skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Class-D Amplifier-Based Core Loss Measurements for High Frequency Magnetic Materials
Magnetic core loss measurement methods suitable for high-frequency sinusoidal excitations are currently time intensive or inherently suffer from flux drive limitations due to the costly and ill-suited radio frequency (RF) equipment utilized in the measurement. The recent development of automated testers has enabled the collection of large core loss data sets across a broad range of operating frequencies and flux densities. Improper loading of the RF power amplifiers utilized in these measurements makes the collection of accurate core loss data impractical above certain drive levels. In this paper, we develop and demonstrate an automatable core loss testing method which replaces the commonly employed RF power amplifier with a high frequency switching inverter. An analytical framework for assessing flux harmonics in the core is also presented. An experimental demonstration is performed in the range of 1-7MHz for the following materials: (1) Fair-Rite 67, (2) Fair-Rite 80, and (3) Proterial ML91S.  more » « less
Award ID(s):
2330525
PAR ID:
10546805
Author(s) / Creator(s):
; ;
Publisher / Repository:
IEEE
Date Published:
Journal Name:
IEEE Workshop on Control and Modeling for Power Electronics
ISSN:
2151-1004
ISBN:
979-8-3503-0723-8
Page Range / eLocation ID:
1 to 8
Format(s):
Medium: X
Location:
Lahore, Pakistan
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, 2017 IEEE 6th International Conference on Renewable Energy Research and Applications (ICRERA))
    Development of the new generation of high power and high frequency power electronic switches along with the need for compact controllable converters for utilization of distributed energy resources in the grid, have led to significant developments in the area of solid state transformers in the last years. The design process of a high frequency transformer as the main element in the solid state transformer is illustrated in this article. A multi winding transformer for multiport SST application is designed, studied and built in this research. In a MPSST several windings feed the core. As the result, coupling coefficient between each pair of windings, become an important factor which is studied in this study. Since the transformer is designed for high frequency applications, the power loss in the wire and core of the transformer increases as the result of higher skin effect and eddy current loss in high frequency. Three important factors in the design of HF transformer for MPSST are discussed in the paper. First, four different possible core materials are compared based on their flux density, frequency range, loss and price. Then the cable selection is illustrated and finally, different winding placement and distribution on the same core are suggested and the inductance and coupling coefficient matrices are calculated using ANSYS Maxwell 3D simulation. The transformer is built in the lab and the inductance values matches the expected values from the simulation. 
    more » « less
  2. ; (, IEEE Workshop on Control and Modeling for Power Electronics)
    This paper describes challenges to automated bulk collection of temperature-controlled magnetic core loss data in the 1-20 MHz regime. Oil immersion is shown to alter the small signal impedance of ML91S and FR67 ferrite cores by more than 5% over part of their rated frequency ranges which prevents accurate estimation of core loss. Air-based thermal forcing is shown to be a viable alternative to oil for core temperature regulation in high frequency core loss testers. Temperature regulation to 25 ± 3°C is demonstrated on FR80 at 1 MHz up to 1.25 W of dissipation. 
    more » « less
  3. ; ; ; ; ; ; ; (, IEEE Sensors Conference)
    This paper presents the design and measurement results of wireless power transfer through soil over a range of soil moisture levels for future low-cost, wireless, battery-less, and in-situ soil health monitoring technologies. A pair of packaged 6 cm-diameter coils can wirelessly transfer 0.56 mW from an external RF power source of 37 mW through a soil depth of 15 cm over a typical moisture level ranging from low 30% to 40%. An optimal frequency of 1.4 MHz and 1 MHz was chosen for an efficient operation in loamy soil and sandy soil, respectively. The demonstrated power transfer is sufficient to energize underground soil health monitoring devices. In addition, a pair of packaged 12 cm-diameter coils, taking the loss contributed by the surrounding soil into design consideration, can achieve a 130 µW power delivery with an efficiency of approximately 8% over a 30 cm air gap. It is expected that a similar performance can be achieved through a 30 cm soil depth. 
    more » « less
  4. ; ; ; ; ; (, 2019 IEEE MTT-S International Microwave Symposium (IMS))
    This paper presents a dual-band RF rectifying circuit for wireless power transmission at 1.17 GHz and 2.4 GHz. A dual-band harmonic-tuned inverse-class F/class-F mode power amplifier using a 10 W GaN device has been utilized to implement the proposed rectifier with an on-board coupler and phase shifter. The matching circuit is precisely designed so that the circuit operates in inverse class F and class F mode in the lower and upper frequency bands using dual-band harmonic tuning, respectively. Measurement results show that the rectifier circuit has 78% and 76% efficiencies at 1.17 GHz and 2.4 GHz frequency bands, respectively. To the best of the authors' knowledge, this rectifier is the first demonstration of a dual-band harmonic-tuned synchronous rectifier using a GaN HEMT device with an integrated coupler and phase-shifter for a watt-level RF input power. 
    more » « less
  5. ; ; ; ; (, Review of Scientific Instruments)
    Radio frequency (RF) signals are frequently used in emerging quantum applications due to their spin state manipulation capability. Efficient coupling of RF signals into a particular quantum system requires the utilization of carefully designed and fabricated antennas. Nitrogen vacancy (NV) defects in diamond are commonly utilized platforms in quantum sensing experiments with the optically detected magnetic resonance (ODMR) method, where an RF antenna is an essential element. We report on the design and fabrication of high efficiency coplanar RF antennas for quantum sensing applications. Single and double ring coplanar RF antennas were designed with −37 dB experimental return loss at 2.87 GHz, the zero-field splitting frequency of the negatively charged NV defect in diamond. The efficiency of both antennas was demonstrated in magnetic field sensing experiments with NV color centers in diamond. An RF amplifier was not needed, and the 0 dB output of a standard RF signal generator was adequate to run the ODMR experiments due to the high efficiency of the RF antennas. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email