An official website of the United States government
Brittle faults in the southern Ford Ranges of Marie Byrd Land, West Antarctica, provide unique opportunity to study fluid-rock interactions in the West Antarctic Rift System and the role of crustal fluids during regional-scale faulting. This fault array contains steep, NNW-striking, normal-oblique slip faults and sub-vertical WNW-ESE strike-oblique faults. \ Faults at Mt. Douglass, Mt. Dolber, and Lewissohn Nunatak display strongly aligned tourmaline, indicating syntectonic mineralization; surfaces in one location feature distinctive mirror surfaces, suggestive of formation during seismic slip. Tourmaline has been demonstrated to resist chemical and isotopic re-equilibration during even high-temperature metamorphism, and to maintain a record of conditions during formation, therefore oxygen isotope compositions of tourmaline and quartz pairs may elucidate crustal conditions (e.g. temperatures and fluid-rock ratios) and fluids sources. Analyzed tourmaline and quartz were separated from the upper ~2mm of the fault surfaces; host rocks are tourmaline-free. Tourmaline 18O ratios (n=4) fall within a range of +9.2 to +10.4 ± 0.1 ‰ VSMOW (average 9.7‰, StDev = 0.7). Paired quartz yield 18O values of +11.1 to +10.3 ± 0.1 ‰; ∆Qtz-Trm values between 1.3 and 2.0 may reflect an inability of quartz to equilibrate during tourmaline crystallization. Equilibrium between quartz and tourmaline would suggest temperatures of formation in excess of 550°C. Relative isotopic homogeneity between sites suggests similar fluid conditions were present across the region and supports field evidence for that the structures form a regional fault array. Geometric and kinematic relationships suggest a link to deeper level shears hosting muscovite, and sillimanite with garnet. On-going investigation includes O isotope analyses of these shears, as well as analysis of H and B isotopes in tourmaline, which will better characterize the relationship between the deeper crustal shears with the brittle fault array, and the fluid sources and metasomatic processes of regional fault systems. Furthermore, temporal constraints on tourmaline mineralization will establish whether faulting is associated with Cretaceous intracontinental extension of the West Antarctic rift system (Siddoway 2008) or a crustal response to Neogene mantle delamination beneath the South Pole region (Shen et al 2018).
more »
« less
Investigation of tourmaline-mineralized mirrored brittle faults from West Antarctica using ∂O (qz-tur), tourmaline Ar/Ar thermochronology, and brittle kinematic analysis, GSA Abstracts with Program, 56(4), doi: 10.1130/abs/2024CD-399623.
Brittle faults are widespread but rarely exposed in Marie Byrd Land, a part of the West Antarctic rift system, owing to enhanced erosion of zones of cataclasis by the regional ice sheet. Tourmaline-mineralized faults discovered at three locations in the Ford Ranges constitute a new record of fluid-rock interactions in this region of extended crust. Tourmaline resists re-equilibration, even during metamorphism, thus strongly aligned tourmaline from high-angle faults at Mt. Douglass, Mt. Dolber, and Lewissohn Nunatak likely contain direct records of fault-hosted fluids and timing of fault movements. The faults form an array oriented NNW-SSE and WNW-ESE, which displays brittle kinematic criteria indicating normal-oblique and strike-oblique displacement. Mirrored fault surfaces suggest formation during seismic slip. Tourmaline is concentrated within a 2 to 4 mm zone bordering the fault planes. Petrography and EMPA analyses show unzoned tourmaline , with the dravite variety at Lewissohn Nunatak and schorl at the other two sites. Fluid inclusions in dravite are tubular (A-axis-parallel), 10 to 15 um, and up to 25 um, in length, containing gas and fluid phases. Fluid inclusions in schorl are C-axis-parallel and breached. Tourmaline ∂18O ratios (n=4) range from 9.2 to 10.4 ± 0.1 ‰ VSMOW (average 9.7‰, s.dev. = 0.7). Paired quartz yield ∂18O values of 11.1 to 10.3 ± 0.1 ‰, and ∆Qtz-Trm values between 1.3 and 2.0. Brittle microfractures in parallel arrays, evident in thin section, indicate tensile opening along ENE- WSW axes, in accordance with outcrop evidence. The strong preferred orientation and uniform mineral composition of tourmaline indicate syntectonic growth of tourmaline along fault planes. ∆Qtz-Trm values suggest equilibration between host-rock quartz and tourmaline was not achieved, likely due to rapid tourmaline precipitation. Relative isotopic homogeneity between sites suggests similar fluid conditions across the region, for crust underlying a minimum area of 2000 km2. Preliminary results of tourmaline 40Ar/39Ar dating indicate broadly Cretaceous timing for fault-related fluid flow. Ongoing work seeks to determine the temperature of mineralizing fluids and evaluate whether the brittle array localizes geothermal heat beneath the contemporary icesheet.
more »
« less
- Award ID(s):
- 1917176
- PAR ID:
- 10538021
- Publisher / Repository:
- Geological Society of America
- Date Published:
- Volume:
- 56
- Issue:
- 4
- Page Range / eLocation ID:
- 2024CD-399623
- Subject(s) / Keyword(s):
- Marie Byrd Land brittle fault fault mirror tourmaline d18O geothermal heat fluid flow
- Format(s):
- Medium: X
- Location:
- Geological Society of America Cordilleran/Rocky Mountain Section Meeting, Spokane, WA
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Stable isotope (δ18O, δD, δ11B) ratios of fault surface and shear zone minerals sampled from Marie Byrd Land in the West Antarctic rift system (WARS) provide opportunity to monitor potential fluid transport across multiple levels of the crust during active rifting. In the upper crust, high-angle brittle faults in the southern Ford Ranges display tourmaline-mineralized surfaces at Mt. Douglass, Mt. Dolber, and Lewissohn Nunatak. Tourmaline are strongly aligned with fault striae indicating mineralization during normal-oblique and strike-oblique displacement, with dilatancy allowing fluid infiltration of fault surfaces. Tourmaline’s refractory nature preserves isotopic compositions, which serve as a proxy for fluid sources and water-rock ratios. We compare tourmaline isotopic ratios with those of muscovite and quartz that occupy progressively deeper, kinematically linked fault-shear networks, and high-grade sillimanite-garnet-quartz±biotite associations, with the objective of characterizing potential fluid sources, relative depths of fluid interactions, and eventual estimation of volume of migrated fluids. Tourmaline δ18O values range from 9.1 and 10.4 ± 0.2 ‰ VSMOW (avg.= 9.8 ‰; st.dev. = 0.6), with intrasample reproducibility from 0.9 ‰ to 1.2‰, either as the result of variation in fluid sources or minor fluctuations in temperature during tourmaline formation. Quartz δ18O ratios range from 11.1 to 10.3 ± 0.2 ‰ (avg. =11.0‰; st.dev. = 0.64), with paired ∆Qtz-Tur values lower than quartz calculated to be in equilibrium with tourmaline at 450°C. Calculated qtz-tur temperatures exceed values reasonable for brittle crust (>700°C), indicating tourmaline grew rapidly or quartz has undergone subsolidus reequilibration. Fluids calculated to be in equilibrium with tourmaline at 450°C range from 8.2 to 9.5‰. Tourmaline 40Ar/39Ar geochronology in progress yields Early Cretaceous dates, indicating mineralization coincided with rifting onset. Very rapid development of the WARS and high thermal gradients during ENE- WSW transtension promoted upward movement of fluids in equilibrium with magmatic bodies or dehydrating metamorphic or sedimentary protolith. Tourmaline of Mt. Douglass and Mt. Dolber yield δD values of –60 and –64‰; these values confirm the role of fluids derived from mid crustal sources transported to the upper crust through fault-shear network.more » « less
-
Outcrops of brittle faults are rare in Marie Byrd Land, West Antarctica, because fault damage zones commonly undergo enhanced erosion and form bedrock troughs occupied by glacier ice. Where exposures do exist, faults yield information about regional strain in the West Antarctic Rift System (WARS) and may host minerals that contain a record of the temperature and chemistry of fluids during regional-scale faulting. In MBL’s southern Ford Ranges, bordering Ross Sea, a distinctive fault array was sampled that hosts tourmaline and quartz, a mineral-pair that can provide temperature and composition of fault-associated fluids, using 18O. Host rocks are tourmaline-free. At three separate sites, fault surfaces display strongly aligned tourmaline, suggesting that mineralization occurred during tectonism. One site features highly polished, or mirrored, surfaces, a characteristic that may indicate tourmaline precipitation during seismic slip. The orientation and kinematics of the high angle faults are NNW-striking: normal-slip, and WNW-ESE striking: right-lateral strike-slip. The timing of mineralization is yet to be determined, but viable possibilities are that the faults formed during broad intracontinental extension during formation of Ross Embayment in the Cretaceous, or during development of deep, narrow basins beneath the RIS grounding zone, in the Neogene (newly detected, see Tankersley et al., this meeting). Once formed, tourmaline is resistant to chemical and isotopic re-equilibration, and therefore can retain a record of its conditions during formation. We used oxygen isotope compositions of tourmaline and quartz pairs to investigate temperatures, fluid-rock ratios, and fluid sources, with bearing on fault-localized flux of fluids and geothermal heat. Analyzed tourmaline and quartz were separated from the upper ~2mm of the fault surfaces, as well as quartz separated from host rock in the same hand samples. Tourmaline 18O ratios (n=4) fall within a range of +9.2 to +10.4 ± 0.1 ‰ VSMOW (average 9.7‰, StDev = 0.7). Paired quartz yield 18O values of +11.1 to +10.3 ± 0.1 ‰. Relative isotopic homogeneity between sites suggests similar fluid conditions were present across the region and supports field evidence for that the structures form a regional fault array. ∆Qtz-Trm values fall between 1.3 and 2.0, and 18O of quartz in faults closely resembles 18O of host rock quartz. We tentatively determine the water oxygen isotope ratio as greater than ~7.7 ‰. Plutonic-metamorphic associations in the immediate region, and comparisons with similar faults elsewhere (i.e. Isola d’Elba, Italy), suggest temperatures as high as 500°C for the fluids that circulated into the faults. The data are interpreted to show that brittle faults provided pathways for hot fluids derived from mid-crustal processes to make their way to shallow crustal depths. 18O values indicate magmatic and/or metamorphic fluid sources, with minor to no introduction of meteoric fluids. Tourmaline-quartz pairs did not attain equilibrium, likely due to tourmaline’s rapid crystallization. On-going investigation includes analysis of H and B isotopes in tourmaline, which will better characterize the relationship between fault-hosted and mid-crustal fluids.more » « less
-
Abstract Fluids are commonly invoked as the primary cause for weakening of detachment shear zones. However, fluid-related mechanisms such as pressure-solution, reaction-enhanced ductility, reaction softening and precipitation of phyllosilicates are not fully understood. Fluid-facilitated reaction and mass transport cause rheological weakening and strain localization, eventually leading to departure from failure laws derived in laboratory experiments. This study focuses on the Miocene Raft River detachment shear zone in northwestern Utah. The shear zone is localized in the Proterozoic Elba Quartzite, which unconformably overlies the Archaean basement, and consists of an alternating sequence of quartzite and muscovite-quartzite schist. In this study, we characterize fluid-related microstructures to constrain conditions that promoted brittle failure in a plastically deforming shear zone. Thin-section analyses reveal the presence of healed microcracks, transgranular fluid inclusion planes and grain boundary fluid inclusion clusters. Healed microcracks occur in three sets, one sub-perpendicular to the mylonitic foliation, and a set of two conjugate microcracks oriented at ∼40–60° to the mylonitic foliation. Healed microfractures are filled with quartz, which has a distinct fabric, suggesting that microcracks healed while the shear zone was still at conditions favourable for quartz crystal plasticity. Transgranular fluid inclusion planes also occur in three sets, similar in orientation to the healed microfractures. Fluid inclusions commonly decorate grain and subgrain boundaries as inter- and intragranular clusters. Our results document ductile overprint of brittle microstructures, suggesting that, during exhumation, the Raft River detachment shear zone crossed the brittle–ductile transition repeatedly, providing pathways for fluids to permeate through this shear zone.more » « less
-
Abstract Arc magmas are produced from the mantle wedge, with possible addition of fluids and melts derived from serpentinites and sediments in the subducting slab. Identification of various sources and their relevant contributions to such magmas is challenging; in particular, at continental arcs where crustal assimilation may overprint initial geochemical signatures. This study presents oxygen isotopic compositions of zoned olivine grains from post-caldera basalts and boron contents and isotopes of these basalts and glassy melt inclusions hosted in quartz and clinopyroxene of silicic tuffs in the Toba volcanic system, Indonesia. High-magnesian (≥87 mol% Fo [forsterite]) cores of olivine in the basalts have δ18O values ranging from 5.12‰ to 6.14‰, indicating that the mantle source underneath Toba is variably enriched in 18O. Olivine with <87 mol% Fo has highly variable (4.8–7.2‰), but overall increased, δ18O values, interpreted to reflect assimilation of high δ18O crustal materials during fractional crystallization. Mass balance calculations constrain the overall volume of crustal assimilation for the basalts as ≤13%. The processes responsible for the 18O-enriched basaltic melts are further constrained by boron data that indicate the addition of <0.1 wt% fluids to the mantle, >40% of the fluids being derived from serpentinites and others from altered oceanic crust and sediments. This amount of fluids can increase δ18O of the magma by only ~0.02‰. Approximately 6–9% sediment-derived melt hybridization in the mantle wedge is further needed to yield basaltic melts with δ18O values in equilibrium with those of the high-Fo olivine cores. The cogenetic silicic tuffs, on the other hand, seem to record a higher proportion of fluid addition dominated by sediment-derived fluids to the mantle source, in addition to crustal assimilation. Our reconnaissance study therefore demonstrates the application of combined B and O isotopes to differentiate between melts and fluids derived from serpentinites and sediments in the subducted slab—an application that can be applied to arc magmas worldwide.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- The DOI is not currently available.
