An official website of the United States government
Abstract The broad employment of water electrolysis for hydrogen (H2) production is restricted by its large voltage requirement and low energy conversion efficiency because of the sluggish oxygen evolution reaction (OER). Herein, we report a strategy to replace OER with a thermodynamically more favorable reaction, the partial oxidation of formaldehyde to formate under alkaline conditions, using a Cu3Ag7electrocatalyst. Such a strategy not only produces more valuable anodic product than O2but also releases H2at the anode with a small voltage input. Density functional theory studies indicate the H2C(OH)O intermediate from formaldehyde hydration can be better stabilized on Cu3Ag7than on Cu or Ag, leading to a lower C-H cleavage barrier. A two-electrode electrolyzer employing an electrocatalyst of Cu3Ag7(+)||Ni3N/Ni(–) can produce H2at both anode and cathode simultaneously with an apparent 200% Faradaic efficiency, reaching a current density of 500 mA/cm2with a cell voltage of only 0.60 V.
more »
« less
This content will become publicly available on February 21, 2026
Nickel promotes selective ethylene epoxidation on silver
Over the last 80 years, chlorine (Cl) has been the primary promoter of the ethylene epoxidation reaction valued at ~40 billion USD per year, providing a ~25% selectivity increase over unpromoted silver (Ag) (~55%). Promoters such as cesium, rhenium, and molybdenum each add a few percent of selectivity enhancements to achieve 90% overall, but their codependence on Cl makes optimizing and understanding their function complex. We took a theory-guided, single-atom alloy approach to identify nickel (Ni) as a dopant in Ag that can facilitate selective oxidation by activating molecular oxygen (O2) without binding oxygen (O) too strongly. Surface science experiments confirmed the facile adsorption/desorption of O2on NiAg, as well as demonstrating that Ni serves to stabilize unselective nucleophilic oxygen. Supported Ag catalyst studies revealed that the addition of Ni in a 1:200 Ni to Ag atomic ratio provides a ~25% selectivity increase without the need for Cl co-flow and acts cooperatively with Cl, resulting in a further 10% initial increase in selectivity.
more »
« less
- Award ID(s):
- 2154952
- PAR ID:
- 10586793
- Publisher / Repository:
- AAAS
- Date Published:
- Journal Name:
- Science
- Volume:
- 387
- Issue:
- 6736
- ISSN:
- 0036-8075
- Page Range / eLocation ID:
- 869 to 873
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Incorporation of CF2X groups beyond CF3into arene scaffolds is underdeveloped despite these groups’ utility as halogen‐bond donors and as precursors to bioisosteres. Herein, we report the synthesis, characterization, and comparative photochemistry of a suite of [Ag(II)(bpy)2O2CCF2X]+and Ag(II)(bpy)(O2CCF2X)2(bpy = 2,2´‐bipyridine, X = F, CF3, Cl, Br, H, CH3) carboxylate complexes. We find a dramatic effect of the X substituent on the efficiency of generating CF2X radicals by ligand‐to‐metal charge transfer (LMCT), with Ag(II) photoreduction rates varying by over an order of magnitude and quantum yields spanning over 20%. We provide insight into how electronic and structural perturbations of the Ag(II)–O2CCF2X core are manifested in the LMCT quantum efficiency. With this information in hand, Ag(II)‐mediated electrophotocatalytic CF2X functionalization is carried out on a range of (hetero)arenes. This work expands the nascent field of Ag(II)‐based photocatalysis by allowing for (hetero)aryl–CF2X functionalization directly from unactivated fluoroalkyl carboxylate precursors.more » « less
-
The crystal structure of the title compound, hexaaquanickel(II) dichloride–1,4,7,10,13,16-hexaoxacyclooctadecane–water (1/2/2), [Ni(H2O)6]Cl2·2C12H24O6·2H2O, is reported. The asymmetric unit contains half of the Ni(OH2)6moiety with a formula of C12H32ClNi0.50O10at 105 K and triclinic (P1) symmetry. The [Ni(OH2)6]2+cation has close to ideal octahedral geometry with O—Ni—O bond angles that are within 3° of idealized values. The supramolecular structure includes hydrogen bonding between the water ligands, 18-crown-6 molecules, Cl−anions, and co-crystallized water solvent. Two crown ether molecules flank the [Ni(OH2)6]2+molecule at the axial positions in a sandwich-like structure. The relatively symmetric hydrogen-bonding network is enabled by small Cl−counter-ions and likely influences the more idealized octahedral geometry of [Ni(OH2)6]2+.more » « less
-
Abstract Understanding the thermal decomposition of metal salt precursors on carbon structures is essential for the controlled synthesis of metal‐decorated carbon nanomaterials. Here, the thermolysis of a Ni precursor salt, NiCl2·6H2O, on amorphous carbon (a‐C) and graphene oxide (GO) substrates is explored using in situ transmission electron microscopy. Thermal decomposition of NiCl2·6H2O on GO occurs at higher temperatures and slower kinetics than on a‐C substrate. This is correlated to a higher activation barrier for Cl2removal calculated by the density functional theory, strong Ni‐GO interaction, high‐density oxygen functional groups, defects, and weak van der Waals using GO substrate. The thermolysis of NiCl2·6H2O proceeds via multistep decomposition stages into the formation of Ni nanoparticles with significant differences in their size and distribution depending on the substrate. Using GO substrates leads to nanoparticles with 500% smaller average sizes and higher thermal stability than a‐C substrate. Ni nanoparticles showcase thefcccrystal structure, and no size effect on the stability of the crystal structure is observed. These findings demonstrate the significant role of carbon substrate on nanoparticle formation and growth during the thermolysis of carbon–metal heterostructures. This opens new venues to engineer stable, supported catalysts and new carbon‐based sensors and filtering devices.more » « less
-
Abstract Here, we present results of a computational and experimental study of adsorption of various metals on MoS2. In particular, we analyzed the binding mechanism of four metallic elements (Ag, Au, Cu, Ni) on MoS2. Among these elements, Ni exhibits the strongest binding and lowest mobility on the surface of MoS2. On the other hand, Au and Ag bond very weakly to the surface and have very high mobilities. Our calculations for Cu show that its bonding and surface mobility are between these two groups. Experimentally, Ni films exhibit a composition characterized by randomly oriented nanoscale clusters. This is consistent with the larger cohesive energy of Ni atoms as compared with their binding energy with MoS2, which is expected to result in 3D clusters. In contrast, Au and Ag tend to form atomically flat plateaued structures on MoS2, which is contrary to their larger cohesive energy as compared to their weak binding with MoS2. Cu displays a surface morphology somewhat similar to Ni, featuring larger nanoscale clusters. However, unlike Ni, in many cases Cu exhibits small plateaued surfaces on these clusters. This suggests that Cu likely has two competing mechanisms that cause it to span the behaviors seen in the Ni and Au/Ag film morphologies. These results indicate that calculations of the initial binding conditions could be useful for predicting film morphologies. In addition, out calculations show that the adsorption of adatoms with odd electron number like Ag, Au, and Cu results in 100% spin-polarization and integer magnetic moment of the system. Adsorption of Ni adatoms, with even electron number, does not induce a magnetic transition.more » « less
