An official website of the United States government
ABSTRACT A major earthquake ruptured the Cascadia subduction zone (CSZ) on 26 January 1700. Key paleoseismic evidence associated with this event include tsunami deposits, stratigraphic evidence of coastal coseismic subsidence, written Japanese records of a tsunami unaccompanied by earthquake shaking, and margin-wide turbidites found offshore and in lacustrine environments. Despite this wealth of independent clues, important details about this event remain unresolved. Dating uncertainties do not conclusively establish whether the proxies are from one earthquake or a sequence of them, and we have limited knowledge of the likely slip distributions of the event or events. Here, we use a catalog of 37,500 candidate synthetic ruptures between Mw 7.8 and 9.2 and simulate their resulting coseismic deformation and tsunami inundation. Each model is then compared against estimated Japan tsunami arrivals, regional coastal subsidence records, and local paleotsunami deposits mapped at six different coastal marshes and one coastal lake along the CSZ. We find that seven full-margin ruptures with a median magnitude of Mw 9.1 satisfy all three constraints. We favor one Mw 9.11 model that best matches all site paleoseismic observations and suggests that the Cascadia megathrust slipped up to ∼30 m and must have shallow geodetic coupling. We also find that some sequences composed of three or four ruptures can still satisfy the observations, yet no sequences of two ruptures can. Sequences are differentiated into three groups based on whether they contain a mainshock rupture located in the south (>44° N) or further north. All sequences contain unruptured portions of the megathrust and most contain mainshocks with peak slip above 40 m. The fit of the geologic evidence from sequences is poor in comparison to single-event models. Therefore, sequences are generally less favored compared to full-margin events.
more »
« less
This content will become publicly available on January 24, 2026
Combining Multisite Tsunami and Deformation Modeling to Constrain Slip Distributions for the 1700 C.E. Cascadia Earthquake
A major earthquake ruptured the Cascadia subduction zone (CSZ) on 26 January 1700. Key paleoseismic evidence associated with this event include tsunami deposits, stratigraphic evidence of coastal coseismic subsidence, written Japanese records of a tsunami unaccompanied by earthquake shaking, and margin‐wide turbidites found offshore and in lacustrine environments. Despite this wealth of independent clues, important details about this event remain unresolved. Dating uncertainties do not conclusively establish whether the proxies are from one earthquake or a sequence of them, and we have limited knowledge of the likely slip distributions of the event or events. Here, we use a catalog of 37,500 candidate synthetic ruptures between 7.8 and 9.2 and simulate their resulting coseismic deformation and tsunami inundation. Each model is then compared against estimated Japan tsunami arrivals, regional coastal subsidence records, and local paleotsunami deposits mapped at six different coastal marshes and one coastal lake along the CSZ. We find that seven full‐margin ruptures with a median magnitude of 9.1 satisfy all three constraints. We favor one 9.11 model that best matches all site paleoseismic observations and suggests that the Cascadia megathrust slipped up to ∼30 m and must have shallow geodetic coupling. We also find that some sequences composed of three or four ruptures can still satisfy the observations, yet no sequences of two ruptures can. Sequences are differentiated into three groups based on whether they contain a mainshock rupture located in the south (>44° N) or further north. All sequences contain unruptured portions of the megathrust and most contain mainshocks with peak slip above 40 m. The fit of the geologic evidence from sequences is poor in comparison to single‐event models. Therefore, sequences are generally less favored compared to full‐margin events.
more »
« less
- Award ID(s):
- 2325312
- PAR ID:
- 10586374
- Publisher / Repository:
- GeoScienceWorld
- Date Published:
- Journal Name:
- Bulletin of the Seismological Society of America
- ISSN:
- 0037-1106
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract From California to British Columbia, the Pacific Northwest coast bears an omnipresent earthquake and tsunami hazard from the Cascadia subduction zone. Multiple lines of evidence suggests that magnitude eight and greater megathrust earthquakes have occurred ‐ the most recent being 321 years ago (i.e., 1700 A.D.). Outstanding questions for the next great megathrust event include where it will initiate, what conditions are favorable for rupture to span the convergent margin, and how much slip may be expected. We develop the first 3‐D fully dynamic rupture simulations for the Cascadia subduction zone that are driven by fault stress, strength and friction to address these questions. The initial dynamic stress drop distribution in our simulations is constrained by geodetic coupling models, with segment locations taken from geologic analyses. We document the sensitivity of nucleation location and stress drop to the final seismic moment and coseismic subsidence amplitudes. We find that the final earthquake size strongly depends on the amount of slip deficit in the central Cascadia region, which is inferred to be creeping interseismically, for a given initiation location in southern or northern Cascadia. Several simulations are also presented here that can closely approximate recorded coastal subsidence from the 1700 A.D. event without invoking localized high‐stress asperities along the down‐dip locked region of the megathrust. These results can be used to inform earthquake and tsunami hazards for not only Cascadia, but other subduction zones that have limited seismic observations but a wealth of geodetic inference.more » « less
-
Abstract At subduction zones, the down‐dip limit of slip represents how deep an earthquake can rupture. For hazards it is important ‐ it controls the intensity of shaking and the pattern of coseismic uplift and subsidence. In the Cascadia Subduction Zone, because no large magnitude events have been observed in instrumental times, the limit is inferred from geological estimates of coastal subsidence during previous earthquakes; it is typically assumed to coincide approximately with the coastline. This is at odds with geodetic coupling models as it leaves residual slip deficits unaccommodated on a large swath of the megathrust. Here we will show that ruptures can penetrate deeper into the megathrust and still produce coastal subsidence provided slip decreases with depth. We will discuss the impacts of this on expected shaking intensities.more » « less
-
Abstract Lithology and microfossil biostratigraphy beneath the marshes of a central Oregon estuary limit geophysical models of Cascadia megathrust rupture during successive earthquakes by ruling out >0.5 m of coseismic coastal subsidence for the past 2000 yr. Although the stratigraphy in cores and outcrops includes as many as 12 peat-mud contacts, like those commonly inferred to record subsidence during megathrust earthquakes, mapping, qualitative diatom analysis, foraminiferal transfer function analysis, and 14C dating of the contacts failed to confirm that any contacts formed through subsidence during great earthquakes. Based on the youngest peat-mud contact’s distinctness, >400 m distribution, ∼0.6 m depth, and overlying probable tsunami deposit, we attribute it to the great 1700 CE Cascadia earthquake and(or) its accompanying tsunami. Minimal changes in diatom assemblages from below the contact to above its probable tsunami deposit suggest that the lower of several foraminiferal transfer function reconstructions of coseismic subsidence across the contact (0.1–0.5 m) is most accurate. The more limited stratigraphic extent and minimal changes in lithology, foraminifera, and(or) diatom assemblages across the other 11 peat-mud contacts are insufficient to distinguish them from contacts formed through small, gradual, or localized changes in tide levels during river floods, storm surges, and gradual sea-level rise. Although no data preclude any contacts from being synchronous with a megathrust earthquake, the evidence is equally consistent with all contacts recording relative sea-level changes below the ∼0.5 m detection threshold for distinguishing coseismic from nonseismic changes.more » « less
-
Tsunamis generated by seafloor displacements accompanying large submarine earthquakes provide sensitivity to absolute slip position and distribution for offshore faulting analogous to that of geodetic observations for landward faulting. Tsunami recordings at deep‐water and near‐shore ocean bottom pressure sensors and tide gauges, along with runup and inundation measurements, can now be reliably modeled using detailed bathymetric structures and robust numerical codes. As a result, tsunami observations now play an important role in quantifying coseismic slip distributions for large submarine earthquakes in subduction zones and other tectonic environments. Applications of joint modeling or inversion of seismic, geodetic and tsunami observations for recent major earthquakes are described, highlighting the specific contributions of the tsunami observations to source model resolution. Tsunami observations provide unique information on the up‐dip extent of earthquake coseismic slip on subduction zone megathrust faults and occurrence of near‐trench slip, which are usually not well constrained by seismic and land‐based geodetic signals. Tsunami signals also help to detect offshore slow slip that is not evident in seismic or land‐based geodetic data and to balance geophysical constraints on ruptures that extend from on‐shore to off‐shore. Tsunami runup measurements and stratigraphic deposits further provide unique constraints on large earthquake ruptures that occurred prior to modern geophysical instrumentation.more » « less
