An official website of the United States government
Abstract. Volatility and viscosity are important properties of organic aerosols (OA),affecting aerosol processes such as formation, evolution, and partitioning ofOA. Volatility distributions of ambient OA particles have often beenmeasured, while viscosity measurements are scarce. We have previouslydeveloped a method to estimate the glass transition temperature (Tg) ofan organic compound containing carbon, hydrogen, and oxygen. Based onanalysis of over 2400 organic compounds including oxygenated organiccompounds, as well as nitrogen- and sulfur-containing organic compounds, weextend this method to include nitrogen- and sulfur-containing compoundsbased on elemental composition. In addition, parameterizations are developedto predict Tg as a function of volatility and the atomicoxygen-to-carbon ratio based on a negative correlation between Tg andvolatility. This prediction method of Tg is applied to ambientobservations of volatility distributions at 11 field sites. Thepredicted Tg values of OA under dry conditions vary mainly from 290 to 339 Kand the predicted viscosities are consistent with the results of ambientparticle-phase-state measurements in the southeastern US and the Amazonianrain forest. Reducing the uncertainties in measured volatility distributionswould improve predictions of viscosity, especially at low relative humidity.We also predict the Tg of OA components identified via positive matrixfactorization of aerosol mass spectrometer (AMS) data. The predicted viscosity ofoxidized OA is consistent with previously reported viscosity of secondary organic aerosols (SOA) derivedfrom α-pinene, toluene, isoprene epoxydiol (IEPOX), and diesel fuel.Comparison of the predicted viscosity based on the observed volatilitydistributions with the viscosity simulated by a chemical transport modelimplies that missing low volatility compounds in a global model can lead tounderestimation of OA viscosity at some sites. The relation betweenvolatility and viscosity can be applied in the molecular corridor orvolatility basis set approaches to improve OA simulations in chemicaltransport models by consideration of effects of particle viscosity in OAformation and evolution.
more »
« less
Phase state and viscosity of secondary organic aerosols over China simulated by WRF-Chem
Abstract. Secondary organic aerosols (SOA) can exist in liquid, semi-solid or amorphous solid states, which are rarely accounted for in current chemical transport models (CTMs). Missing the information of SOA phase state and viscosity in CTMs impedes accurate representation of SOA formation and evolution, affecting the predictions of aerosol effects on air quality and climate. We have previously developed a method to estimate the glass transition temperature (Tg) of an organic compound based on volatility. In this study, we apply this method to predict the phase state and viscosity of SOA particles over China in summer of 2018 using the Weather Research and Forecasting model coupled to Chemistry (WRF-Chem). This is the first time that spatial distributions of the SOA phase state over China are investigated by a regional CTM. Simulations show that Tg values of dry SOA range from ~287 K to 305 K, with higher values in the northwestern China where SOA particles have larger mass fractions of low volatility compounds. Considering water uptake by SOA particles, the SOA viscosity also shows a prominent geospatial gradient that highly viscous or solid SOA particles are mainly found in the northwestern China. The lowest and highest SOA viscosity values both occur over the Qinghai-Tibet Plateau that the solid phase state is predicted over dry and high-altitude areas and the liquid phase state is predicted mainly in the south of the plateau with high relative humidity during the summer monsoon season. The characteristic mixing timescale of organic molecules in 200 nm SOA particles is calculated based on the simulated particle viscosity and the bulk diffusion coefficient of organic molecules. Calculations show that during the simulated period the percent time of the mixing timescale longer than 1 h is > 70 % at the surface and at 500 hPa in most areas of the northern China, indicating that kinetic partitioning considering the bulk diffusion in viscous particles may be required for more accurate prediction of SOA mass concentrations and size distributions over these areas. Sensitivity simulations show that including the formation of extremely low-volatile organic compounds, the percent time that a SOA particle is in the liquid phase state decreases by up to 12 % in the southeastern China during the simulated period. With an assumption that the organic and inorganic compounds are always internally mixed in one phase, we show that the water absorbed by inorganic species can significantly lower the simulated viscosity over the southeastern China. This indicates that constraining the uncertainties in simulated SOA volatility distributions and accurately predicting the occurrence of phase separation would improve prediction of viscosity in multicomponent particles in southeastern China.
more »
« less
- Award ID(s):
- 2246502
- PAR ID:
- 10576329
- Publisher / Repository:
- EGU
- Date Published:
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The ability of an atmospheric aerosol to take up water or to participate in heterogeneous reactions is highly influenced by its phase state – solid, semi-solid, or liquid. These changes in phase state can be predicted by glass transition temperature (Tg), as particles at temperatures below their Tg will show solid properties, while increasing the temperature above their Tg will allow for semi-solid and eventually liquid properties. Historically, measurements of the Tg of bulk materials have been studied in order to model the phase states of aerosols in the atmosphere; however, these methods only permit an estimation of aerosol Tg based on their bulk chemical composition. Determining the Tg of individual particles will allow for more accurate model predictions of aerosol phase state. Herein, we apply a recently developed method utilizing a nano-thermal analysis (nanoTA) module coupled to an atomic force microscope (AFM), to determine the Tg of individual secondary organic aerosol (SOA) particles generated from the reactive uptake of isoprene epoxydiol (IEPOX) onto acidic ammonium sulfate aerosol particles. NanoTA works by using a specialized AFM probe which can be heated while in contact with a particle of interest. As the temperature increases, the probe deflection will first increase due to thermal expansion of the particle followed by a decrease at its melting temperature (Tm). The Tg of the particle can then be determined from Tm using the Boyer–Beaman rule. We compared the Tg of IEPOX-derived SOA particles generated at relative humidity (RH) of 30, 65, and 80%, and found that increasing RH from 30 to 80% led to a decrease in average Tg of 22 K, indicating less viscous particles at higher RH conditions. Our measurements with this technique will allow for more accurate representations of the phase state of aerosols in the atmosphere.more » « less
-
The ability of an atmospheric aerosol to take up water or to participate in heterogeneous reactions is highly influenced by its phase state – solid, semi-solid, or liquid. These changes in phase state can be predicted by glass transition temperature (Tg), as particles at temperatures below their Tg will show solid properties, while increasing the temperature above their Tg will allow for semi-solid and eventually liquid properties. Historically, measurements of the Tg of bulk materials have been studied in order to model the phase states of aerosols in the atmosphere; however, these methods only permit an estimation of aerosol Tg based on their bulk chemical composition. Determining the Tg of individual particles will allow for more accurate model predictions of aerosol phase state. Herein, we apply a recently developed method utilizing a nano-thermal analysis (nanoTA) module coupled to an atomic force microscope (AFM), to determine the Tg of individual secondary organic aerosol (SOA) particles generated from the reactive uptake of isoprene epoxydiol (IEPOX) onto acidic ammonium sulfate aerosol particles. NanoTA works by using a specialized AFM probe which can be heated while in contact with a particle of interest. As the temperature increases, the probe deflection will first increase due to thermal expansion of the particle followed by a decrease at its melting temperature (Tm). The Tg of the particle can then be determined from Tm using the Boyer–Beaman rule. We compared the Tg of IEPOX-derived SOA particles generated at relative humidity (RH) of 30, 65, and 80%, and found that increasing RH from 30 to 80% led to a decrease in average Tg of 22 K, indicating less viscous particles at higher RH conditions. Our measurements with this technique will allow for more accurate representations of the phase state of aerosols in the atmosphere.more » « less
-
null (Ed.)Abstract. Mass accommodation is an essential process for gas–particle partitioning oforganic compounds in secondary organic aerosols (SOA). The massaccommodation coefficient is commonly described as the probability of a gasmolecule colliding with the surface to enter the particle phase. It is oftenapplied, however, without specifying if and how deep a molecule has topenetrate beneath the surface to be regarded as being incorporated into thecondensed phase (adsorption vs. absorption). While this aspect is usuallynot critical for liquid particles with rapid surface–bulk exchange, it canbe important for viscous semi-solid or glassy solid particles to distinguishand resolve the kinetics of accommodation at the surface, transfer acrossthe gas–particle interface, and further transport into the particle bulk. For this purpose, we introduce a novel parameter: an effective massaccommodation coefficient αeff that depends on penetrationdepth and is a function of surface accommodation coefficient, volatility,bulk diffusivity, and particle-phase reaction rate coefficient. Applicationof αeff in the traditional Fuchs–Sutugin approximation ofmass-transport kinetics at the gas–particle interface yields SOApartitioning results that are consistent with a detailed kinetic multilayermodel (kinetic multilayer model of gas–particle interactions in aerosols and clouds, KM-GAP; Shiraiwa et al., 2012) and two-film model solutions (Modelfor Simulating Aerosol Interactions and Chemistry, MOSAIC;Zaveri et al., 2014) but deviate substantially from earlier modelingapproaches not considering the influence of penetration depth and relatedparameters. For highly viscous or semi-solid particles, we show that the effective massaccommodation coefficient remains similar to the surface accommodationcoefficient in the case of low-volatility compounds, whereas it can decrease byseveral orders of magnitude in the case of semi-volatile compounds. Such effectscan explain apparent inconsistencies between earlier studies deriving massaccommodation coefficients from experimental data or from molecular dynamicssimulations. Our findings challenge the approach of traditional SOA models using theFuchs–Sutugin approximation of mass transfer kinetics with a fixed massaccommodation coefficient, regardless of particle phase state and penetrationdepth. The effective mass accommodation coefficient introduced in this studyprovides an efficient new way of accounting for the influence of volatility,diffusivity, and particle-phase reactions on SOA partitioning in processmodels as well as in regional and global air quality models. While kineticlimitations may not be critical for partitioning into liquid SOA particlesin the planetary boundary layer (PBL), the effects are likely important foramorphous semi-solid or glassy SOA in the free and upper troposphere (FT–UT)as well as in the PBL at low relative humidity and low temperature.more » « less
-
Abstract Number: 381 Working Group: Instrumentation and Methods Abstract The phase state of atmospheric aerosol particles – solid, semi-solid, or liquid – influences their ability to take up water and participate in heterogeneous chemical reactions. Changes in phase state have been predicted by glass transition temperature (Tg) and viscosity; however, direct measurements of these properties is challenging for sub-micron particles. Historically, bulk measurements have been used, but this does not account for particle-to-particle variation or the impacts of particle size. Melting temperature (Tm) is the most significant predictor of Tg, and the two properties can be related through the Boyer-Beaman rule. Herein, we apply a recently developed method utilizing a nano-thermal analysis (nanoTA) module coupled to an atomic force microscope (AFM), to determine the Tm of individual secondary organic aerosol (SOA) particles generated from the reactive uptake of isoprene-derived epoxydiols (IEPOX) onto acidic ammonium sulfate aerosol particles. NanoTA works by using a specialized AFM probe which can be heated while in contact with a particle of interest. As the temperature increases, the probe deflection will first increase due to thermal expansion of the particle followed by a decrease at its Tm. The direct measurements are compared with model predictions based on molecular composition from hydrophilic interaction liquid chromatography coupled to electrospray ionization high-resolution quadrupole time-of-flight mass spectrometry (HILIC/ESI-HR-QTOF-MS) analysis. We compared the Tm of the SOA particles formed from IEPOX uptake onto acidic ammonium sulfate particles created at 30, 65, and 80% relative humidity (RH), and found that increasing RH from 30 to 80% led to an overall decrease in average Tm, indicating less viscous particles at higher RH conditions. Our measurements with this technique will allow for more accurate representations of the phase state of aerosols in the atmosphere.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Posted Content:
- https://doi.org/10.5194/egusphere-2023-1444
