skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: A Dynamic Model for Underwater Propulsion of an Amphibious Rover Developed From Kane’s Method
Abstract The Multi-terrain Amphibious ARCtic explOrer (MAARCO) rover is an amphibious arctic rover designed to traverse arctic terrains and propel through water. The MAARCO rover consists of an ellipsoid chassis with links connecting to the propulsion system. The propulsion system consists of two helical drives made up of hollow cylinder ballasts wrapped in auger or screw shaped blades in opposing helical directions parallel to each other. In this paper, a 6 degree of freedom dynamic model of the MAARCO rover is created using Kane’s method dynamic modeling to demonstrate the dynamic model capabilities for an underwater vehicle’s performance. The hydrodynamic forces considered on the underwater rover include drag, buoyancy, flow acceleration, and added mass. In addition to the hydrodynamic forces the rover will experience gravity forces, control forces, net thrust from the helical drive blades, and net buoyancy from the helical drive ballast system. The equations of motion are developed from Kane’s method to reduce computational cost and simulated in MATLAB for different cases to gain further understanding and provide a visual representation of the system underwater and the dynamic models capabilities. The results of the simulations show the MAARCO rover behavior in the hydrodynamic environment. The results reveal that the Kane’s method dynamic modeling successfully develops equations of motion of a complicated system that can be implemented into a control system.  more » « less
Award ID(s):
2116216
PAR ID:
10538006
Author(s) / Creator(s):
; ; ;
Publisher / Repository:
American Society of Mechanical Engineers
Date Published:
ISBN:
978-0-7918-8763-9
Format(s):
Medium: X
Location:
New Orleans, Louisiana, USA
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, American Society of Mechanical Engineers)
    Abstract The Multi-terrain Amphibious ARCtic explOrer (MAARCO) rover is an amphibious arctic rover designed to explore arctic regions in otherwise unsafe or restricted environments. The MAARCO rover consists of a propulsion system with two helical drives made up of hollow cylinder ballasts wrapped in auger or screw shaped blades that provide thrust to propel the vehicle as the drives rotate. Computational fluid dynamic methods provide a better understanding of the helical drives properties effects on hydrodynamic forces. In this paper, the computational fluid dynamic simulations are performed in ANSYS Fluent to observe the hydrodynamic properties of a helical drive. The drag and thrust on the helical drives are simulated for various helical drives with different blade heights and pitch lengths to determine general trends and characteristics of helical drives in water to optimize the vehicle’s abilities to navigate underwater. The helical drive drag is simulated using bluff body drag simulations with a prescribed velocity. The helical drive thrust is simulated using a multi-reference frame (MRF) mesh model with a frame motion replicate flow rotating around a stationary helical drive at a prescribed angular velocity. A convergence study was conducted to test different meshes and turbulence models to determine the most accurate drag and thrust simulation methods. The results demonstrate the effects the blade height and pitch length have on the helical drive thrust and drag properties, while maintaining a constant ballast diameter. From these results a helical drive design can be determined to optimize the net force and therefore the overall vehicle performance. 
    more » « less
  2. ; ; ; ; (, American Society of Mechanical Engineers)
    Abstract The diverse and heterogeneous terrains in the Arctic, consisting of snow, melting ice, permafrost, ice-covered lakes, sea ice and open ocean, pose serious challenges to locomotion and autonomous navigation capabilities of rovers deployed in the region for data collection and experimentation. The Multi-terrain Amphibious ARCtic explOrer or MAARCO rover is a proposed screw-propelled vehicle that uses helical drives (similar to Archimedes’ screws) to move seamlessly across the diverse terrains in the Arctic. The motion of a pair of helical drives operating in soft or fluid terrain is dictated by the response of the surrounding substrate to the stresses exerted by the rotating helical drives. If the substrate under the rover does not fail when it is moving in a straight line, the linear displacement of the rover (x) and the number of rotations of the helical drives (n) are related through x = P · n, where P is the pitch length of the helical drives. However, when the substrate fails, the linear displacement of the rover is less than P · n, i.e., x < P · n. Thus, “x = P · n” motion represents the optimal mode of operation for the rover when moving in a straight line. This paper represents the first ever attempt, to the best of author’s knowledge, to derive the conditions necessary for the application of the holonomic constraint x = P · n to the dynamics of a helical drives-based rover. 
    more » « less
  3. ; ; ; ; ; ; ; ; (, American Society of Mechanical Engineers)
    Abstract Helical drives (sometimes known as Archimedes’ screws) are a class of propulsion mechanism with the potential for application in amphibious, multi-terrain robotic ground vehicles such as Arctic rovers. Despite their simplistic construction, consisting of a screw-like rotating drum with a helically wound blade, their propulsion dynamics are complex and not well understood. There is a need for an experimental testing environment capable of controlling and recording the variables that characterize the dynamics of this terrestrial propulsion mechanism in order to experimentally validate dynamic and energetic modelling. Such variables include displacement, velocity, and acceleration of the mechanism in question in the x, y and z directions, as well as terramechanical properties such as substrate moisture content, subsequent density, and particulate size. This environment would also ideally be designed with modularity in mind in order to easily adapt to multiple different test conditions and terrestrial propulsion mechanisms. This paper describes the design of the experimental testing rig created to serve the above-described purpose. The apparatus is tested with an example of a helical screw drive at three different rover weights. Results of an initial test are shown, and the trends shown in the x position (longitudinal travel), z position (vertical travel), and effective pitch length are discussed. 
    more » « less
  4. ; ; ; ; (, American Society of Mechanical Engineers)
    Abstract Rovers designed for polar exploration primarily operate in flat and arid central plateau of the Antarctic and are unsuitable for multi-terrain operation such as slushy slow, wet soil, open ice and open ocean. The Multi-terrain Amphibious ARCtic explOrer or MAARCO rover is a design concept that employs a pair of helical drives in order to traverse the diverse landscape of the Arctic for autonomous research missions. A small-scale prototype (3:10 scale) of the MAARCO rover was developed to test terrestrial motion. The prototype is a screw-propelled vehicle that has two helical drives (similar to Archimedes’ screw) actuated by two independent motors to employ a differential steering system. The prototype performed several different maneuvers on a dry and wet sand — moving in a straight line, turning left, and turning right, and moving sideways by controlling the rotational speeds of the two drives. The sensors on the prototype collect data on angular orientation, linear acceleration and motor rotations. Through the tests the rover provided critical insight into the dynamics of the MAARCO rover, particularly, the effect of substrate failure or non-failure on the linear displacement of the rover. Further testing on different substrates and of the rover design on inclines surfaces will provide the MAARCO team valuable insight into designing a full-scale rover design. 
    more » « less
  5. ; (, Ocean Engineering)
    Developing an accurate dynamic model for an Autonomous Underwater Vehicle (AUV) is challenging due to the diverse array of forces exerted on it in an underwater environment. These forces include hydrodynamic effects such as drag, buoyancy, and added mass. Consequently, achieving precision in predicting the AUV's behavior requires a comprehensive understanding of these dynamic forces and their interplay. In our research, we have devised a linear data-driven dynamic model rooted in Koopman's theory. The cornerstone of leveraging Koopman theory lies in accurately estimating the Koopman operator. To achieve this, we employ the dynamic mode decomposition (DMD) method, which enables the generation of the Koopman operator. We have developed a Fractional Sliding Mode Control (FSMC) method to provide robustness and high tracking performance for AUV systems. The efficacy of the proposed controller has been verified through simulation results. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email