Abstract Supershear earthquakes, propagating faster than the Earth's shear wave velocity, can generate strong ground motion at distances far from the ruptured fault. Despite the hazards associated with these earthquakes, the exact fault properties that govern their occurrence are not well constrained. Although early studies associated supershear ruptures with simple fault geometries, recent dynamic rupture models have revealed a supershear transition mechanism over complex fault geometries such as fault stepovers. Here we present the first observation of a supershear transition on a fault stepover system during the 2017 Mw7.7 Komandorsky Islands earthquake. Using a high‐resolution back‐projection technique, we find that the earthquake's rupture velocity accelerates from 2.1 to 5.0 km/s between two offset faults, demonstrating the viability of a new supershear transition mechanism occurring in nature. Given the fault complexity of the Earth's transform plate boundaries, this result may improve our understanding of supershear rupture processes and their associated hazards.
more »
« less
This content will become publicly available on August 28, 2025
Weak, Vertically Stronger Main Himalayan Thrust in the India‐Asia Collision
Abstract Megathrusts at convergent plate boundaries generate the largest and some of the most hazardous earthquakes on Earth. However, their physical properties, including those influencing fault slip accumulation and release and earthquake‐related surface displacements, are still poorly constrained at critical depths. Here, we combine seismic imaging and geodetic modeling to investigate the structure and mechanical behavior of the Main Himalayan Thrust fault (MHT) in the center of the 2015 Mw 7.8 Gorkha rupture in Nepal. Our results from two independent observations consistently suggest the presence of a channel associated with the MHT with high compliance (shear modulus as low as ∼4 GPa) and strain anisotropy (stiffer in the vertical orientation than in the horizontal), likely arising from a weak subducting layer with north‐dipping foliation. Such mechanical heterogeneity significantly influences the quantification of short‐term fault kinematics and associated earthquake potential, with implications on across‐scale dynamics of plate boundaries in Himalaya and elsewhere.
more »
« less
- PAR ID:
- 10585001
- Publisher / Repository:
- American Geophysical Union
- Date Published:
- Journal Name:
- Geophysical Research Letters
- Volume:
- 51
- Issue:
- 16
- ISSN:
- 0094-8276
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The 11 March 2011 M 9.0 Tohoku-oki earthquake was one of the largest earthquakes ever recorded and was accompanied by a devastating tsunami. Slip during the earthquake was exceptionally large at shallow depth on the plate boundary fault, which was one of the primary factors that contributed to the extreme tsunami amplitudes that inundated the coast of Japan. International Ocean Discovery Program Expedition 405 aims to investigate the conditions and processes that facilitated the extremely shallow slip on the subduction interface in the 2011 Tohoku-oki earthquake. Proposed work includes coring and logging operations at two sites in a transect across the trench. The first site, located within the overriding plate, will access the fault zone in the region of large shallow slip, targeting the plate boundary décollement, overlying frontal prism, and subducted units cut by the décollement. The second site, located on the Pacific plate, will access the undisturbed sedimentary and volcanic inputs to the subduction zone. A borehole observatory will be installed into the décollement and surrounding rocks to provide measurements of the temperature in and around the fault over the following several years. Sampling, geophysical logs, and the observatory temperature time series will document the compositional, structural, mechanical, and frictional properties of the rocks in the décollement and adjacent country rock, as well as the hydrogeologic structure and pore fluid pressure of the fault zone and frontal prism—key properties that influence the effective stress to facilitate earthquake slip and potential for large slip. Results from Expedition 405 will address fundamental questions about earthquake slip on subduction zones that may directly inform earthquake and tsunami hazard assessments around the world.more » « less
-
Abstract A devastating magnitude 7.2 earthquake struck Southern Haiti on 14 August 2021. The earthquake caused severe damage and over 2000 casualties. Resolving the earthquake rupture process can provide critical insights into hazard mitigation. Here we use integrated seismological analyses to obtain the rupture history of the 2021 earthquake. We find the earthquake first broke a blind thrust fault and then jumped to a disconnected strike‐slip fault. Neither of the fault configurations aligns with the left‐lateral tectonic boundary between the Caribbean and North American plates. The complex multi‐fault rupture may result from the oblique plate convergence in the region, so that the initial thrust rupture is due to the boundary‐normal compression and the following strike‐slip faulting originates from the Gonâve microplate block movement, orienting SW‐NE direction. The complex rupture development of the earthquake suggests that the regional deformation is accommodated by a network of segmented faults with diverse faulting conditions.more » « less
-
Abstract Plate motion obliquity along the dominantly transform Queen Charlotte plate boundary (QCPB) peaks offshore Haida Gwaii. To investigate the effects of obliquity on plate boundary deformation, we analyze continuous seismic waveforms from temporary and permanent stations from 1998 to 2020 to generate a catalog of ∼50,000 earthquakes across Haida Gwaii. We use an automated technique based on auto‐regressive phase detection and onset estimation to obtain the initial seismic catalog, integrate existing catalogs, invert for 3D velocity structure using data from the best constrained period, and relocate the entire catalog using the new 3D velocity model. We investigate the seismically active sections of the transcurrent Queen Charlotte fault (QCF), noting that little seismicity locates directly along its bathymetrically defined trace. Instead, seismicity illuminates a complex system of segmented structures with variable geometries along strike. Other clusters highlight active shallow faults within the highly deformed Queen Charlotte terrace. Few aftershocks appear on the thrust plane of the 2012Mw7.8 Haida Gwaii earthquake except near its inferred intersection with the QCF at 15–20 km depths, suggesting elevated residual stress at the juncture of slip‐partitioning. Deep crustal seismicity (up to ∼20 km depths) beneath central Haida Gwaii aligned parallel to the strike of the thrust plane may represent landward underthrusting of the Pacific plate. Our results suggest possible coseismic strike‐slip rupture on the QCF during the 2012 earthquake and add support to the thesis that highly oblique transform boundaries are viable settings for subduction initiation.more » « less
-
Abstract Fault regions inferred to be slowly slipping are interpreted to accommodate much of tectonic plate motion aseismically and potentially serve as barriers to earthquake rupture. Here, we build on prior work using simulations of earthquake sequences with enhanced dynamic fault weakening to show how fault regions that exhibit decades of steady creep or transient slow‐slip events can be driven to dynamically fail by incoming earthquake ruptures. Following substantial earthquake slip, such regions can be under‐stressed and locked for centuries prior to slowly slipping again. Our simulations illustrate that slow fault slip indicates that a region is sufficiently loaded to be failing about its quasi‐static strength. Hence, if a fault region is susceptible to failing dynamically, then observations of slow slip could serve as an indication that the region is critically stressed and ready to fail in a future earthquake, posing a qualitatively different interpretation of slow slip for seismic hazard.more » « less