skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Grain Boundary Tuning Determines Iodide and Lithium-Ion Migration in a Solid Adiponitrile-LiI Molecular Crystal Electrolyte

This content will become publicly available on May 16, 2026

Title: Grain Boundary Tuning Determines Iodide and Lithium-Ion Migration in a Solid Adiponitrile-LiI Molecular Crystal Electrolyte
This work presents the synthesis of a molecular crystal of adiponitrile (Adpn) and LiI via a simple melting method. The molecular crystal has both Li+ and I- channels and can be either a Li+ or I- conductor. In the stoichiomnetric crystal (Adpn)2LiI, the Li+ ions interact only with four C≡N groups of Adpn while the I- ions are uncoordinated. Ab initio calculations indicate that the activation energy for ion hopping is less for the I- (Ea = 60 kJ/mol) than for the Li+ (Ea = 93 kJ/mol) ions, and is predominantly an I- conductor, with a lithium-ion transference number (t_Li^+) of t_Li^+ = 0.15, no lithium plating/stripping observed in the cyclic voltammograms (CVs), and a conductivity of σ = 10-4 S/cm at 30 oC. With the addition of excess adiponitrile, which resides in the grain boundaries between the crystal grains, the contribution of Li+ ions to the conductivity increases, so that for the nonstoichiometric molecular crystal (Adpn)3LiI, Li↔ Li^+ redox reactions are observed in the CVs, t_Li^+ = 0.63, conductivity increases to σ = 10-3 S/cm 30 0C, the voltage stability window is 4V, and it is thermally stable to 130 o.C, showcasing the potential of this electrolyte for advanced solid-state Li-I battery applications. The solid (Adpn)3LiI minimizes migration of polyiodides, inhibiting the “shuttle” effect.  more » « less
Award ID(s):
2138432
PAR ID:
10595662
Author(s) / Creator(s):
; ; ; ;
Publisher / Repository:
ChemRxiv
Date Published:
Format(s):
Medium: X
Institution:
Temple University
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; (, Nature Materials)
    Vincent Dusastre (Ed.)
    Alternative solid-electrolytes are the next key step in advancing lithium batteries with better thermal and chemical stability. A soft-solid electrolyte (Adpn)2LiPF6 (Adpn = adiponitrile) is synthesized and characterized, which exhibits high thermal and electrochemical stability and good ionic conductivity, overcoming several limitations of conventional organic and ceramic materials. The surface of the electrolyte possesses a liquid nano-layer of Adpn that links grains for a facile ionic conduction without high pressure/temperature treatments. Further, the material can quickly self-heal if fractured and provides liquid-like conduction paths via the grain boundaries. A significantly high ion conductivity (~ 10-4 S/cm) and lithium-ion transference number (0.54) are obtained due to weak interactions between “hard” (charge-dense) Li+ ions and “soft” (electronically polarizable) -C≡N group of Adpn. Molecular simulations predict that Li+ ions migrate at the co-crystal grain boundaries with a (preferentially) lower Ea and within the interstitial regions between the co-crystals with higher Ea, where the bulk conductivity comprises a smaller but extant contribution. These cocrystals establish a special concept of crystal design to increase the thermal stability of LiPF6 by separating ions in Adpn solvent matrix, and also exhibit a unique mechanism of ion-conduction via low-resistance grain-boundaries, which is contrasting to ceramics or gel-electrolytes. 
    more » « less
  2. ; ; (, Advanced Energy Materials)
    Abstract Insights into structure‐conductivity mechanisms are investigated for a series of six (dinitrile)2LiPF6 molecular crystals with varied alkyl chain lengths, N≡C─(CH2)n─C≡N, n  = 2, 3, 4, 5, 6, and 2Me‐glutaronitrile. The molecular crystals have separate Li+ and channels, with the Li+ions weakly coordinated by four ─C≡N groups. The following correlations are observed: i) shorter Li+⋯ Li+ hopping distances (5.72–8.08 Å) increase ionic conductivity (3.1 × 10−4–0.15 × 10−4 S cm−1 at 25 °C) for all (dinitrile)2LiPF6; ii) when there are unrestricted anion channels, the lithium ion transference number increases ( = 0.39–0.62) as the void volume (565–250 Å3) and Li+⋯ Li+ hopping distance (7.15–5.72 Å) decrease, since a greater fraction of the charge is contributed by the Li+ions; this correlates with n= 2, 4, 5, 6; iii) the exceptions are Gln (n  = 3) and 2Me‐Gln, where there are restricted channels for anion migration, and in this case: iv) conductivity decreases (0.57–0.15 × 10−4 S cm−1 at 25 °C), since contributions to the conductivity from anion migration decrease, but v) increases (0.64–0.7) since a greater fraction of the charge is carried by the Li+ ions. 
    more » « less
  3. ; ; ; ; ; (, AIChE Journal)
    Abstract Many next‐generation materials for Li‐ion batteries are limited by material instabilities. To stabilize these materials, ultrathin, protective coatings are needed that conduct both lithium ions and electrons. Here, we demonstrate a hybrid chemistry combining molecular layer deposition (MLD) of trimethylaluminum (TMA) and p‐hydroquinone (HQ) with oxidative molecular layer deposition (oMLD) of molybdenum pentachloride (MoCl5) and HQ to enable vapor‐phase molecular layer growth of poly(p‐hydroquinone) (PHQ)—a mixed electron and lithium ion conducting polymer. We employ quartz crystal microbalance (QCM) studies to understand the chemical mechanism and demonstrate controlled linear growth with a 0.5 nm/cycle growth rate. Spectroscopic characterization indicates that this hybrid MLD/oMLD chemistry polymerizes surface HQ monomers from the TMA‐HQ chemistry to produce PHQ. The polymerization to PHQ improves air stability over MLD TMA‐HQ films without crosslinking. Electrochemical measurements on hybrid MLD/oMLD films indicate electronic conductivity of ~10−9 S/cm and a Li‐ion conductivity of ~10−4 S/cm. While these coatings show promise for Li‐ion battery applications, this work focuses on establishing the coating chemistry and future studies are needed to examine the stability, structure, and cycling performance of these coatings in full Li‐ion cells. 
    more » « less
  4. ; ; ; (, Journal of Materials Chemistry A)
    Amorphous Li 3 PS 4 (LPS) solid-state electrolytes are promising for energy-dense lithium metal batteries. LPS glass, synthesized from a 3 : 1 mol ratio of Li 2 S and P 2 S 5 , has high ionic conductivity and can be synthesized by ball milling or solution processing. Ball milling has been attractive because it provides the easiest route to access amorphous LPS with a conductivity of 3.5 × 10 −4 S cm −1 (20 °C). However, achieving the complete reaction of precursors via ball milling can be difficult, and most literature reports use X-ray diffraction (XRD) or Raman spectroscopy to confirm sample purity, both of which have limitations. Furthermore, the effect of residual precursors on ionic conductivity and lithium metal cycling is unknown. In this work, we illustrate the importance of multimodal characterization to determine LPS phase and chemical purity. To determine the residual Li 2 S content in LPS, we show that (1) XRD and 31 P solid state nuclear magnetic resonance (ssNMR) are insufficient and (2) Raman loses sensitivity at concentrations below 12 mol% Li 2 S. Most importantly, we show that 7 Li ssNMR is highly sensitive. Using 7 Li ssNMR, we investigate the effect of ball milling parameters and develop a robust and highly reproducible procedure for pure LPS synthesis. We find that as the residual Li 2 S precursor content increases, LPS conductivity decreases and lithium metal batteries exhibit higher overpotentials and poor cycle life. Our work reveals the importance of multimodal characterization techniques for amorphous solid-state electrolyte characterization and will enable better synthetic strategies for highly conductive electrolytes for efficient energy-dense solid-state lithium metal batteries. 
    more » « less
  5. ; ; ; ; ; ; ; (, Proceedings of the National Academy of Sciences)
    Flexible and low-cost poly(ethylene oxide) (PEO)-based electrolytes are promising for all-solid-state Li-metal batteries because of their compatibility with a metallic lithium anode. However, the low room-temperature Li-ion conductivity of PEO solid electrolytes and severe lithium-dendrite growth limit their application in high-energy Li-metal batteries. Here we prepared a PEO/perovskite Li 3/8 Sr 7/16 Ta 3/4 Zr 1/4 O 3 composite electrolyte with a Li-ion conductivity of 5.4 × 10 −5 and 3.5 × 10 −4 S cm −1 at 25 and 45 °C, respectively; the strong interaction between the F − of TFSI − (bis-trifluoromethanesulfonimide) and the surface Ta 5+ of the perovskite improves the Li-ion transport at the PEO/perovskite interface. A symmetric Li/composite electrolyte/Li cell shows an excellent cyclability at a high current density up to 0.6 mA cm −2 . A solid electrolyte interphase layer formed in situ between the metallic lithium anode and the composite electrolyte suppresses lithium-dendrite formation and growth. All-solid-state Li|LiFePO 4 and high-voltage Li|LiNi 0.8 Mn 0.1 Co 0.1 O 2 batteries with the composite electrolyte have an impressive performance with high Coulombic efficiencies, small overpotentials, and good cycling stability. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email