An official website of the United States government
Introductory steel design courses focus on the analysis and design of primary members, which typically include tension members and connections, compression members, flexural members, and beam-columns. Introducing structural steel design concepts to students presents its fair share of challenges. First, it is difficult for students to visualize and accurately predict the potential failure modes of a tension member: yielding of the gross section, rupture of the net section, and block shear. Second, it is also difficult for students to visualize the buckling modes of steel columns, which vary with shape and type of bracing. Students particularly struggle with the determination of buckling modes between strong and weak axes based on effective lengths. Third, flexural failure modes of steel beams are very difficult for students to visualize and understand when each mode controls. The failure modes are complex and fall into three categories for compact shapes: yielding of the cross section, inelastic lateral torsional buckling, and elastic lateral torsional buckling, which is dependent on the unbraced length of the compression flange. Non-compact sections also include local buckling of the flange or web, but identifying the relationship between the unbraced length and beam span and how the unbraced length affects the flexural capacity tends to be the most difficult concept for students to grasp. This paper provides a detailed overview of the design, fabrication, and implementation of three large-scale experiential learning modules for an undergraduate steel design course. The first module focuses on the tension connections by providing physical models of various failure types including yielding of the gross section, rupture of the net section, and block shear; the second module focuses on the capacity of columns with different amounts of lateral bracing about the weak axis; and the third module focuses on the flexural strength of a beam with different unbraced lengths to illustrate the difference between lateral torsional buckling and flange local buckling/yielding of the gross section. The three modules were used throughout the steel design course at Saint Louis University and Rose-Hulman Institute of Technology to illustrate the failure mechanisms associated with the design of steel structures.
more »
« less
A Novel Fiber Element to Simulate Interactive Local and Lateral Torsional Buckling in Steel Moment Frames
attributed to loss of load carrying capacity of the individual members. Dominant failure modes in structural steel members include interactions between inelastic lateral torsional buckling, global buckling, and local buckling (referred to as Interactive Buckling). Accurate performance assessment of steel moment frames highly relies on the accuracy of the model-based simulations of such limit states. Commonly used concentrated hinge and fiber-based models fail to address the physics of this response leading to inaccurate performance assessment of structures. A nonlinear displacement-based fiber element [named Torsional Fiber Element (TFE)] to simulate monotonic and cyclic interactive buckling in steel members is proposed and implemented on OpenSees (an open-source finite element software). The element includes St. Venant as well as warping torsion response that are essential for lateral torsional buckling response in a wide-flange I-section, through enriched displacement fields and strain interpolation. Response of local buckling is represented in a quantitative manner using a novel multi-axial constitutive relationship with calibration of an effective softening behavior in the post-buckling response. Mesh dependency issue related to the softening material model is also discussed and addressed through a proposed non-local strain measure. The efficacy of the model is assessed through several continuum finite element simulations and experimental data.
more »
« less
- Award ID(s):
- 1926202
- PAR ID:
- 10568550
- Publisher / Repository:
- Structural Stability Research Council
- Date Published:
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This study develops two (2) simple but effective techniques for enhancing buckling resistance of welded steel moment connections (WSMCs). The ANSI/AISC 358-10 prequalified connections satisfy the 4% interstory drift requirement, however experimental studies have shown that their strength degradation may initiate as early as 3% drift. This strength degradation has been observed to be initiated by buckling of the beam web which is followed by buckling of the beamflange and twisting of the beam. Consequently, buildings with the prequalified connections may sustain significant buckling damages under severe earthquakes and it is questionable as to whether these connections are capable of resisting gravity loads or lateral loads from strong aftershocks following a severe earthquake. To improve upon these shortcomings, two (2) performance enhancing techniques are proposed and investigated through finite element analysis (FEA). The more promising of the two involves reinforcing the beam web in the expected plastic hinge with a web reinforcement plate. Finite element analysis demonstrated that this reinforcement enhances the beam buckling resistance of WSMCs and thereby significantly reduces the beam buckling damages even at 5% interstory drift. The potential of this technique is analytically and experimentally demonstrated for the recently developed heat-treated beam section (HBS) WSMC. Test results confirm that the web reinforcement plate was effective in reducing local buckling damage and associated strength degradation, thereby improving the performance of HBS WSMCs. Areas for application and future development of the proposed techniques are identified.more » « less
-
Risk assessment of power transmission systems against strong winds requires models that can accurately represent the realistic performance of the physical infrastructure. Capturing material nonlinearity, p-delta effects in towers, buckling of lattice elements, joint slippage, and joint failure requires nonlinear models. For this purpose, this study investigates the reliability of transmission line systems by utilizing a nonlinear model of steel lattice towers, generated in OpenSEES platform. This model is capable of considering various geometric and material nonlinearities mentioned earlier. In order to efficiently estimate the probability of failure of transmission lines, the current study adopts an advanced reliability method through Error rate-based Adaptive Kriging (REAK) proposed by the authors. This method is capable of significantly reducing the number of simulations compared to conventional Monte Carlo methods such that reliability analysis can be done within a reasonable time. Results indicate that REAK efficiently estimates the reliability of transmission lines with a maximum of 150 Finite Element simulations for various wind intensities.more » « less
-
The occurrence of local buckling, an external anomaly in pipelines, significantly contributes to pipeline incidents, posing challenges in monitoring such localized anomalies, particularly during pipeline operations. This paper introduces an approach aimed at monitoring local buckling occurring in the compression bending area of pipeline sections. The proposed approach utilizes fiber Bragg gratings (FBGs) to facilitate real-time measurement of strain changes. Experimental tests were conducted on the steel pipe equipped with FBGs positioned near the top and bottom of the pipe, subjected to four-point loading test to generate bending and local buckling. The strain data obtained from FBGs enable effective detection and localization of bending and buckling deformations during the loading process. This research contributes to enhancing the capability to monitor external threats to pipelines, thereby fostering improved condition assessments and bolstering infrastructure resilience.more » « less
-
This study develops and experimentally validates an innovative technique for enhancing the seismic performance of steel beam to column moment connections. The technique involves reducing the strength of specified regions of the beam flanges by exposing them to high temperatures followed by slow cooling. Analogous to the reduced beam section (RBS) connection, yielding and plastic hinge formation is promoted in the heat-treated beam section (HBS). Moreover, because the elastic and inelastic modulus of the steel is unmodified by the heat-treatment and the beam cross section is not altered, an HBS connection does not sacrifice elastic stiffness or buckling resistance as does the RBS. Design of the HBS connection was performed through detailed finite element analysis and material testing. Two large scale connections modified with the HBS technique were tested in this study. The test program showed that the proposed heat-treatment technique was successful in the promotion of yielding and plastic hinge development in the heat-treated regions with specimens attaining interstory drifts as high as 6% without weld or near weld fracture. Strength degradation due to beam buckling within the HBS was the observed failure mechanism in both specimens. Detail analyses of strain and beam deformation data are presented to explain the HBS connection plastic hinge formation and gradual strength degradation. Broader applications of the technique to other structural components are identified.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Proceeding:
- The DOI is not currently available.
