skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Spectral Behavior of Fiber Bragg Gratings during Embedding in 3D-Printed Metal Tensile Coupons and Cyclic Loading
Additive manufacturing (AM) enables the spatially configurable 3D integration of sensors in metal components to realize smart materials and structures. Outstanding sensing capabilities and size compatibility have made fiber optic sensors excellent candidates for integration in AM components. In this study, fiber Bragg grating (FBG) sensors were embedded in Inconel 718 tensile coupons printed using laser powder bed fusion AM. On-axis (fiber runs through the coupon’s center of axis) and off-axis (fiber is at 5° and 10° to the coupon’s center of axis) sensors were buried in epoxy resin inside narrow channels that run through the coupons. FBGs’ spectral evolutions during embedment in the coupons were examined and cyclic loading experiments were conducted to analyze and evaluate the sensor integration process, complex strain loading, process flaws, and sensing performance. This study also demonstrates that the AM process-born deficiencies such as poor surface finish and staircase effects can be detrimental to the embedded sensors and their sensing performance.  more » « less
Award ID(s):
2112650
PAR ID:
10591728
Author(s) / Creator(s):
; ;
Publisher / Repository:
MDPI
Date Published:
Journal Name:
Sensors
Volume:
24
Issue:
12
ISSN:
1424-8220
Page Range / eLocation ID:
3919
Subject(s) / Keyword(s):
smart materials and structures additive manufacturing embedded optical sensors strain loading spectral response
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Composites science and technology)
    null (Ed.)
    Structural health monitoring of fiber reinforced composites is an extensive field of research that aims to reduce maintenance costs through in-situ damage detection. However, the need for externally bonded sensor systems and complicated fabrication processes limit the widespread application of most current structural health monitoring techniques. This work introduces a novel multifunctional fiber reinforced composite that relies on a ferroelectric prepreg fabricated using dehydrofluorinated (DHF) polyvinylidene fluoride (PVDF), which exhibits a thermally stable piezoelectric response. The self-sensing material presented in this work requires minimal external components, as the piezoelectric sensing mechanism is fully contained within the composite. This is accomplished by fabricating a ferroelectric prepreg consisting of DHF PVDF infused woven fiberglass, which is sandwiched between woven carbon fabric layers that act as electrodes, thus forming a piezoelectric sensor fabricated with entirely structural composite materials. Notably, the sensing material is a fully distributed prepreg rather than discretely embedded sensors which enables simplified monitoring of complex structures. As the composite experiences damage under flexural and tensile loading, the internal change in strain results in a charge separation that is detectable as a voltage emission across the sample electrodes. The self-sensing capabilities of this material are explored using traditional mechanical testing techniques, showing comparable performance to common damage detection methods, all while eliminating the need for external bonding of sensors to the structure. 
    more » « less
  2. (, Composites science and technology)
    null (Ed.)
    Structural health monitoring of fiber reinforced composites is an extensive field of research that aims to reduce maintenance costs through in-situ damage detection. However, the need for externally bonded sensor systems and complicated fabrication processes limit the widespread application of most current structural health monitoring techniques. This work introduces a novel multifunctional fiber reinforced composite that relies on a ferroelectric prepreg fabricated using dehydrofluorinated (DHF) polyvinylidene fluoride (PVDF), which exhibits a thermally stable piezoelectric response. The self-sensing material presented in this work requires minimal external components, as the piezoelectric sensing mechanism is fully contained within the composite. This is accomplished by fabricating a ferroelectric prepreg consisting of DHF PVDF infused woven fiberglass, which is sandwiched between woven carbon fabric layers that act as electrodes, thus forming a piezoelectric sensor fabricated with entirely structural composite materials. Notably, the sensing material is a fully distributed prepreg rather than discretely embedded sensors which enables simplified monitoring of complex structures. As the composite experiences damage under flexural and tensile loading, the internal change in strain results in a charge separation that is detectable as a voltage emission across the sample electrodes. The self-sensing capabilities of this material are explored using traditional mechanical testing techniques, showing comparable performance to common damage detection methods, all while eliminating the need for external bonding of sensors to the structure. 
    more » « less
  3. ; (, Proceedings of the ASME 2017 Conference on Smart Materials, Adaptive Structures and Intelligent Systems)
    Embedded fiber Bragg grating (FBG) sensors are attractive for in-situ structural monitoring, especially in fiber reinforced composites. Their implementation in metallic structures is hindered by the thermal limit of the protective coating, typically a polymer material. The purpose of this study is to demonstrate the embedding of FBG sensors into metals with the ultimate objective of using FBG sensors for structural health monitoring of metallic structures. To that end, ultrasonic additive manufacturing (UAM) is utilized. UAM is a solid-state manufacturing process based on ultrasonic metal welding that allows for layered addition of metallic foils without melting. Embedding FBGs through UAM is shown to result in total cross-sectional encapsulation of the sensors within the metal matrix, which encourages uniform strain transfer. Since the UAM process takes place at essentially room temperature, the industry standard acrylate protective coating can be used rather than requiring a new coating applied to the FBGs prior to embedment. Measurements presented in this paper show that UAM-embedded FBG sensors accurately track strain at temperatures higher than 400 C. The data reveals the conditions under which detrimental wavelength hopping takes place due to non-uniformity of the load transferred to the FBG. Further, optical cross-sectioning of the test specimens shows inhibition of the thermal degradation of the protective coating. It is hypothesized that the lack of an atmosphere around the fully-encapsulated FBGs makes it possible to operate the sensors at temperatures well above what has been possible until now. Embedded FBGs were shown to retain their coatings when subjected to a thermal loading that would result in over 50 percent degradation (by volume and mass) in atmospherically exposed fiber. 
    more » « less
  4. ; ; ; ; (, Structural Health Monitoring)
    This study presents an experimental investigation on the combined effect of mechanical loads and corrosion using the designed polytetrafluoroethylene tube-packaged fiber Bragg grating (FBG) sensors, as to implement long-gauge FBG (LFBG) sensors in corrosion detection practices for structural health monitoring. A simplified LFBG-based sensing model was proposed for strain measurement in terms of the Bragg wavelength change. Correspondingly, a systematic corrosion assessment strategy was developed to estimate corrosion severity and average corrosion rate. Upon this, the experimental study was performed on epoxy-coated steel specimens embedded with LFBG sensors, where the loading, corrosion, and combined loading–corrosion tests were used to explore the effect of mechanical loads on corrosion behavior. Test results revealed that the specimens subjected to combined conditions exhibited more severe corrosion damage. The maximum mass loss was observed to be 1.82 and 2.43 in percentage under individual corrosion and combined loading–corrosion conditions, respectively. Also, the pit depth under combined conditions was found to develop rapidly in the early stage. The pit depth severity ratio was around 0.2–0.8 during the 67 days of exposure, indicating an evident impact of loading on corrosion severity. Furthermore, the maximum average corrosion rate under combined conditions was found to be 5.66 times that under individual corrosion conditions. 
    more » « less
  5. ; ; ; (, American Society of Mechanical Engineers)
    Abstract The demand for the capacitive sensor has attracted substantial attention in monitoring pressure due to its distinctive design and passive nature with versatile sensing capability. The effectiveness of the capacitive sensor primarily relies on the variation in thickness of the dielectric layer sandwiched between conductive electrodes. Additive manufacturing (AM), a set of advanced fabrication techniques, enables the production of functional electronic devices in a single-step process. Particularly, the 3D printing approach based on photocuring is a tailorable process in which the resin consists of multiple components that deliver essential mechanical qualities with enhanced sensitivity towards targeted measurements. However, the availability of photocurable resin exhibiting essential flexibility and dielectric properties for the UV-curing production process is limited. The necessity of a highly stable and sensitive capacitive sensor demands a photocurable polymer resin with a higher dielectric constant and conductive electrodes. The primary purpose of this study is to design and fabricate a capacitive device composed of novel photocurable Polyvinylidene fluoride (PVDF) resin utilizing an LCD process exhibiting higher resolution with electrodes embedded inside the substrate. The embedded electrode channels in PVDF substrate are filled with conductive silver paste by an injection process. The additively manufactured sensor provides pressure information by means of a change in capacitance of the dielectric material between the electrodes. X-Ray based micro CT-Scan ex-situ analysis is performed to visualize the capacitance based sensor filled with conductive electrodes. The sensor is tested to measure capacitance response with changes in pressure as a function of time that are utilized for sensitivity analysis. This work represents a significant achievement of AM integration in developing efficient and robust capacitive sensors for pressure monitoring or wearable electronic applications. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email