We use high‐resolution earthquake locations to characterize the three‐dimensional structure of active faults in California and how it evolves with fault structural maturity. We investigate the distribution of aftershocks of several recent large earthquakes that occurred on continental strike slip faults of various structural maturity (i.e. various cumulative fault displacement, length, initiation age and slip rate). Aftershocks define a tabular zone of shear deformation surrounding the mainshock rupture plane. Comparing this to geological observations, we conclude that this results from the re‐activation of secondary faults. We observe a rapid fall off of the number of aftershocks at a distance range of 0.06‐0.22 km from the main fault surface of mature faults, and 0.6‐1.0 km from the fault surface of immature faults. The total width of the active shear deformation zone surrounding the main fault plane reaches 1.0‐2.5 km and 6‐9 km for mature and immature faults, respectively. We find that the width of the shear deformation zone decreases as a power law with cumulative fault displacement. Comparing with a dynamic rough fault model, we infer that the narrowing of the shear deformation zone agrees quantitatively with earlier estimates of the smoothing of faults with displacement, both of which are aspects of fault wear. We find that earthquake stress drop decreases with fault displacement and hence with increased smoothness and/or slip rate. This may result from fault healing or the effect of roughness on friction.
This content will become publicly available on October 1, 2025
On 5 April 2024, 10:23 a.m. local time, a moment magnitude 4.8 earthquake struck Tewksbury Township, New Jersey, about 65 km west of New York City. Millions of people from Virginia to Maine and beyond felt the ground shaking, resulting in the largest number (>180,000) of U.S. Geological Survey (USGS) “Did You Feel It?” reports of any earthquake. A team deployed by the Geotechnical Extreme Events Reconnaissance Association and the National Institute of Standards and Technology documented structural and nonstructural damage, including substantial damage to a historic masonry building in Lebanon, New Jersey. The USGS National Earthquake Information Center reported a focal depth of about 5 km, consistent with a lack of signal in Interferometric Synthetic Aperture Radar data. The focal mechanism solution is strike slip with a substantial thrust component. Neither mechanism’s nodal plane is parallel to the primary northeast trend of geologic discontinuities and mapped faults in the region, including the Ramapo fault. However, many of the relocated aftershocks, for which locations were augmented by temporary seismic deployments, form a cluster that parallels the general northeast trend of the faults. The aftershocks lie near the Tewksbury fault, north of the Ramapo fault.
more » « less- Award ID(s):
- 2147536
- PAR ID:
- 10564815
- Author(s) / Creator(s):
- ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; more »
- Publisher / Repository:
- Seismological Society of America
- Date Published:
- Journal Name:
- The Seismic Record
- Volume:
- 4
- Issue:
- 4
- ISSN:
- 2694-4006
- Page Range / eLocation ID:
- 240 to 250
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
Abstract -
Abstract We attempt to clarify processes associated with the 2019 Ridgecrest earthquake sequence by analyzing space‐time variations of seismicity, potency values, and focal mechanisms of earthquakes leading to and during the sequence. Over the 20 years before the
M w 7.1 mainshock, the percentage of normal faulting events decreased gradually from 25% to below 10%, indicating a long‐term increase of shear stress. TheM w 6.4 andM w 7.1 ruptures terminated at areas with strong changes of seismic velocity or intersections with other faults producing arresting barriers. The aftershocks are characterized by highly diverse focal mechanisms and produced volumetric brittle deformation concentrated in a 5–10 km wide zone around the main ruptures. Early aftershocks of theM w 7.1 event extended over a wide area below typical seismogenic depth, consistent with a transient deepening of the brittle‐ductile transition. The Ridgecrest earthquake sequence produced considerable rock damage in the surrounding crust including below the nominal seismogenic zone. -
SUMMARY The Brawley Seismic Zone (BSZ) is a ∼58-km-long section of the Pacific–North America Plate boundary that connects the southernmost San Andreas Fault (SAF) and the Imperial Fault in southern California. We analyse the BSZ as two segments: a north segment, dominated by SAF tectonics, and a south segment that accommodates a higher level of seismicity. The south segment includes a ∼6 km wide right lateral step-over that includes the Salton Sea geothermal field (SSGF) and Holocene subaerial lava domes at the south end of the Salton Sea, called Salton Buttes. In general, the 40 yr (1981–2021) of BSZ seismicity is characterized by transitory sequences that often are accommodated simultaneously or in quick succession on intricate ladder-like faults. These sequences rarely reactivate faults associated with previous seismicity alignments but rather activate adjacent faults, sometimes located within less than 1 km. They can include several events of similar size as the mainshock, followed by bursts of aftershocks sometimes located away from the mainshock rupture. The seismicity rate and the spatial geometrical complexity varies between the BSZ-north and BSZ-south segments. The 24-km-long BSZ-north accommodates a ∼12-km-long linear trend of seismicity that extends from the SAF terminus into the Salton Sea, where moderate-sized northeast striking sequences form the rungs in a ladder-structure in a weak crust. The seismicity in this area is most likely influenced by the stress state of the SAF. In contrast, the 34 km long BSZ-south segment, which also has a weak crust, has accommodated larger sequences that illuminate irregular ladder-type faulting, with aftershocks defining linear distributions striking either north or northeast. The focal mechanisms exhibit a mostly strike-slip style of faulting with minor dip-slip faulting in the south Salton Sea area as well as the Mesquite basin to the south. The state of stress, as determined from focal mechanisms, consists of almost horizontal σ1, and σ3 with vertical σ2. The activation angle between the trend of σ1 and the preferred nodal plane of the largest nearby event decreases systematically from north to south along the long-axis of the BSZ. In the step-over zone, the Holocene volcanism and the frequent seismicity sequences suggest crustal extension as well as associated reduced crustal strength as compared to other parts of the BSZ. The presence of weak, thin, hot crust and distributed ladder-like or conjugate predominantly strike-slip faulting suggests that the whole BSZ acts as a several kilometre wide fault zone where no prominent principal slip surfaces are required to accommodate moderate-sized (M6+) earthquakes.
-
Abstract We first explore a series of retrospective earthquake interactions in southern California. We find that the four Mw≥7 shocks in the past 150 yr brought the Ridgecrest fault ∼1 bar closer to failure. Examining the 34 hr time span between the Mw 6.4 and Mw 7.1 events, we calculate that the Mw 6.4 event brought the hypocentral region of the Mw 7.1 earthquake 0.7 bars closer to failure, with the Mw 7.1 event relieving most of the surrounding stress that was imparted by the first. We also find that the Mw 6.4 cross-fault aftershocks shut down when they fell under the stress shadow of the Mw 7.1. Together, the Ridgecrest mainshocks brought a 120 km long portion of the Garlock fault from 0.2 to 10 bars closer to failure. These results motivate our introduction of forecasts of future seismicity. Most attempts to forecast aftershocks use statistical decay models or Coulomb stress transfer. Statistical approaches require simplifying assumptions about the spatial distribution of aftershocks and their decay; Coulomb models make simplifying assumptions about the geometry of the surrounding faults, which we seek here to remove. We perform a rate–state implementation of the Coulomb stress change on focal mechanisms to capture fault complexity. After tuning the model through a learning period to improve its forecast ability, we make retrospective forecasts to assess model’s predictive ability. Our forecast for the next 12 months yields a 2.3% chance of an Mw≥7.5 Garlock fault rupture. If such a rupture occurred and reached within 45 km of the San Andreas, we calculate it would raise the probability of a San Andreas rupture on the Mojave section by a factor of 150. We therefore estimate the net chance of large San Andreas earthquake in the next 12 months to be 1.15%, or about three to five times its background probability.more » « less
-
Abstract We probe the interaction of large earthquakes on the East Anatolian fault zone, site of four Mw ≥ 6.8 events since 2020. We find that the 2023 Mw 7.8 Pazarcık shock promoted the Mw 7.7 Elbistan earthquake 9 hr later, largely through unclamping of the epicentral patch of the future rupture. Epicentral unclamping is also documented in the 1987 Superstition Hills, 1997 Kagoshima, and 2019 Ridgecrest sequences, so this may be common. The Mw 7.7 Elbistan earthquake, in turn, is calculated to have reduced the shear stress on the central Pazarcık rupture, producing a decrease in the aftershock rate along that section of the rupture. Nevertheless, the Mw 7.7 event ruptured through a Çardak fault section on which the shear stress was decreased by the Mw 7.8 rupture, and so rupture propagation was not halted by the static stress decrease. The 2020 Mw 6.8 Doğanyol–Sivrice earthquake, located beyond the northeast tip of the Mw 7.8 Pazarcık rupture, locally dropped the stress by ∼10 bars. The 2023 Mw 7.8 earthquake then increased the stress there by 1–2 bar, leaving a net stress drop, resulting in a hole in the 2023 Pazarcık aftershocks. We find that many lobes of calculated stress increase caused by the 2020–2023 Mw 6.8–7.8 earthquakes are sites of aftershocks, and we calculate 5–10 faults in several locations off the ruptures brought closer to failure. The earthquakes also cast broad stress shadows in which most faults were brought farther from failure, and we observe the beginnings of seismicity rate decreases in some of the deepest stress shadows. Some 41 Mw ≥ 5 aftershocks have struck since the Mw 7.8 mainshock. But based on these Coulomb interactions and on the rapid Kahramanmaraş aftershock decay, we forecast only about 1–3 Mw ≥ 5 earthquakes during the 12–month period beginning 1 December 2023, which is fortunately quite low.