An official website of the United States government
The environmental impact of battery electric vehicles (BEVs) largely depends on the environmental profile of the national electric power grid that enables their operation. The purpose of this study is to analyze the environmental performance of BEV usage in Korea considering the changes and trajectory of the national power roadmap. We examined the environmental performance using a weighted environmental index, considering eight impact categories. The results showed that the weighted environmental impact of Korea’s national power grid supply would increase overall by 66% from 2015 to 2029 using the plan laid out by the 7th Power Roadmap, and by only 33% from 2017 to 2031 using the 8th Power Roadmap plan. This change reflects the substantial amount of renewables in the more recent power mix plan. In 2016, BEV usage in Korea resulted in emissions reductions of about 37% compared with diesel passenger vehicles, and 41% compared with gasoline vehicles per kilometer driven (100 g CO2e/km versus 158 g and 170 g CO2e/km, respectively) related to transportation sector. By 2030, BEV usage in Korea is expected to achieve a greater emissions reduction of about 53% compared with diesel vehicles and 56% compared with gasoline vehicles. However, trade-offs are also expected because of increased particulate matter (PM) pollution, which we anticipate to increase by 84% compared with 2016 conditions. Despite these projected increases in PM emissions, increased BEV usage in Korea is expected to result in important global and local benefits through reductions of climate-changing greenhouse gas (GHG) emissions.
more »
« less
This content will become publicly available on July 1, 2026
The impacts of improving heavy-duty internal combustion engine technology on reducing NOx emissions inventories going into the future
In an effort to reduce nitrogen oxide (NOx) emissions and other pollutants from heavy-duty vehicles (HDVs), regulators have been implementing more stringent regulations that have included a combination of significantly more stringent emissions standards with the introduction of battery electric vehicles (BEVs). This study analyzed in-use NOx emissions data from 63 HDVs across various vocations, model years, and engine technologies/fuels to assess which current technologies offer a realistic path toward reducing NOx emissions without significantly burdening fleet operators or electrical infrastructure. All 63 HDVs were equipped with portable emissions measurement systems when they were tested for in-use NOx emissions during their routine operation on California roadways. The data was analyzed using the moving average window method proposed by the Environmental Protection Agency (EPA) in which the in-use emissions are broken up into two bins dependent on the engine load: ≤6 % (idle) and >6 % of maximum rated power. It was found that diesel engines manufactured after 2020 and natural gas engines certified to the 0.02 g/bhp-h NOx standard met the 2027 and 2035 EPA in-use NOx standards for both bins even though the future standards do not apply to these older engines. In addition, over an 80 % reduction in average NOx emissions is seen in both bins and fuels as modern NOx and greenhouse gas standards were implemented in 2017. With the implementation of ultralow NOx diesel technology engines, capable of meeting 0.035 g/bhp-h NOx limits, it was found that reductions in the NOx emissions inventories from 90.0 to 91.9 % could be achieved by 2050, depending on the deployment of BEVs. In conclusion, current and upcoming engine technologies can serve as benchmark powertrain solutions for emissions inventory reductions in the near and intermediate terms solutions even to the extent that the transition to battery electric HDVs becomes more gradual.
more »
« less
- Award ID(s):
- 2152258
- PAR ID:
- 10599532
- Publisher / Repository:
- Elsevier
- Date Published:
- Journal Name:
- Science of The Total Environment
- Volume:
- 986
- Issue:
- C
- ISSN:
- 0048-9697
- Page Range / eLocation ID:
- 179781
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Battery electric vehicles (BEVs) have emerged as a promising alternative to traditional internal combustion engine (ICE) vehicles due to benefits in improved fuel economy, lower operating cost, and reduced emission. BEVs use electric motors rather than fossil fuels for propulsion and typically store electric energy in lithium-ion cells. With rising concerns over fossil fuel depletion and the impact of ICE vehicles on the climate, electric mobility is widely considered as the future of sustainable transportation. BEVs promise to drastically reduce greenhouse gas emissions as a result of the transportation sector. However, mass adoption of BEVs faces major barriers due to consumer worries over several important battery-related issues, such as limited range, long charging time, lack of charging stations, and high initial cost. Existing solutions to overcome these barriers, such as building more charging stations, increasing battery capacity, and stationary vehicle-to-vehicle (V2V) charging, often suffer from prohibitive investment costs, incompatibility to existing BEVs, or long travel delays. In this paper, we propose P eer-to- P eer C ar C harging (P2C2), a scalable approach for charging BEVs that alleviates the need for elaborate charging infrastructure. The central idea is to enable BEVs to share charge among each other while in motion through coordination with a cloud-based control system. To re-vitalize a BEV fleet, which is continuously in motion, we introduce Mobile Charging Stations (MoCS), which are high-battery-capacity vehicles used to replenish the overall charge in a vehicle network. Unlike existing V2V charging solutions, the charge sharing in P2C2 takes place while the BEVs are in-motion, which aims at minimizing travel time loss. To reduce BEV-to-BEV contact time without increasing manufacturing costs, we propose to use multiple batteries of varying sizes and charge transfer rates. The faster but smaller batteries are used for charge transfer between vehicles, while the slower but larger ones are used for prolonged charge storage. We have designed the overall P2C2 framework and formalized the decision-making process of the cloud-based control system. We have evaluated the effectiveness of P2C2 using a well-characterized simulation platform and observed dramatic improvement in BEV mobility. Additionally, through statistical analysis, we show that a significant reduction in carbon emission is also possible if MoCS can be powered by renewable energy sources.more » « less
-
This research analyzed the real-world NOx and particle number (PN) emissions of 21 China VI heavy-duty diesel trucks (HDDTs). On-road emission conformity was first evaluated with portable emission measurement system (PEMS). Only 76.19 %, 71.43 % and 61.90 % of the vehicles passed the NOx test, PN test and both tests, respectively. The impacts of vehicle features including exhaust gas recirculation (EGR) equipment, mileage and tractive tonnage were then assessed. Results demonstrated that EGR helped reducing NOx emission factors (EFs) while increased PN EFs. Larger mileages and tractive tonnages corresponded to higher NOx and PN EFs, respectively. In-depth analyses regarding the influences of operating conditions on emissions were conducted with both numerical comparisons and statistical tests. Results proved that HDDTs generated higher NOx EFs under low speeds or large vehicle specific powers (VSPs), and higher PN EFs under high speeds or small VSPs in general. In addition, unqualified vehicles generated significantly higher NOx EFs than qualified vehicles on freeways or under speed≥40 km/h, while significant higher PN EFs were generated on suburban roads, freeways or under operating modes with positive VSPs by unqualified vehicles. The reliability and accuracy of on-board diagnostic (OBD) NOx data were finally investigated. Results revealed that 43 % of the test vehicles did not report reliable OBD data. Correlation analyses between OBD NOx and PEMS measurements further demonstrated that the consistency of instantaneous concentrations were generally low. However, sliding window averaged concentrations show better correlations, e.g., the Pearson correlation coefficients on 20s-window averaged concentrations exceeded 0.85 for most vehicles. The research results provide valuable insights into emission regulation, e.g., focusing more on medium- to high-speed operations to identify unqualified vehicles, setting higher standards to improve the quality of OBD data, and adopting window averaged OBD NOx concentrations in evaluating vehicle emission performance.more » « less
-
Abstract Diesel-fueled engines still hold a large market share in the medium and heavy-duty transportation sector. However, the increase in fossil fuel prices and the strict emission regulations are leading engine manufacturers to seek cleaner alternatives without a compromise in performance. Alcohol-based fuels, such as ethanol, offer a promising alternative to diesel fuel in meeting regulatory demands. Ethanol provides cleaner combustion and lower levels of soot due to its chemical properties, in particular its lower level of carbon content. In addition, the stoichiometric operating conditions of alcohol fueled engines enable the mitigation of NOx emissions in aftertreatment stage. With the promise of retrofitting diesel engines to run on ethanol to reduce emissions, the thermal efficiency of these engines remains the primary optimization target. In order to find the optimal ethanol-fueled engine design that maximizes the thermal efficiency, a large design space needs to be investigated using engineering tools. In this study, previous research by the authors on optimizing the design of a single-cylinder ethanol-fueled engine was extended to explore the design space for a heavy-duty multi-cylinder engine configuration. A heavy-duty engine setup with multiple operating conditions at different engine speeds and loads were considered. A design optimization analysis was performed to identify the potential designs that maximize the indicated thermal efficiency in an ethanol-fueled compression ignition engine. First, a computational fluid dynamics (CFD) model of the engine was validated using experimental data for four drive cycle points. Using a design of experiments (DoE) approach and a parameterized piston bowl geometry, the model was then exercised to explore the relationship among geometric features of the piston bowl and spray targeting angle and indicated thermal efficiency across all tested operating conditions. After evaluating 165 candidate designs, a piston bowl geometry was identified that yielded an increase between 1.3 to 2.2 percentage points in indicated thermal efficiency for all tested conditions, while satisfying the operational design constraints for peak pressure and maximum pressure rise rate. The increased performance was attributed to enhanced mixing that led to the formation of a more homogeneous distribution of in-cylinder temperature and equivalence ratio, higher combustion temperatures, and shorter combustion duration. Finally, a Bayesian optimization (BOpt) analysis was employed to find the optimal piston bowl geometry with a fixed spray injector angle for one of the operating conditions. Using BOpt, a piston candidate was identified that resulted in a 1.9 percentage point increase in thermal efficiency from the baseline design, yet only required 65% of the design samples investigated using the DoE approach.more » « less
-
Abstract Heavy-duty vehicles (HDVs) disproportionately contribute to the creation of air pollutants and emission of greenhouse gases—with marginalized populations unequally burdened by the impacts of each. Shifting to non-emitting technologies, such as electric HDVs (eHDVs), is underway; however, the associated air quality and health implications have not been resolved at equity-relevant scales. Here we use a neighbourhood-scale (~1 km) air quality model to evaluate air pollution, public health and equity implications of a 30% transition of predominantly diesel HDVs to eHDVs over the region surrounding North America’s largest freight hub, Chicago, IL. We find decreases in nitrogen dioxide (NO2) and fine particulate matter (PM2.5) concentrations but ozone (O3) increases, particularly in urban settings. Over our simulation domain NO2and PM2.5reductions translate to ~590 (95% confidence interval (CI) 150–900) and ~70 (95% CI 20–110) avoided premature deaths per year, respectively, while O3increases add ~50 (95% CI 30–110) deaths per year. The largest pollutant and health benefits simulated are within communities with higher proportions of Black and Hispanic/Latino residents, highlighting the potential for eHDVs to reduce disproportionate and unjust air pollution and associated air-pollution attributable health burdens within historically marginalized populations.more » « less
