calorimetric methods involving heat capacity and enthalpy to assess the crystallinity of a series of volcanic samples. We tested three different approaches, using differential scanning calorimetry, on 30–40 mg aliquots of powdered basalts from the 2018 Kīlauea lower East Rift Zone. The first approach involves determining the magnitude of the increase in heat capacity at the glass transition, which can determine crystallinity to a 1σ precision of ±3%. The second approach is based on the enthalpy of fusion, which requires a longer more complex procedure with results that are typically more uncertain than for the heat capacity method, with a 1σ of ±6%. A final method utilizing differences in enthalpies calculated from the heat capacities required the most complex procedure and has the greatest uncertainty of ±18%. Preliminary results for lavas with microscopically determined crystallinities ranging from 11 to 98% indicate that crystallinity based on calorimetric data can be tens of percent higher than the average value identified using microscopy and petrographic analysis. Image-based methodologies applied to sections of samples reveal spatial heterogeneity and details in texture and crystallinity, whereas calorimetry-based methodologies capture the overall ‘bulk sample’ properties, unbiased by section effects or imaging resolution limits. These techniques are a powerful combination that can present complementary views of crystallinity.  more » « less
Award ID(s):
1928923
PAR ID:
10537316
Author(s) / Creator(s):
; ; ; ;
Editor(s):
Zellmer, Georg F
Publisher / Repository:
Oxford University Press
Date Published:
Journal Name:
Journal of Petrology
Volume:
65
Issue:
5
ISSN:
0022-3530
Subject(s) / Keyword(s):
calorimetry heat capacity crystallinity lava flow Kilauea 2018 lower east rift zone eruption
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Volcanica)
    There is a broad consensus that magma eruptibility—the ability of magma stored in the subsurface to erupt onto Earth's surface—is strongly controlled by viscosity. Related to this, a critical parameter that controls viscosity is crystallinity. However, there is uncertainty in the crystallinities that distinguish eruptible from non-eruptible magmas, and whether highly crystalline magmas (>60 vol.%) could be erupted in some conditions. An underutilized but important source of information for understanding this relationship is the observed crystallinities in erupted volcanic materials, which by definition represent a set of eruptible magmas. Here we present a compilation of reported crystallinities for nearly 1000 volcanic samples of differing composition, tectonic setting, and eruption style, which provides valuable insight into the fundamental mechanisms which drive eruptions. Overall, the 95th percentile crystallinity value of our full dataset is 57 vol.%, and \>99 % of all non-dome samples have crystallinity ≤53 vol.%. This suggests that 50–60 vol.% crystallinity represents a fundamental limit for eruptibility for most volcanic rocks. Some dome samples are clear exceptions to this and are erupted with considerably higher crystallinities. There is also a significant correlation between crystallinity and whole rock SiO2 content as observed previously, but a shallow slope suggests whole rock and melt silica content have less impact on critical crystallinity for erupted magma than previously thought. Melt viscosity (as a function of SiO2, temperature, and H2O content) and crystallinity both play important roles on increasing effective viscosity, where melt viscosity plays a more important role at low crystal fractions, and crystallinity plays a more important role at crystallinities greater than ~40 vol.%. 
    more » « less
  2. ; ; ; ; ; ; (, American Mineralogist)
    Sodic volcano-plutonic terranes in the Archean can be well preserved, but why oxidized S-rich sodic magmas and porphyry-type Cu-Au deposits are so rare remains poorly understood. Here we addressed this issue by measuring the S concentration and S6+/ΣS ratio of primary apatite grains in >2.7 Ga felsic volcanic rocks from the well-characterized Neoarchean Abitibi Greenstone Belt of the Superior Province, Canada. Whereas apatite grains in most samples contain low-S concentrations (<0.01 wt%, n = 24), a few apatite samples are S-rich (0.14 ± 0.03 wt%, 1σ) and have low-S6+/ΣS ratios (0.56 ± 0.17; 1σ, n = 4). Samples with S-poor apatite have variable whole-rock La/Yb ratios (generally <30) and zircon 10 000*(Eu/Eu*)/Yb ratios of 11 ± 8 (1σ), which may be products of plume-driven or over-thickened crustal melting. In contrast, the samples with S-rich apatite have elevated La/Yb ratios of 49 ± 15 (1σ), zircon 10 000*(Eu/EuN*)/Yb ratios of 26 ± 7 (1σ), and zircon δ18O values of 5.8 ± 0.1 ‰ (1σ), consistent with a deep, hydrous and homogeneous mantle-like source for the melts dominated by amphibole ± garnet fractionation that is reminiscent of subduction-like process. These are the first reported results documenting the predominant accommodation of relatively reduced S in S-rich apatite grains crystallized from terrestrial silicate melts, possibly reflecting slight oxidation associated with the hydration of Neoarchean mantle and crystal fractionation over the magma evolution. The more common S-poor apatite data suggest that suppressed oxidation of the parental sodic magmas led to weak S emission from Earth’s interior to its evolving surface, explaining the rarity of porphyry-type Cu deposits in >2.7 Ga Archean sodic volcano-plutonic terranes. 
    more » « less
  3. ; ; ; ; (, Liquid Crystals)
    In high-resolution adiabatic scanning calorimetry (ASC) experiments, data for the temperature dependence of the specific enthalpy, h(T), and of the specific heat capacity, c(p)(T), are simultaneously obtained, from which the order of the phase transition and critical behaviour can be evaluated. ASC was applied to study the nematic to ferroelectric nematic phase transition (N-N-F) in the liquid crystal molecule 4-[(4-nitrophenoxy)carbonyl]phenyl 2,4-dimethoxybenzoate (RM734). The N-N-F was found to be very weakly first order with a latent heat Delta h = 0.115 +/- 0.005 J/g. The pretransitional specific heat capacity behaviour is substantially larger in the high-temperature N phase than in the low-temperature N-F phase. In both phases the power-law analysis of c(p)(T) resulted in a critical exponent alpha = 0.50 +/- 0.05 and amplitude ratio A(NF)/A(N) = 0.42 +/- 0.03. The very small latent heat and the value of alpha indicate that the N-N-F transition is close to a tricritical point. This is confirmed by a value of the order parameter exponent beta approximate to 0.25, recently obtained from electric polarisation measurements. Invoking two-scale-factor universality, it follows from the low value of A(NF)/A(N) ratio that the size of the critical fluctuations is much larger in the N-F phase than in the N phase. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al (, Journal of Materials Chemistry A)
    Nanoscale oxide-based negative electrodes are of great interest for lithium ion batteries due to their high energy density, power density and enhanced safety. In this work, we conducted a case study on mesoporous TiO 2 nanoparticle negative electrodes with uniform size and varying crystallinity in order to investigate the trend in the electrochemical properties of oxide-based nanoscale negative electrodes with varying crystallinity. Mesoporous solid spherical TiO 2 nanoparticles with a uniform particle size and varying crystallinity, i.e. , amorphous TiO 2 (A-TiO 2 ), partially crystalline TiO 2 (PC-TiO 2 ) and fully crystalline TiO 2 (FC-TiO 2 ) nanoparticles were studied. At low current rate (quasi steady-state), the specific capacity of the samples drops with the decrease of crystallinity. Ex situ synchrotron pair distribution function analysis reveals that the 1D zigzag Li ion diffusion pathway becomes expanded with the increase of crystallinity, which promotes ion mobility and charge storage. At high current rates (away from equilibrium states), however, the A-TiO 2 sample demonstrates slightly larger capacity than the FC-TiO 2 sample, both of which show larger capacities than that of the PC-TiO 2 sample. Both A-TiO 2 and FC-TiO 2 samples exhibit higher capacitive contribution to the charge storage and larger Li + diffusivity than those of the PC-TiO 2 sample, which explains their better rate capability. Moreover, the larger Li + diffusivity of the A-TiO 2 sample leads to the slightly larger specific capacity than the FC-TiO 2 sample at the highest current rate. 
    more » « less
  5. ; ; ; ; ; ; (, Advanced Materials Interfaces)
    Abstract Non‐volatile phase‐change memory (PCM) devices are based on phase‐change materials such as Ge2Sb2Te5 (GST). PCM requires critically high crystallization growth velocity (CGV) for nanosecond switching speeds, which makes its material‐level kinetics investigation inaccessible for most characterization methods and remains ambiguous. In this work, nanocalorimetry enters this “no‐man's land” with scanning rate up to 1 000 000 K s−1(fastest heating rate among all reported calorimetric studies on GST) and smaller sample‐size (10–40 nm thick) typical of PCM devices. Viscosity of supercooled liquid GST (inferred from the crystallization kinetic) exhibits Arrhenius behavior up to 290 °C, indicating its low fragility nature and thus a fragile‐to‐strong crossover at ≈410 °C. Thin‐film GST crystallization is found to be a single‐step Arrhenius process dominated by growth of interfacial nuclei with activation energy of 2.36 ±  0.14 eV. Calculated CGV is consistent with that of actual PCM cells. This addresses a 10‐year‐debate originated from the unexpected non‐Arrhenius kinetics measured by commercialized chip‐based calorimetry, which reports CGV 103−105higher than those measured using PCM cells. Negligible thermal lag (<1.5 K) and no delamination is observed in this work. Melting, solidification, and specific heat of GST are also measured and agree with conventional calorimetry of bulk samples. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email