skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Reducing the risk of cascading failure in active distribution networks using adaptive critic design
In this study, a technique for developing a distribution management system (DMS), which possesses the flexibility to take both preventive and corrective actions against thermal overloading of branches in active distribution networks (ADNs), has been demonstrated. An ADN comprises microgrids that consist of photovoltaic and battery energy storage systems (BESSs). The DMS primarily minimizes the hourly cumulative cost incurred by loads due to energy pricing of utility, by effectively dispatching the BESSs. Besides, the DMS regulates BESS state of charge and bus voltages within their limits. It also controls loading of branches by taking corrective measures during overloading or preventive measures during critical loading conditions. This DMS has been designed using a reinforcement learning based technique, namely, adaptive critic design (ACD). This study elaborates the formulation of ACD algorithm so that an effective performance of the controller can be achieved. As case study, a modified IEEE 5‐bus system along with a microgrid and its controllers have been modelled in detail and simulated in real‐time by developing a simulation‐in‐the‐loop testbed using OPAL‐RT and DSpace. This testbed facilitates simulation of the detailed model along with its power electronic components, such that both transient and steady‐state performance of the system can be observed.  more » « less
Award ID(s):
1846940
PAR ID:
10570680
Author(s) / Creator(s):
 ;  
Publisher / Repository:
DOI PREFIX: 10.1049
Date Published:
Journal Name:
IET Generation, Transmission & Distribution
Volume:
14
Issue:
13
ISSN:
1751-8687
Format(s):
Medium: X Size: p. 2592-2601
Size(s):
p. 2592-2601
Sponsoring Org:
National Science Foundation
More Like this
  1. (, Journal of energy storage)
    Uwe Sauer, Dirk (Ed.)
    A B S T R A C T The probabilistic and intermittent output power of Wind Turbines (WT) is one major inconsistency of these Renewable Energy Sources (RES). Battery Energy Storage Systems (BESS) are a suitable solution to mitigate this intermittency by smoothening WT’s output power. Although the main benefit of BESSs mentions as peak shaving and load-shifting, but in this research, it will verify that optimal placement and sizing them jointly with WTs can lead to more benefits like compensating the required system’s reactive power support from WTs. The reactive power size of WTs and BESSs will be derived from the result of the joint sizing and placement in this study, as well as their active power output to meet the load demand. This can facilitate WTs and BESSs contribution to cover the system’s required reactive power and their participation in the reactive power market and ancillary services. This paper also proposes new cost functions for both WTs and BESSs and minimizes their cost while ensuring minimal total loss (active and reactive) in the power distribution system. This can benefit both WTs’ and BESSs’ owners as well as system operators. Suitable placement and sizing of the WTs and BESSs can also improve the load bus voltage profiles, which can benefit the end-users, and will verify using the proposed optimization by different case studies on the 33 bus distribution system. The results of case studies ascertain the consistency of the proposed formulation for placement and sizing BESSs and WTs jointly, as well as other benefits to the power system, the power plant owners, and system operators. 
    more » « less
  2. ; ; (, Energies)
    null (Ed.)
    Contingency Constrained Optimal Power Flow (CCOPF) differs from traditional Optimal Power Flow (OPF) because its generation dispatch is planned to work with state variables between constraint limits, considering a specific contingency. When it is not desired to have changes in the power dispatch after the contingency occurs, the CCOPF is studied with a preventive perspective, whereas when the contingency occurs and the power dispatch needs to change to operate the system between limits in the post-contingency state, the problem is studied with a corrective perspective. As current power system software tools mainly focus on the traditional OPF problem, having the means to solve CCOPF will benefit power systems planning and operation. This paper presents a Quadratically Constrained Quadratic Programming (QCQP) formulation built within the matpower environment as a solution strategy to the preventive CCOPF. Moreover, an extended OPF model that forces the network to meet all constraints under contingency is proposed as a strategy to find the power dispatch solution for the corrective CCOPF. Validation is made on the IEEE 14-bus test system including photovoltaic generation in one simulation case. It was found that in the QCQP formulation, the power dispatch calculated barely differs in both pre- and post-contingency scenarios while in the OPF extended power network, node voltage values in both pre- and post-contingency scenarios are equal in spite of having different power dispatch for each scenario. This suggests that both the QCQP and the extended OPF formulations proposed, could be implemented in power system software tools in order to solve CCOPF problems from a preventive or corrective perspective. 
    more » « less
  3. ; (, Applied Sciences)
    High impedance faults present unique challenges for power system protection engineers. The first challenge is the detection of the fault, given the low current magnitudes. The second challenge is to locate the fault to allow corrective measures to be taken. Corrective actions are essential as they mitigate safety hazards and equipment damage. The problem of high impedance fault detection and location is not a new one, and despite the safety and reliability implications, relatively few efforts have been made to find a general solution. This work presents a hybrid data driven and analytical-based model for high impedance fault detection in distribution systems. The first step is to estimate a state space model of the power line being monitored. From the state space model, eigenvalues are calculated, and their dynamic behavior is used to develop zones of protection. These zones of protection are generated analytically using machine learning tools. High impedance faults are detected as they drive the eigenvalues outside of their zones. A metric called eigenvalue drift coefficient was formulated in this work to facilitate the generalization of this solution. The performance of this technique is evaluated through case studies based on the IEEE 5-Bus system modeled in Matlab. Test results are encouraging indicating potential for real-life applications. 
    more » « less
  4. ; (, Risk Analysis)
    Large‐area, long‐duration power outages are increasingly common in the United States, and cost the economy billions of dollars each year. Building a strategy to enhance grid resilience requires an understanding of the optimal mix of preventive and corrective actions, the inefficiencies that arise when self‐interested parties make resilience investment decisions, and the conditions under which regulators may facilitate the realization of efficient market outcomes. We develop a bi‐level model to examine the mix of preventive and corrective measures that enhances grid resilience to a severe storm. The model represents a Stackelberg game between a regulated utility (leader) that may harden distribution feeders before a long‐duration outage and/or deploy restoration crews after the disruption, and utility customers with varying preferences for reliable power (followers) who may invest in backup generators. We show that the regulator's denial of cost recovery for the utility's preventive expenditures, coupled with the misalignment between private objectives and social welfare maximization, yields significant inefficiencies in the resilience investment mix. Allowing cost recovery for a higher share of the utility's capital expenditures in preventive measures, extending the time horizon associated with damage cost recovery, and adopting a storm restoration compensation mechanism shift the realized market outcome toward the efficient solution. If about one‐fifth of preventive resilience investments is approved by regulators, requiring utilities to pay a compensation of $365 per customer for a 3‐day outage (about seven times the level of compensation currently offered by US utilities) provides significant incentives toward more efficient preventive resilience investments. 
    more » « less
  5. ; ; ; ; (, 2019 7th Workshop on Modeling and Simulation of Cyber-Physical Energy Systems (MSCPES))
    Transactive energy systems (TES) are emerging as a transformative solution for the problems that distribution system operators face due to an increase in the use of distributed energy resources and rapid growth in scalability of managing active distribution system (ADS). On the one hand, these changes pose a decentralized power system control problem, requiring strategic control to maintain reliability and resiliency for the community and for the utility. On the other hand, they require robust financial markets while allowing participation from diverse prosumers. To support the computing and flexibility requirements of TES while preserving privacy and security, distributed software platforms are required. In this paper, we enable the study and analysis of security concerns by developing Transactive Energy Security Simulation Testbed (TESST), a TES testbed for simulating various cyber attacks. In this work, the testbed is used for TES simulation with centralized clearing market, highlighting weaknesses in a centralized system. Additionally, we present a blockchain enabled decentralized market solution supported by distributed computing for TES, which on one hand can alleviate some of the problems that we identify, but on the other hand, may introduce newer issues. Future study of these differing paradigms is necessary and will continue as we develop our security simulation testbed. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email