skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


This content will become publicly available on November 1, 2025

Title: Surface Passivation to Improve the Performance of Perovskite Solar Cells
Perovskite solar cells (PSCs) suffer from a quick efficiency drop after fabrication, partly due to surface defects, and efficiency can be further enhanced with the passivation of surface defects. Herein, surface passivation is reviewed as a method to improve both the stability and efficiency of PSCs, with an emphasis on the chemical mechanism of surface passivation. Various molecules are utilized as surface passivants, such as halides, Lewis acids and bases, amines (some result in low-dimensional perovskite), and polymers. Multifunctional molecules are a promising group of passivants, as they are capable of passivating multiple defects with various functional groups. This review categorizes these passivants, in addition to considering the potential and limitations of each type of passivant. Additionally, surface passivants for Sn-based PSCs are discussed since this group of PSCs has poor photovoltaic performance compared to their lead-based counterpart due to their severe surface defects. Lastly, future perspectives on the usage of surface passivation as a method to improve the photovoltaic performance of PSCs are addressed to provide a direction for upcoming research and practical applications.  more » « less
Award ID(s):
2053954
PAR ID:
10595657
Author(s) / Creator(s):
;
Publisher / Repository:
Energies
Date Published:
Journal Name:
Energies
Volume:
17
Issue:
21
ISSN:
1996-1073
Page Range / eLocation ID:
5282
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; (, Angewandte Chemie International Edition)
    Abstract The ability to passivate defects and modulate the interface energy‐level alignment (IEA) is key to boost the performance of perovskite solar cells (PSCs). Herein, we report a robust route that simultaneously allows defect passivation and reduced energy difference between perovskite and hole transport layer (HTL) via the judicious placement of polar chlorine‐terminated silane molecules at the interface. Density functional theory (DFT) points to effective passivation of the halide vacancies on perovskite surface by the silane chlorine atoms. An integrated experimental and DFT study demonstrates that the dipole layer formed by the silane molecules decreases the perovskite work function, imparting an Ohmic character to the perovskite/HTL contact. The corresponding PSCs manifest a nearly 20 % increase in power conversion efficiency over pristine devices and a markedly enhanced device stability. As such, the use of polar molecules to passivate defects and tailor the IEA in PSCs presents a promising platform to advance the performance of PSCs. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Materials)
    Abstract The ever‐increasing demand for clean sustainable energy has driven tremendous worldwide investment in the design and exploration of new active materials for energy conversion and energy‐storage devices. Tailoring the surfaces of and interfaces between different materials is one of the surest and best studied paths to enable high‐energy‐density batteries and high‐efficiency solar cells. Metal‐halide perovskite solar cells (PSCs) are one of the most promising photovoltaic materials due to their unprecedented development, with their record power conversion efficiency (PCE) rocketing beyond 25% in less than 10 years. Such progress is achieved largely through the control of crystallinity and surface/interface defects. Rechargeable batteries (RBs) reversibly convert electrical and chemical potential energy through redox reactions at the interfaces between the electrodes and electrolyte. The (electro)chemical and optoelectronic compatibility between active components are essential design considerations to optimize power conversion and energy storage performance. A focused discussion and critical analysis on the formation and functions of the interfaces and interphases of the active materials in these devices is provided, and prospective strategies used to overcome current challenges are described. These strategies revolve around manipulating the chemical compositions, defects, stability, and passivation of the various interfaces of RBs and PSCs. 
    more » « less
  3. ; ; ; ; ; ; ; ; (, Advanced Materials)
    Abstract Typical lead‐based perovskites solar cells show an onset of photogeneration around 800 nm, leaving plenty of spectral loss in the near‐infrared (NIR). Extending light absorption beyond 800 nm into the NIR should increase photocurrent generation and further improve photovoltaic efficiency of perovskite solar cells (PSCs). Here, a simple and facile approach is reported to incorporate a NIR‐chromophore that is also a Lewis‐base into perovskite absorbers to broaden their photoresponse and increase their photovoltaic efficiency. Compared with pristine PSCs without such an organic chromophore, these solar cells generate photocurrent in the NIR beyond the band edge of the perovskite active layer alone. Given the Lewis‐basic nature of the organic semiconductor, its addition to the photoactive layer also effectively passivates perovskite defects. These films thus exhibit significantly reduced trap densities, enhanced hole and electron mobilities, and suppressed illumination‐induced ion migration. As a consequence, perovskite solar cells with organic chromophore exhibit an enhanced efficiency of 21.6%, and substantively improved operational stability under continuous one‐sun illumination. The results demonstrate the potential generalizability of directly incorporating a multifunctional organic semiconductor that both extends light absorption and passivates surface traps in perovskite active layers to yield highly efficient and stable NIR‐harvesting PSCs. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Energy Materials)
    Abstract The optimal selection of alkyl chains and halogen ions in ammonium salts for addressing specific defect types in perovskite films remains unclear, although ammonium salts emerged as a promising strategy to enhance the performance of perovskite solar cells (PSCs). Herein, four ammonium salts are introduced with different alkyl chain types and halogen ions to passivate perovskite films. Branched‐alkyl chain ammonium salts exhibited superior passivation effects compared to linear‐alkyl chain salts, with the alkyl chain structure having a more significant impact on device performance than the halogen ion component. In addition, DFT calculations are performed to investigate which defect types in perovskite films are most effectively passivated by different alkyl chain types and halogen ions in ammonium salts. Branched‐alkyl chain ammonium salts demonstrated superior passivation effects on VPband VFAdefects in perovskite films compared to linear‐alkyl chain salts, while exhibiting similar passivation effects for VIdefects. PSCs passivated with tert‐OAI achieved an impressive efficiency of 25.49%, with a Vocof 1.19 V, a Jscof 25.40 mA cm−2, and an FF of 84.34%. This work highlights a targeted ammonium salt passivation strategy tailored to address different defect types in perovskite films, accounting for variations in perovskite composition and fabrication environments. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Energy Materials)
    Abstract Poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is a popular hole transport material in perovskite solar cells (PSCs). However, the devices with PEDOT:PSS exhibit large open‐circuit voltage (Voc) loss and low efficiency, which is attributed to mismatched energy level alignment and the poor interface of PEDOT:PSS and perovskite. Here, three polymer analogues to polyaniline (PANI), PANI–carbazole (P1), PANI–phenoxazine (P2), and PANI–phenothiazine (P3) are designed with different energy levels to modify the interface between PEDOT:PSS and the perovskite layer and improve the device performance. The effects of the polymers on the device performance are demonstrated by evaluating the work function adjustment, perovskite growth control, and interface modification in MAPbI3‐based PSCs. Low bandgap Sn–Pb‐based PSCs are also fabricated to confirm the effects of the polymers. Three effects are evaluated through the comparison study of PEDOT:PSS‐based organic solar cells and MAPbI3 PSCs based on the PEDOT:PSS modified by P1, P2, and P3. The order of contribution for the three effects is work function adjustment > surface modification > perovskite growth control. MAPbI3 PSCs modified with P2 exhibit a highVocof 1.13 V and a high‐power conversion efficiency of 21.06%. This work provides the fundamental understanding of the interface passivation effects for PEDOT:PSS‐based optoelectronic devices. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email