skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


This content will become publicly available on February 7, 2026

Title: Passive Frequency Tuning of Kinetic Energy Harvesters Using Distributed Liquid-Filled Mass
Micro-scale kinetic energy harvesters are in large demand to function as sustainable power sources for wireless sensor networks and the Internet of Things. However, one of the challenges associated with them is their inability to easily tune the frequency during the manufacturing process, requiring devices to be custom-made for each application. Previous attempts have either used active tuning, which consumes power, or passive devices that increase their energy footprint, thus decreasing power density. This study involved developing a novel passive method that does not alter the device footprint or power density. It involved creating a proof mass with an array of chambers or cavities that can be individually filled with liquid to alter the overall proof mass as well as center of gravity. The resonant frequency of a rectangular cantilever can then be altered by changing the location, density, and volume of the liquid-filled mass. The resolution can be enhanced by increasing the number of chambers, whereas the frequency tuning range can be increased by increasing the amount of liquid or density of the liquids used to fill the cavities. A piezoelectric cantilever with a 340 Hz initial resonant frequency was used as the testing device. Liquids with varying density (silicone oil, liquid sodium polytungstate, and Galinstan) were investigated. The resonant frequencies were measured experimentally by filling various cavities with these liquids to determine the tuning frequency range and resolution. The tuning ranges of the first resonant frequency mode for the device were 142–217 Hz, 108–217 Hz, and 78.4–217 Hz for silicone oil, liquid sodium polytungstate, and Galinstan, respectively, with a sub Hz resolution.  more » « less
Award ID(s):
2237086
PAR ID:
10586733
Author(s) / Creator(s):
;
Publisher / Repository:
MDPI
Date Published:
Journal Name:
Actuators
Volume:
14
Issue:
2
ISSN:
2076-0825
Page Range / eLocation ID:
78
Subject(s) / Keyword(s):
energy harvester piezoelectric frequency tuning liquid mass cantilever
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, ASME International Mechanical Engineering Congress and Exposition)
    Creating self-sustaining wireless sensor networks to power the Internet of Things requires universal energy harvesting systems. MEMS energy harvesters are in particular demand as they can be batch fabricated to meet the large supply demands. However, currently silicon MEMS kinetic energy harvesters are fabricated with a narrow bandwidth of 1–2 Hz, so each application requires a custom designed device which limits the advantages of batch fabrication. This paper investigates the development of a passive tuning MEMS vibration energy harvesting method that is based on distributing the load to various locations along the proof mass using a liquid load. A 3D printed proof mass with an array of cavities was developed, where each cavity could be filled with liquid to alter the resonant frequency as desired. Cavities were filled with silicone oil to validate the concept. The results illustrate tuning of the frequency with a resolution of < 1 Hz and a range of approximately 50 Hz. This method represents a passive tuning method as no power is required and the tuning can be accomplished during manufacturing so that one single universal energy harvester could be made and then tuned to meet the end user’s frequency specification. 
    more » « less
  2. ; (, Applied sciences)
    The inability to tune the frequency of MEMS vibration energy-harvesting devices is considered to be a major challenge which is limiting the use of these devices in real world applications. Previous attempts are either not compatible with microfabrication, have large footprints, or use complex tuning methods which consume power. This paper reports on a novel passive method of tuning the frequency by embedding solid microparticle masses into a stationary proof mass with an array of cavities. Altering the location, density, and volume of embedded solid filler will affect the resonant frequency, resulting in tuning capabilities. The experimental and computational validation of changing and tuning the frequency are demonstrated. The change in frequency is caused by varying the location of the particle filler in the proof mass to alter the center of gravity. The goal of this study was to experimentally and numerically validate the concept using macro-scale piezoelectric energy-harvesting devices, and to determine key parameters that affect the resolution and range of the frequency-tuning capabilities. The experimental results demonstrated that the range of the frequency tuning for the particular piezoelectric cantilever that was used was between 20.3 Hz and 49.1 Hz. Computational simulations gave similar results of 23.7 Hz to 49.4 Hz. However, the tuning range could be increased by altering the proof mass and cantilever design, which resulted in a tuning range from 144.6 Hz to 30.2 Hz. The resolution of tuning the frequency was <0.1 Hz 
    more » « less
  3. ; (, American Society of Mechanical Engineers)
    Microelectromechanical Systems (MEMS) packaging is over 80% of the cost of a typical MEMS device because there are no standard packaging methods, and each device requires unique packaging. Recently several MEMS devices have illustrated the desire to have a liquid filled cavity within the MEMS device for applications such as biomedical sensors, tunable energy harvesters, or liquid cooling microelectronics. However, embedded liquids in silicon pose a challenge when it comes to packaging. This paper illustrates a novel concept of using a conformal parylene coating to cap or encapsulate the liquid. The concept is validated using various liquids such as various viscosity silicone oils as well as Galinstan a Ga-based liquid metal. The study investigates the packaging reliability through a series of systematic accelerated life-time testing, elevated temperature testing, accelerated soak testing, and mechanical testing (shock and resonant frequency testing). Mass changes were monitored and compared to control (no capping), glass epoxy bonded packaging, and silicone spray coating encapsulation. The results demonstrate the superior mean-time-to-failure of the parylene capping method compared to the other methods. The results confirm that parylene can be used to package embedded liquids in silicon or 3D printed structures. 
    more » « less
  4. ; (, Advanced Materials Technologies)
    Abstract As stretchable devices become well established for applications in soft robotics and wearable devices, the compliant conductors that make these applications possible must also be reliable and survive for the entire device lifetime. Liquid metals such as Galinstan are a potential solution as non‐toxic, stretchable, and low‐resistance conductors. Rigorous investigations of liquid metal lifetimes, however, are limited. This work presents the median lifetime of liquid metal‐filled silicone tubes under current density on the order of 1 kAcm−2, which is necessary for applications such as electromagnetic actuators. In these conductors, the median lifetime increases by a factor of over 4700 as current decreases from 2 to 1 kAcm−2. By cooling the sample, median failure time increases from 112 s to 9.4 h, which suggests straightforward solutions to maximize liquid metal wire lifetime by increasing thermal conductivity or by duty cycling the applied current. 
    more » « less
  5. ; ; ; ; (, Proceedings of the 2020 IEEE International Conference on Robotics and Automation)
    null (Ed.)
    Soft materials and compliant actuation concepts have generated new design and control approaches in areas from robotics to wearable devices. Despite the potential of soft robotic systems, most designs currently use hard pumps, valves, and electromagnetic actuators. In this work, we take a step towards fully soft robots by developing a new compliant electromagnetic actuator architecture using gallium-indium liquid metal conductors, as well as compliant permanent magnetic and compliant iron composites. Properties of the new materials are first characterized and then co-fabricated to create an exemplary biologically-inspired soft actuator with pulsing or grasping motions, similar to Xenia soft corals. As current is applied to the liquid metal coil, the compliant permanent magnetic tips on passive silicone arms are attracted or repelled. The dynamics of the robotic actuator are characterized using stochastic system identification techniques and then operated at the resonant frequency of 7 Hz to generate high-stroke (>6 mm) motions. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email