An official website of the United States government
Abstract The field of soft actuation methods in robotics is rapidly advancing and holds promise for physical interactions between humans and robots due to the adaptability of materials and compliant structures. Among these methods, thermally-responsive soft actuators are particularly unique, ensuring portability as they do not require stationary pumps, or high voltage sources, or remote magnetic field. However, since working principles of these actuators are based on Joule heating, the systems are inefficient and dramatically slow, especially due to their passive cooling process. This paper proposes using the Peltier effect as a reversible heating/cooling mechanism for thermo-active soft actuators to enable faster deformations, more efficient heat transfer, and active cooling. The proposed actuator is composed of a thin elastic membrane filled with phase-change fluid that can vaporize when heated to produce large deformations. This membrane is placed in a braided mesh to create a McKibben muscle that can lift 5 N after 60 s of heating, and is further formed into a gripper capable of manipulating objects within the environment. The effectiveness of the proposed actuator is demonstrated, and its potential applications in various fields are discussed.
more »
« less
This content will become publicly available on December 1, 2025
Comparative Analysis of Peltier Devices and Flexible Heater Strips for Enhancing Bandwidth in Thermo-Active Soft Actuators
Soft actuators are a new generation of robotic actuators designed for safer and more adaptable physical human-robot interaction, that can be triggered by various stimulating mechanisms, including pneumatic, electric, electromagnetic, light, magnetic, and thermal sources. Among the different types of soft actuators, thermoresponsive ones that utilize heat as the stimulus show great potential due to their ability to deliver a relatively high force-to-size ratio without the need for external air pumps, tethers, high voltage sources, or complex designs. However, a major drawback of such actuators is their limited bandwidth. Traditional methods rely on Joule heating for actuation, with the actuator deflating when the heat source is turned off and ambient temperature takes over. Recently, the Peltier mechanism has been introduced as an alternative approach for active heating and cooling. This research paper presents a comparative analysis of the Peltier and flexible heater mechanisms in terms of the bandwidth and energy consumption of phase-change thermo-active soft actuators. The study aims to assess the potential of Peltier-based actuation in addressing the bandwidth limitations observed in traditional soft actuators. The findings reveal that Peltier-based actuation can significantly improve actuation speed in thermoresponsive soft actuators. However, it is important to note that the performance of Peltier-based actuators decreases after a few cycles unless additional measures, such as the use of an external fan, are implemented. This increase in performance comes at the cost of higher energy consumption, which should be carefully considered in practical applications.
more »
« less
- Award ID(s):
- 2213263
- PAR ID:
- 10578312
- Publisher / Repository:
- World Scientific
- Date Published:
- Journal Name:
- Journal of Medical Robotics Research
- Volume:
- 09
- Issue:
- 03n04
- ISSN:
- 2424-905X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Liquid crystal elastomers (LCEs) have attracted tremendous interest as actuators for soft robotics due to their mechanical and shape memory properties. However, LCE actuators typically respond to thermal stimulation through active Joule heating and passive cooling, which make them difficult to control. In this work, LCEs are combined with soft, stretchable thermoelectrics to create transducers capable of electrically controlled actuation, active cooling, and thermal‐to‐electrical energy conversion. The thermoelectric layers are composed of semiconductors embedded within a 3D printed elastomer matrix and wired together with eutectic gallium–indium (EGaIn) liquid metal interconnects. This layer is covered on both sides with LCE, which alternately heats and cools to achieve cyclical bending actuation in response to voltage‐controlled Peltier activation. Moreover, the thermoelectric layer can harvest energy from thermal gradients between the two LCE layers through the Seebeck effect, allowing for regenerative energy harvesting. As demonstrations, first, closed‐loop control of the transducer is performed to rapidly track a changing actuator position. Second, a soft robotic walker that is capable of walking toward a heat source and harvesting energy is introduced. Lastly, phototropic‐inspired autonomous deflection of the limbs toward a heat source is shown, demonstrating an additional method to increase energy recuperation efficiency for soft systems.more » « less
-
Handheld haptic devices are often limited in rendering capability, as compared to traditional grounded devices. Strenuous design criteria on weight, size, power consumption, and the ungrounded nature of handheld devices, can drive designers to prioritize actuator force or torque production over other components of dynamic range like bandwidth, transparency, and the range of stable impedances. Hybrid actuation, the use of passive and active actuators together, has the potential to increase the dynamic range of handheld haptic devices due to the large passive torque capability, the stabilizing effects of passive actuators, the high bandwidth of conventional DC servomotors, and the synergy between actuators. However, to date the use of hybrid actuation has been limited due to the highly nonlinear torque characteristics of available passive actuators that result in poor rendering accuracy. This paper describes a hybrid actuation approach and novel control topology which aims to solve actuation challenges associated with nonlinear passive actuators in hybrid and handheld haptic devices. The performance of the device is assessed experimentally, and the approach is compared to existing handheld devices.more » « less
-
In the world of soft-robotic medical devices, there is a growing need for low profile, non-rigid, and lower power actuators for soft exoskeletons and dynamic compression garments. Advanced compression garments with integrated shape memory materials have been developed recently to alleviate the functional and usability limitations associated with traditional compression garments. These advanced garments use contractile shape memory alloy (SMA) coil actuators to produce dynamic compression on the body through selective heating of the SMA material. While these garments can create spatially- and temporally-controllable compression, typical SMA materials (e.g., 70°C Flexinol) consume considerable power and require considerable thermal insulation to protect the wearer during the heating phase of the SMA actuation. Alternative SMA materials (e.g., NiTi #8 by Fort Wayne Metals, Inc.) transform below room temperature and do so using no applied electrical power and generate no waste heat. However, these materials are challenging to dynamically control and require active refrigeration to reset to material. In theory, low-temperature SMA actuators made from materials like NiTi #8 may maintain additional dynamic actuation capacity once equilibrated to room temperature (i.e., the material may not fully transform), as the SMA phase transformation temperature window expands when the material experiences applied stress. This paper investigates this possibility: we manufactured and tested low-temperature NiTi coil actuators to determine the magnitude of the additional force that can be generated via Joule heating once the material has equilibrated to room temperature. SMA spring actuators made from NiTi #8 consumed 84% less power and stabilized at significantly lower temperatures (26.0°C vs. 41.2°C) than SMA springs made from 70°C Flexinol, when actuated at identically fixed displacements (100% nominal strain) and when driven to produce equal forces (∼3.35N). This demonstration of low-power, minimal-heat exposure SMA actuation holds promise for many future wearable actuation applications, including dynamic compression garments.more » « less
-
Abstract Recent work has demonstrated the potential of actuators consisting of bulk elastomers with phase‐changing inclusions for generating high forces and large volumetric expansions. Simultaneously, granular assemblies have been shown to enable tunable properties via different packings, dynamic moduli via jamming, and compatibility with various printing methods via suspension in carrier fluids. Herein, granular actuators are introduced, which represent a new class of soft actuators made of discrete grains. The soft grains consist of a hyperelastic shell and multiple solvent cores. Upon heating, the encapsulated solvent cores undergo liquid‐to‐gas phase change, inducing rapid and strong volumetric expansion of the hyperelastic shell up to 700%. The grains can be used independently for micro‐actuation, or in granular agglomerates for meso‐ and macroscale actuation, demonstrating the scalability of the granular actuators. Furthermore, the active grains can be suspended in a carrier resin or solvent to enable printable soft actuators via established granular material processing techniques. By combining the advantages of phase‐change soft actuation and granularity, this work presents the opportunity to realize soft actuators with tunable bulk properties, compatibility with self‐assembly techniques, and on‐demand reconfigurability.more » « less
