An enhanced Cu-based friction material was prepared by the powder metallurgy techniques and proposed for use in the dry clutch system. The friction characteristics and wear rate of this friction material sliding against 65Mn steel are obtained using Universal Material Tester-5. The friction pairs were subjected to two operating variables, which are sliding speed and temperature. The effect of these variables during the engagement process of the friction pairs is investigated. Knowing the normal applied force and dimension of the clutch disc, the dynamic friction coefficient was translated to friction torque capacity with time. It was found that instability can be excited at low operational conditions when the resulting friction coefficient is high. At 25 ℃, the dynamic friction torque oscillates with time likewise at 400 ℃. Generally, a more stable friction torque is obtained when the sliding speed is varied compared to varying the temperatures. Moreover, the influence of the operating temperatures and sliding speeds on thermal buckling and thermoelastic instability of the friction disc is the second consideration in this work. The onset of thermoelastic instability occurs when the sliding speed exceeded 200 r/min and the results for the growth rate of hot spots were found to agree well with the critical speed of the system. Also, thermal buckling was highly dependent on the temperature difference between the inner and outer radius of the friction disc.
more » « less- Award ID(s):
- 1928876
- NSF-PAR ID:
- 10546939
- Publisher / Repository:
- SAGE Publications
- Date Published:
- Journal Name:
- Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Volume:
- 235
- Issue:
- 6
- ISSN:
- 1350-6501
- Format(s):
- Medium: X Size: p. 1114-1123
- Size(s):
- p. 1114-1123
- Sponsoring Org:
- National Science Foundation
More Like this
-
Effect of Wear on Thermoelastic Instability Involving Friction Pair Thickness in Automotive ClutchesAbstract Wear is an inevitable phenomenon in the working process of clutch and brake system. With the increase of transmission speed and power density, the thermoelastic instability (TEI) of clutch and brake system is becoming more serious over time. It is difficult to obtain the practical solution for conventional materials of clutches and brakes and their actual geometry with finite thickness using the existing analytical method. To study the comprehensive effects of wear and friction pair thickness on TEI, Archard Wear Law is combined with the Fourier Reduction Method to develop a finite element model, the accuracy of which is validated using the existing analytical method. Within the usual ranges of thickness and wear coefficient of friction pair, the increase of friction material thickness or the decrease of steel material thickness will suppress the TEI. Nonetheless, if the wear-rate is increased significantly, the effect of friction material thickness will be reversed. The worst thickness, which must be avoided in the design, and the local optimum thickness exist for the steel material.more » « less
-
Metallic friction materials currently used in industry may adversely impact the environment. Substitutions for metals in friction materials, on the other hand, can introduce operational safety issues and other unforeseeable problems such as thermal-mechanical instabilities. In this work, a molecular dynamics model has been developed for investigating the effects of material composition, density, and surface asperities on the tribological properties of inorganic 3C-SiC under various contact conditions at the atomic level. Predictions on the following results have been made: (1) elastic modulus, (2) tensile strength, (3) thermal conductivity, and (4) friction coefficient. The research findings can help improve the design of metal-free friction materials against thermal-mechanical failures. Parametric studies were performed by varying a number of conditions including (1) ambient temperature, (2) sliding speed, (3) crystal orientation, (4) asperity size, (5) degree of asperity intersection, (6) types of loading, and (7) surface contact. Plastic deformation and material transfer were successfully modeled between two sliding pairs. Some of the computational results were validated against existing experimental data found in the literature. The evaluation of wear rate was also incorporated. The model can easily be extended to deal with other nonmetallic friction composites.more » « less
-
Buckling and postbuckling of automotive clutch disks can be excited by the temperature fields caused by frictional heat generation during engagement of clutch systems. Linear and nonlinear buckling finite element analyses are performed to evaluate the thermal postbuckling of clutch metal disks. The dominant buckling modes are first obtained through performing linear buckling finite element analysis (FEA) analyses. The scaled displacement fields obtained from the linear buckling FEA analyses are added to the original geometries to generate the perturbed meshes. The postbuckling is then investigated by performing nonlinear buckling FEA analyses. The commercial FEA software ABAQUS is used in the current study. The effects of the temperature-dependent material properties are studied. It is concluded that the temperature dependence of material properties affects the postbuckling behaviors significantly.more » « less
-
Abstract At seismic slip rates, flash‐weakening can significantly reduce the coefficient of friction, and the magnitude of weakening increases with surface temperature. To quantify the distribution of flash temperature, high‐speed double‐direct shear experiments were conducted on Westerly granite blocks using velocity steps from 1 mm/s to 900 mm/s at 9 MPa normal stress. We employed a high‐speed infrared camera to measure surface temperatures on the moving block during sliding, and utilized a novel sliding‐surface geometry to control the mm‐scale contact history. Following the initial weakening upon the velocity step, the blocks slide at a constant coefficient of friction. Surface temperatures are inhomogeneously distributed across the sliding surface, and increase with displacement. To determine the local normal stress distribution at the mm‐scale, we combine a one‐dimensional thermal model with conventional flash‐weakening models that incorporate a surface temperature‐dependence informed by the controlled, mm‐scale contact history. Early contacts experience local normal stress exceeding 40 times the applied normal stress. As sliding progresses, the local normal stress at the hottest contacts decreases as contact area increases, leading to local normal stresses ranging from 2 to 6 times the applied normal stress on most contacts by 30 mm of slip. Increases in surface temperature, which would decrease the coefficient of friction, are buffered by wear processes that increase contact area and decrease the local normal stress. Treatments of flash heating are advanced by incorporating improved characterization of the state of the sliding surface at the mm and larger scales during sliding.
-
The friction and wear behavior of palladium (Pd)-rich amorphous alloy (Pd43Cu27Ni10P20) against 440C stainless steel under ionic liquids as lubricants, i.e., 1-nonyl-3-methylimidazolium bis[(trifluoromethane)sulfonyl]amide ([C9C1im][NTf2]), were investigated using a ball-on-disc reciprocating tribometer at ambient, 100 and 200 °C with different sliding speeds of 3 and 7 mm/s, whose results were compared to those from crystalline Pd samples. The measured coefficient of friction (COF) and wear were affected by both temperature and sliding speed. The COF of crystalline Pd samples dramatically increased when the temperature increased, whereas the COF of the amorphous Pd alloy samples remained low. As the sliding speed increased, the COF of both Pd samples showed decreasing trends. From the analysis of a 3D surface profilometer and scanning electron microscopy (SEM) with electron dispersive spectroscopy (EDS) data, three types of wear (i.e., delamination, adhesive, and abrasive wear) were observed on the crystalline Pd surfaces, whereas the amorphous Pd alloy surfaces produced abrasive wear only. In addition, X-ray photoelectron spectroscopy (XPS) measurements were performed to study the formation of tribofilm. It was found that the chemical reactivity at the contacting interface increased with temperature and sliding contact speed. The ionic liquids (ILs) were effective as lubricants when the applied temperature and sliding speed were 200 °C and 7 mm/s, respectively.more » « less