An official website of the United States government
Future wireless networks could benefit from the energy-efficient, low-latency, and scalable deployments that Reconfigurable Intelligent Surfaces (RISs) offer. However, the creation of an effective low overhead channel estimate technique is a major obstacle in RIS-assisted systems, especially given the high number of RIS components and intrinsic hardware constraints. This research examines the uplink of a RIS-empowered multi-user MIMO communication system and presents a novel semi-blind channel estimate approach. Unlike current approaches, which rely on pilot-based channel estimation, our methodology uses data to estimate channels, considerably enhancing the achievable rate. We provide a closed-form deterministic expression for the uplink achievable rate in actual settings where the channel state information (CSI) must be estimated rather than assumed perfect. The results of the simulations show that the formula obtained is accurate, with a close alignment between the deterministic and actual achievable rates (generally between 2 5% deviations). The proposed approach outperforms traditional approaches, resulting in rate increases of up to 35–40%, especially in instances with more RIS elements. These findings illustrate RIS technology's tremendous potential to improve system capacity and coverage, providing useful insights for optimizing RIS adoption in future wireless networks.
more »
« less
This content will become publicly available on February 5, 2026
Tight Approximation of Achievable Rates in RIS-Based Multi-User MIMO Systems Under Channel Estimation Constraints
The rapid and low-power configuration capabilities of Reconfigurable Intelligent Surfaces (RISs) have made them an attractive option for future wireless networks in terms of energy efficiency. They have the ability to greatly increase connection and facilitate low-latency communications. However, because RIS-based systems often have a large number of RIS unit elements and unique hardware constraints, accurate and low-overhead channel estimate remains a crucial challenge. In this study, we offer a channel estimation framework and concentrate on the uplink of a multi-user multiple-input multiple-output (MU-MIMO) communication system driven by RIS. Our primary goal is to enhance the achievable rate and system capacity. We derive a closed-form deterministic expression for the uplink achievable rate under practical scenarios where channel state information (CSI) is not directly known and must be estimated. In contrast to previous studies assuming perfect CSI, our approach incorporates the channel estimation process, leading to a more realistic performance assessment. Extensive simulations validate the tightness of our derived expression compared to the actual achievable rate across various system parameters (with discrepancies typically within 2-5%). The results highlight the significant impact of RIS on system performance enhancement, even with imperfect CSI. Our findings provide crucial insights into the deployment and optimization of RIS-assisted multi-user wireless networks, underscoring their potential for substantial improvements in rate and capacity.
more »
« less
- Award ID(s):
- 2210252
- PAR ID:
- 10596136
- Publisher / Repository:
- IEEE
- Date Published:
- Journal Name:
- IEEE Open Journal of the Communications Society
- Volume:
- 6
- ISSN:
- 2644-125X
- Page Range / eLocation ID:
- 1299-1327
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Reconfigurable intelligent surface (RIS) technology can enhance the performance of wireless systems, but an ad-versary can use such technology to deteriorate communication links. This paper explores an RIS-based attack on multi-user wireless systems that require channel reciprocity for time-division duplexing (TDD). We demonstrate that deploying an RIS with a non-diagonal phase shift matrix can compromise channel reciprocity and lead to poor TDD performance. The attack can be achieved without transmission of signal energy, without channel state information (CSI), and without synchronization with the legitimate system, and thus it is difficult to detect and counteract. We provide an extensive set of simulation studies on the impact of such an attack on the achievable sum rate of the legitimate system, and we design a heuristic algorithm for optimizing the attack in cases where some partial knowledge of the CSI is available. Our results demonstrate that this channel reciprocity attack can significantly degrade the performance of the legitimate system.more » « less
-
Multiple-input multiple-outputs (MIMO) systems are integral to the implementation of the current fifth-generation (5G) and beyond wireless networks. Accurate channel state information (CSI) is imperative to a MIMO system for its optimal performance. In this work, we develop an end-to-end software evaluation platform for the channel estimation process in a MIMO system. With this platform, different channel estimation and reconstruction processes, as well as precoding methods can be implemented and evaluated. Channel reconstruction error and transmission bit error rate are chosen metrics in the current implementation. Direct channel estimation with the least square method, and CSI feedback methods with compressive sensing and deep-learning approaches are tested to demonstrate the evaluation platformmore » « less
-
In this work, we develop a two time-scale deep learning approach for beamforming and phase shift (BF-PS) design in time-varying RIS-aided networks. In contrast to most existing works that assume perfect CSI for BF-PS design, we take into account the cost of channel estimation and utilize Long Short-Term Memory (LSTM) networks to design BF-PS from limited samples of estimated channel CSI. An LSTM channel extrapolator is designed first to generate high resolution estimates of the cascaded BS-RIS-user channel from sampled signals acquired at a slow time scale. Subsequently, the outputs of the channel extrapolator are fed into an LSTM-based two stage neural network for the joint design of BF-PS at a fast time scale of per coherence time. To address the critical issue that training overhead increases linearly with the number of RIS elements, we consider various pilot structures and sampling patterns in time and space to evaluate the efficiency and sum-rate performance of the proposed two time-scale design. Our results show that the proposed two time-scale design can achieve good spectral efficiency when taking into account the pilot overhead required for training. The proposed design also outperforms a direct BF-PS design that does not employ a channel extrapolator. These demonstrate the feasibility of applying RIS in time-varying channels with reasonable pilot overhead.more » « less
-
While reconfigurable intelligent surface (RIS) technology shows great promise for wireless communication, an adversary using such technology can threaten wireless performance. This paper explores an RIS-based attack on time-division duplex (TDD) based wireless systems that use channel reciprocity for physical layer key generation (PLKG). We demonstrate that deploying a non-reciprocal RIS with a non-symmetric "beyond diagonal" (BD) phase shift matrix can compromise channel reciprocity and thus break key consistency. The attack can be achieved without transmission of signal energy, channel state information (CSI), and synchronization with the legitimate system, and thus it is difficult to detect and counteract. We propose a physically consistent BD-RIS model and verify the impact of its attack on the secret key rate (SKR) of the legitimate system via simulations. Moreover, we provide a heuristic approach for optimizing the BD-RIS configuration to realize a more severe attack in cases where some partial knowledge of the channel state information is available. Our results demonstrate that such channel reciprocity attacks can significantly decrease the SKR of the legitimate system.more » « less
