An official website of the United States government
In this paper a model for viscous boundary and shear layers in three dimensions is introduced and termed a vortex-entrainment sheet. The vorticity in the layer is accounted for by a conventional vortex sheet. The mass and momentum in the layer are represented by a two-dimensional surface having its own internal tangential flow. Namely, the sheet has a mass density per-unit-area making it dynamically distinct from the surrounding outer fluid and allowing the sheet to support a pressure jump. The mechanism of entrainment is represented by a discontinuity in the normal component of the velocity across the sheet. The velocity field induced by the vortex-entrainment sheet is given by a generalized Birkhoff–Rott equation with a complex sheet strength. The model was applied to the case of separation at a sharp edge. No supplementary Kutta condition in the form of a singularity removal is required as the flow remains bounded through an appropriate balance of normal momentum with the pressure jump across the sheet. A pressure jump at the edge results in the generation of new vorticity. The shedding angle is dictated by the normal impulse of the intrinsic flow inside the bound sheets as they merge to form the free sheet. When there is zero entrainment everywhere the model reduces to the conventional vortex sheet with no mass. Consequently, the pressure jump must be zero and the shedding angle must be tangential so that the sheet simply convects off the wedge face. Lastly, the vortex-entrainment sheet model is demonstrated on several example problems.
more »
« less
An Impulse Ghost Fluid Method for Simulating Two-Phase Flows
This paper introduces a two-phase interfacial fluid model based on the impulse variable to capture complex vorticity-interface interactions. Our key idea is to leverage bidirectional flow map theory to enhance the transport accuracy of both vorticity and interfaces simultaneously and address their coupling within a unified Eulerian framework. At the heart of our framework is an impulse ghost fluid method to solve the two-phase incompressible fluid characterized by its interfacial dynamics. To deal with the history-dependent jump of gauge variables across a dynamic interface, we develop a novel path integral formula empowered by spatiotemporal buffers to convert the history-dependent jump condition into a geometry-dependent jump condition when projecting impulse to velocity. We demonstrate the efficacy of our approach in simulating and visualizing several interface-vorticity interaction problems with cross-phase vortical evolution, including interfacial whirlpool, vortex ring reflection, and leapfrogging bubble rings.
more »
« less
- Award ID(s):
- 2420319
- PAR ID:
- 10604560
- Publisher / Repository:
- Association for Computing Machinery (ACM)
- Date Published:
- Journal Name:
- ACM Transactions on Graphics
- Volume:
- 43
- Issue:
- 6
- ISSN:
- 0730-0301
- Format(s):
- Medium: X Size: p. 1-12
- Size(s):
- p. 1-12
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
We propose a novel solid-fluid interaction method for coupling elastic solids with impulse flow maps. Our key idea is to unify the representation of fluid and solid components as particle flow maps with different lengths and dynamics. The solid-fluid coupling is enabled by implementing two novel mechanisms: first, we developed an impulse-to-velocity transfer mechanism to unify the exchanged physical quantities; second, we devised a particle path integral mechanism to accumulate coupling forces along each flow-map trajectory. Our framework integrates these two mechanisms into an Eulerian-Lagrangian impulse fluid simulator to accommodate traditional coupling models, exemplified by the Material Point Method (MPM) and Immersed Boundary Method (IBM), within a particle flow map framework. We demonstrate our method's efficacy by simulating solid-fluid interactions exhibiting strong vortical dynamics, including various vortex shedding and interaction examples across swimming, falling, breezing, and combustion.more » « less
-
In fluid dynamics applications that involve flow adjacent to a porous medium, there exists some ambiguity in how to model the interface. Despite different developments, there is no agreed upon boundary condition that should be applied at the interface. We present a new analytical solution for laminar boundary layers over permeable beds driven by oscillatory free stream motion where flow in the permeable region follows Darcy's law. We study the fluid boundary layer for two different boundary conditions at the interface between the fluid and a permeable bed that was first introduced in the context of steady flows: a mixed boundary condition proposed by Beavers and Joseph [“Boundary conditions at a naturally permeable bed,” J. Fluid Mech. 30, 197–207 (1967)] and the velocity continuity condition proposed by Le Bars and Worster [“Interfacial conditions between a pure fluid and a porous medium: Implications for binary alloy solidification,” J. Fluid Mech. 550, 149–173 (2006)]. Our analytical solution based on the velocity continuity condition agrees very well with numerical results using the mixed boundary condition, suggesting that the simpler velocity boundary condition is able to accurately capture the flow physics near the interface. Furthermore, we compare our solution against experimental data in an oscillatory boundary layer generated by water waves propagating over a permeable bed and find good agreement. Our results show the existence of a transition zone below the interface, where the boundary layer flow still dominates. The depth of this transition zone scales with the grain diameter of the porous medium and is proportional to an empirical parameter that we fit to the available data.more » « less
-
null (Ed.)We present a quasi-incompressible Navier–Stokes–Cahn–Hilliard (q-NSCH) diffuse interface model for two-phase fluid flows with variable physical properties that maintains thermodynamic consistency. Then, we couple the diffuse domain method with this two-phase fluid model – yielding a new q-NSCH-DD model – to simulate the two-phase flows with moving contact lines in complex geometries. The original complex domain is extended to a larger regular domain, usually a cuboid, and the complex domain boundary is replaced by an interfacial region with finite thickness. A phase-field function is introduced to approximate the characteristic function of the original domain of interest. The original fluid model, q-NSCH, is reformulated on the larger domain with additional source terms that approximate the boundary conditions on the solid surface. We show that the q-NSCH-DD system converges to the q-NSCH system asymptotically as the thickness of the diffuse domain interface introduced by the phase-field function shrinks to zero ( $$\epsilon \rightarrow 0$$ ) with $$\mathcal {O}(\epsilon )$$ . Our analytic results are confirmed numerically by measuring the errors in both $$L^{2}$$ and $$L^{\infty }$$ norms. In addition, we show that the q-NSCH-DD system not only allows the contact line to move on curved boundaries, but also makes the fluid–fluid interface intersect the solid object at an angle that is consistent with the prescribed contact angle.more » « less
-
We propose theVortexParticleFlowMap (VPFM) method to simulate incompressible flow with complex vortical evolution in the presence of dynamic solid boundaries. The core insight of our approach is that vorticity is an ideal quantity for evolution on particle flow maps, enabling significantly longer flow map distances compared to other fluid quantities like velocity or impulse. To achieve this goal, we developed a hybrid Eulerian-Lagrangian representation that evolves vorticity and flow map quantities on vortex particles, while reconstructing velocity on a background grid. The method integrates three key components: (1) a vorticity-based particle flow map framework, (2) an accurate Hessian evolution scheme on particles, and (3) a solid boundary treatment for no-through and no-slip conditions in VPFM. These components collectively allow a substantially longer flow map length (3–12times longer) than the state-of-the-art, enhancing vorticity preservation over extended spatiotemporal domains. We validated the performance of VPFM through diverse simulations, demonstrating its effectiveness in capturing complex vortex dynamics and turbulence phenomena.more » « less
