skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Eye in the Sky: 360° Inspection of Bridge Infrastructure Using Uncrewed Aerial Vehicles (UAVs)
Bridges play a key role in supporting the transportation network in the United States. The 2021 infrastructure report card prepared by ASCE highlighted that more than 40% of bridges in the U.S. are over 50 years old. Some of these bridges are classified as structurally deficient, even though they are safe to travel. To address these challenges, highway agencies are exploring innovative technologies to conduct inspections and realize benefits in relation to access, cost, and safety. Federal and state DOTs have conducted several studies on the application of uncrewed aerial vehicles (UAVs) for bridge health monitoring. This study identified the existing knowledge gap in performing 360° inspection of bridges. In this current research, UAVs were demonstrated for conducting 360° inspections of three different bridges in Alaska. The locations of the aerial images during the inspections were also pictographically represented to provide a holistic idea for the highway agencies and practitioners. Three-dimensional models representing the actual conditions of the bridge were generated and used for comparing the bridge condition assessments with traditional inspection reports. Infrared imagery was also collected to identify the effect of thermal loading in assessing the conditions of the bridge elements. The applicability and recommendation scale for the use of UAVs for different bridge inspections was provided. The approach demonstrated in this study is expected to result in more than 90% savings in storage requirements and contribute to an increase in the applications of UAVs for conducting 360° bridge inspections across the U.S.  more » « less
Award ID(s):
2017796
PAR ID:
10557870
Author(s) / Creator(s):
; ; ;
Publisher / Repository:
SAGE Publications
Date Published:
Journal Name:
Transportation Research Record: Journal of the Transportation Research Board
Volume:
2678
Issue:
4
ISSN:
0361-1981
Page Range / eLocation ID:
482 to 504
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; (, 2021 IEEE Aerospace Conference)
    Recent technological advances have led to an increase in the adoption of Unmanned Aerial Vehicles (UAVs) in a variety of use-case scenarios. In particular, Departments of Transportation in several states in the United States have been exploring the use of UAVs for bridge and infrastructure inspections to improve safety and reduce the costs of the inspection process. UAVs are remotely piloted from a cockpit or a ground station via radio channels. The UAV's state information and payload information are also transmitted to the cockpit/ground station via radio frequency (RF) signals. The RF channels that are commonly used by most UAVs are 72-73, 902-928 and 2400-2483.5 MHz bands, which is also shared by several other communication protocols such as, WiFi and ZigBee networks, and therefore, the interference effects with the other services on the UAV's operation performance cannot be overlooked, particularly to maintain the minimum distance from the close by surfaces while flying alongside and underneath the bridges to achieve the best results. The loss of signal or even signal strength during such close flights can cause damage to the UAV. Especially while inspecting the bridges located in the urban areas that involve a lot of RF communication around due to presence of sever RC devices providing different services. Conventional Electromagnetic Compatibility (EMC) adherence requirements imposed on electronic systems are not adequate for UAVs due to their airborne nature and the presence of the other RF sources in the environment. Thus, in this work, we investigate the compliance of EMC requirements by designing and conducting field experiments to expose the UAVs to electromagnetic interference and distortions that are likely to be encountered during the UAV operation. The results of this work will enable us to assess the level of RF immunity of the general-purpose UAVs to aid in the selection of a suitable UAV platform for bridge inspection and develop safety procedures for minimizing the impact of RF interference. 
    more » « less
  2. ; ; ; (, Materials Evaluation)
    Drones are increasingly used during routine inspections of bridges to improve data consistency, work efficiency, inspector safety, and cost effectiveness. Most drones, however, are operated manually within a visual line of sight and thus unable to inspect long-span bridges that are not completely visible to operators. In this paper, aerial nondestructive evaluation (aNDE) will be envisioned for elevated structures such as bridges, buildings, dams, nuclear power plants, and tunnels. To enable aerial nondestructive testing (aNDT), a human-robot system will be created to integrate haptic sensing and dexterous manipulation into a drone or a structural crawler in augmented/virtual reality (AR/VR) for beyond-visual-line-of-sight (BVLOS) inspection of bridges. Some of the technical challenges and potential solutions associated with aNDT&E will be presented. Example applications of the advanced technologies will be demonstrated in simulated bridge decks with stipulated conditions. The developed human-robot system can transform current on-site inspection to future tele-inspection, minimizing impact to traffic passing over the bridges. The automated tele-inspection can save as much as 75% in time and 95% in cost. 
    more » « less
  3. ; ; ; ; ; ; ; (, Sensors)
    The Federal Highway Administration (FHWA) mandates biannual bridge inspections to assess the condition of all bridges in the United States. These inspections are recorded in the National Bridge Inventory (NBI) and the respective state’s databases to manage, study, and analyze the data. As FHWA specifications become more complex, inspections require more training and field time. Recently, element-level inspections were added, assigning a condition state to each minor element in the bridge. To address this new requirement, a machine-aided bridge inspection method was developed using artificial intelligence (AI) to assist inspectors. The proposed method focuses on the condition state assessment of cracking in reinforced concrete bridge deck elements. The deep learning-based workflow integrated with image classification and semantic segmentation methods is utilized to extract information from images and evaluate the condition state of cracks according to FHWA specifications. The new workflow uses a deep neural network to extract information required by the bridge inspection manual, enabling the determination of the condition state of cracks in the deck. The results of experimentation demonstrate the effectiveness of this workflow for this application. The method also balances the costs and risks associated with increasing levels of AI involvement, enabling inspectors to better manage their resources. This AI-based method can be implemented by asset owners, such as Departments of Transportation, to better serve communities. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al (, Transportation Research Record: Journal of the Transportation Research Board)
    The purpose of a routine bridge inspection is to assess the physical and functional condition of a bridge according to a regularly scheduled interval. The Federal Highway Administration (FHWA) requires these inspections to be conducted at least every 2 years. Inspectors use simple tools and visual inspection techniques to determine the conditions of both the elements of the bridge structure and the bridge overall. While in the field, the data is collected in the form of images and notes; after the field work is complete, inspectors need to generate a report based on these data to document their findings. The report generation process includes several tasks: (1) evaluating the condition rating of each bridge element according to FHWA Recording and Coding Guide for Structure Inventory and Appraisal of the Nation’s Bridges; and (2) updating and organizing the bridge inspection images for the report. Both of tasks are time-consuming. This study focuses on assisting with the latter task by developing an artificial intelligence (AI)-based method to rapidly organize bridge inspection images and generate a report. In this paper, an image organization schema based on the FHWA Recording and Coding Guide for the Structure Inventory and Appraisal of the Nation’s Bridges and the Manual for Bridge Element Inspection is described, and several convolutional neural network-based classifiers are trained with real inspection images collected in the field. Additionally, exchangeable image file (EXIF) information is automatically extracted to organize inspection images according to their time stamp. Finally, the Automated Bridge Image Reporting Tool (ABIRT) is described as a browser-based system built on the trained classifiers. Inspectors can directly upload images to this tool and rapidly obtain organized images and associated inspection report with the support of a computer which has an internet connection. The authors provide recommendations to inspectors for gathering future images to make the best use of this tool. 
    more » « less
  5. ; ; ; ; (, Transportation Research Record: Journal of the Transportation Research Board)
    Airports facilitate the fastest mode of transportation and connect local communities and businesses with national and international destinations. The American Society of Civil Engineers (ASCE) 2021 infrastructure report card rated the aviation infrastructure category with a D+. This highlights the need for frequent monitoring and performing timely preservation techniques to ensure the optimal performance of the asset. The Texas Department of Transportation (TxDOT) periodically inspects the regional airports in Texas through visual surveys and estimates the pavement condition index (PCI) for each airport on a network scale. These ratings are used to assess the need for rehabilitation in a timely manner. In this study, an attempt was made to use an unmanned aerial vehicle (UAV) mounted with an optical camera to inspect and evaluate the condition of various airport assets. Several observations were outlined to conduct a safe inspection of airport assets using UAVs. A comparison of PCI values, grouped into three categories, obtained from traditional and aerial inspections was made to understand the feasibility of using this new technology for airport asset management. It was observed that both inspections classified most of the airport assets similarly. The traditional inspection was observed to be quicker as it requires inspection of only sampled units, however, UAV data processing takes a relatively long time to offer a comprehensive digital footprint and immersive visualization experience of the whole airport assets. Overall, UAVs are identified to have a great potential as a data collection tool supplementary to the current traditional practices. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email