Additive manufacturing promises to revolutionize manufacturing industries. However, 3D printing of novel build materials is currently limited by constraints inherent to printer designs. In this work, a bench-top powder melt extrusion (PME) 3D printer head was designed and fabricated to print parts directly from powder-based materials rather than filament. The final design of the PME printer head evolved from the Rich Rap Universal Pellet Extruder (RRUPE) design and was realized through an iterative approach. The PME printer was made possible by modifications to the funnel shape, pressure applied to the extrudate by the auger, and hot end structure. Through comparison of parts printed with the PME printer with those from a commercially available fused filament fabrication (FFF) 3D printer using common thermoplastics poly(lactide) (PLA), high impact poly(styrene) (HIPS), and acrylonitrile butadiene styrene (ABS) powders (< 1 mm in diameter), evaluation of the printer performance was performed. For each build material, the PME printed objects show comparable viscoelastic properties by dynamic mechanical analysis (DMA) to those of the FFF objects. However, due to a significant difference in printer resolution between PME (X–Y resolution of 0.8 mm and a Z-layer height calibrated to 0.1 mm) and FFF (X–Y resolution of 0.4 mm and a Z-layer height of 0.18 mm), as well as, an inherently more inconsistent feed of build material for PME than FFF, the resulting print quality, determined by a dimensional analysis and surface roughness comparisons, of the PME printed objects was lower than that of the FFF printed parts based on the print layer uniformity and structure. Further, due to the poorer print resolution and inherent inconsistent build material feed of the PME, the bulk tensile strength and Young’s moduli of the objects printed by PME were lower and more inconsistent (49.2 ± 10.7 MPa and 1620 ± 375 MPa, respectively) than those of FFF printed objects (57.7 ± 2.31 MPa and 2160 ± 179 MPa, respectively). Nevertheless, PME print methods promise an opportunity to provide a platform on which it is possible to rapidly prototype a myriad of thermoplastic materials for 3D printing.
more »
« less
This content will become publicly available on June 15, 2025
Surface‐methacrylated microcrystalline cellulose bioresins with soybean oil for additive manufacturing via vat photopolymerization
The additive manufacturing (AM) industry increasingly looks to differentiate itself by utilizing materials and processes that are green, clean, and sustainable. Biopolymers, bio‐sourced raw materials and light weighting of parts 3D printed with photopolymer resins each represent critical directions for the future of AM. Here, we report a series of bio‐based composite resins with soybean oil derivatives, up to 20% by weight of surface‐methacrylated micro‐crystalline cellulose (MCC) and 60% total bio‐based content for vat photopolymerization based additive manufacturing. The ultimate tensile strengths of the materials were found to increase up to 3X, the Young's moduli increased up to 10X, and the glass transition temperature increased by 11.3°C when compared to the neat resin without surface‐methacrylated MCC as a filler. Working curves and shrinkage factors were used to demonstrate how the surface‐methacrylated MCC causes changes in the dimensions of printed parts, to facilitate development of optimized print parameters based on the UV intensity of the 3D printer being used. These results will allow further development of commercial 3D printable resins with a high concentration of bio‐based fillers that print well and perform on par with conventional resins.
more »
« less
- PAR ID:
- 10553083
- Publisher / Repository:
- Wiley
- Date Published:
- Journal Name:
- Journal of Polymer Science
- Volume:
- 62
- Issue:
- 12
- ISSN:
- 2642-4150
- Page Range / eLocation ID:
- 2692 to 2703
- Subject(s) / Keyword(s):
- 3D printing, bio-based polymers, cellulose, polymer composites
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
IMECE2022-88301 Additive manufacturing (AM) is transforming industrial production. AM can produce parts with complex geometries and functionality. However, one of the biggest challenges in the AM world is limited material options. The purpose of this research is to develop new material mixtures and determine their mechanical properties for use at the MSOE Rapid Prototyping Center and provide valuable insight into beta materials for use in AM industry. Elastomeric polyurethane (EPU 40) and Rigid polyurethane (RPU 70), resins developed by Carbon3D, are employed for this research. Initially, EPU 40 (100%) and RPU 70 (100%) were used to print tensile and hardness test specimens so that their mechanical properties could be compared to the standard values presented by Carbon3D and used as benchmarks for newly developed material. Mixtures of the two materials, EPU 40 and RPU 70, in multiple ratios were then created and used to print tensile and hardness test specimens. Data collected from tensile and hardness tests show that EPU 40 and RPU 70 can be combined in various ratios to obtain material properties that lie between the two individual components. In addition to developing these new materials, the effect of printing orientation on mechanical properties was also studied in this paper.more » « less
-
Additive manufacturing (AM), also known as three-dimensional (3D) printing, is thriving as an effective and robust method in fabricating architected piezoelectric structures, yet most of the commonly adopted printing techniques often face the inherent speed-accuracy trade-off, limiting their speed in manufacturing sophisticated parts containing micro-/nanoscale features. Herein, stabilized, photo-curable resins comprising chemically functionalized piezoelectric nanoparticles (PiezoNPs) were formulated, from which microscale architected 3D piezoelectric structures were printed continuously via micro continuous liquid interface production ( μ CLIP) at speeds of up to ~60 μ m s -1 , which are more than 10 times faster than the previously reported stereolithography-based works. The 3D-printed functionalized barium titanate (f-BTO) composites reveal a bulk piezoelectric charge constant d 33 of 27.70 pC N -1 with the 30 wt% f-BTO. Moreover, rationally designed lattice structures that manifested enhanced, tailorable piezoelectric sensing performance as well as mechanical flexibility were tested and explored in diverse flexible and wearable self-powered sensing applications, e.g., motion recognition and respiratory monitoring.more » « less
-
Non-destructive characterization of 3D printed parts is critical for quality control and adoption of additive manufacturing (AM). The low-cost driver for AM of thermoplastics, typically through material extrusion AM (MEAM), challenges the integration of real-time, operando characterization and control schemes that have been developed for metals. Here, we demonstrate that the surface topology determined from optical profilometry provides information about the mechanical response of the printed part using commercial ABS filaments through calibration based correlations. The influence of layer thickness was examined on the tensile properties of MEAM ABS. Surface topology was converted into amplitude spectra using fast Fourier transforms. The scatter in the tensile strength of the replicate samples was well represented by the differences in the amplitude of the two fundamental waves that describe the periodicity of the printed roads. These results suggest that information about previously printed layers is transferred to subsequent layers that can be resolved from optical profilometry and offers the potential of a rapid, nondestructive post-print characterization for improved quality control.more » « less
-
Purpose There is recent emphasis on designing new materials and alloys specifically for metal additive manufacturing (AM) processes, in contrast to AM of existing alloys that were developed for other traditional manufacturing methods involving considerably different physics. Process optimization to determine processing recipes for newly developed materials is expensive and time-consuming. The purpose of the current work is to use a systematic printability assessment framework developed by the co-authors to determine windows of processing parameters to print defect-free parts from a binary nickel-niobium alloy (NiNb5) using laser powder bed fusion (LPBF) metal AM. Design/methodology/approach The printability assessment framework integrates analytical thermal modeling, uncertainty quantification and experimental characterization to determine processing windows for NiNb5 in an accelerated fashion. Test coupons and mechanical test samples were fabricated on a ProX 200 commercial LPBF system. A series of density, microstructure and mechanical property characterization was conducted to validate the proposed framework. Findings Near fully-dense parts with more than 99% density were successfully printed using the proposed framework. Furthermore, the mechanical properties of as-printed parts showed low variability, good tensile strength of up to 662 MPa and tensile ductility 51% higher than what has been reported in the literature. Originality/value Although many literature studies investigate process optimization for metal AM, there is a lack of a systematic printability assessment framework to determine manufacturing process parameters for newly designed AM materials in an accelerated fashion. Moreover, the majority of existing process optimization approaches involve either time- and cost-intensive experimental campaigns or require the use of proprietary computational materials codes. Through the use of a readily accessible analytical thermal model coupled with statistical calibration and uncertainty quantification techniques, the proposed framework achieves both efficiency and accessibility to the user. Furthermore, this study demonstrates that following this framework results in printed parts with low degrees of variability in their mechanical properties.more » « less
