An official website of the United States government
A total of 5.4 million tons of face masks were generated worldwide annually in 2021. Most of these used masks went to landfills or entered the environment, posing serious risks to wildlife, humans, and ecosystems. In this study, batch low-pressure hydrothermal processing (LP-HTP) methods are developed to convert disposable face masks into oils. Three different materials from face masks were studied to find optimal processing conditions for converting full face masks into oil. The oil and gas yields, as well as oil compositions, depend on the feedstock composition, particle size, and reaction conditions. Yields of 82 wt.% oil, 17 wt.% gas, and minimal char (~1 wt.%) were obtained from full masks. LP-HTP methods for converting face masks have higher oil yields than pyrolysis methods in the literature and have lower operating pressures than supercritical water liquefaction. LP-HTP methods for face masks can increase net energy returns by 3.4 times and reduce GHG emissions by 95% compared to incineration. LP-HTP has the potential to divert 5.4 million tons of waste masks annually from landfills and the environment, producing approximately 4.4 million tons of oil.
more »
« less
Low-pressure hydrothermal processing for conversion of polystyrene into oils
Global polystyrene (PS) waste accumulates at a rate of 28 million tons annually, while recycling rates stay at 1.3 %. PS degrades into microplastics, releasing various chemicals that affect ecosystems and human health. Conventional waste treatment methods are ineffective in reducing PS waste accumulation. This study developed batch low-pressure hydrothermal processing (LP-HTP) methods to convert PS to oils. Oil yields of 96–99 % were obtained with 1–2 % char and up to 2 % gas at average temperatures of 341–424°C for 19–75 minutes. Reversible reactions between monomers (C6-C9) and poly-aromatics (C10-C20+) were found to limit monomer yields. A two-step kinetic model accounting for the reversible reactions was developed. Temperature histories of the batch experiments were considered such that the estimated kinetic parameters were independent of reactor heating or cooling rates. The predicted yields of monomers and poly-aromatics agreed with experimental yields to within 6 %. The model predicted increasing monomer yields with decreasing PS loadings. This predictive model can aid future process optimization and scale-up. PS and polyolefins were co-processed to produce oils with 87 % yields and higher aromatic contents than oils produced from polyolefins alone. LP-HTP methods required no catalyst, had higher oil yields and less char formation than pyrolysis, and used much lower operating pressures and energy than supercritical water liquefaction. The methods also potentially have lower environmental impacts and 4.7 times higher energy recovery than incineration. The oils from LP-HTP, if separated into pure monomers, can be used as chemical feedstocks to achieve a circular use of hydrocarbons.
more »
« less
- Award ID(s):
- 2112554
- PAR ID:
- 10610210
- Publisher / Repository:
- Elsevier
- Date Published:
- Journal Name:
- Journal of Environmental Chemical Engineering
- Volume:
- 12
- Issue:
- 5
- ISSN:
- 2213-3437
- Page Range / eLocation ID:
- 113836
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Subcritical hydrothermal liquefaction uses high temperatures (270-350°C) and high pressures (80-173 bar) to produce bio-crude oils that can be upgraded to liquid transportation fuels. In this study, two strains of Galdieria sulphuraria, an acidophilic, mixotrophic red microalgae, were cultivated on effluent from primary settling tanks at a municipal wastewater treatment plant. Samples were concentrated to 5 and 10 wt.% slurries after harvest and converted by hydrothermal liquefaction in a 1.8 L batch reactor. Reaction conditions included temperatures of 310, 330 and 350°C, and hold times of 5, 30 and 60 minutes. Yields and product properties were compared to those of hydrothermal liquefaction of Galdieria sulphuraria grown on media. Total oil yields were low (11-18 wt.%) and char yields were high (28-36 wt.%) compared to those from HTL of the algae grown on media (27-35 wt.% oil and 10-13 wt.% char), likely due to the higher ash content and lower lipid content of the algae grown on wastewater. The bio-crude oil, char, and aqueous phase samples were characterized to complete mass, energy and nutrient balances to characterize the tradeoffs in the algae growth and conversion systems for energy and nutrient recovery.more » « less
-
Plastic waste represents one of the most urgent environmental challenges facing humankind. Upcycling has been proposed to solve the low profitability and high market sensitivity of known recycling methods. Existing upcycling methods operate under energy-intense conditions and use precious-metal catalysts, but produce low-value oligomers, monomers, and common aromatics. Herein, we report a tandem degradation-upcycling strategy to exploit high-value chemicals from polystyrene (PS) waste with high selectivity. We first degrade PS waste to aromatics using ultraviolet (UV) light and then valorize the intermediate to diphenylmethane. Low-cost AlCl 3 catalyzes both the reactions of degradation and upcycling at ambient temperatures under atmospheric pressure. The degraded intermediates can advantageously serve as solvents for processing the solid plastic wastes, forming a self-sustainable circuitry. The low-value-input and high-value-output approach is thus substantially more sustainable and economically viable than conventional thermal processes, which operate at high-temperature, high-pressure conditions and use precious-metal catalysts, but produce low-value oligomers, monomers, and common aromatics. The cascade strategy is resilient to impurities from plastic waste streams and is generalizable to other high-value chemicals (e.g., benzophenone, 1,2-diphenylethane, and 4-phenyl-4-oxo butyric acid). The upcycling to diphenylmethane was tested at 1-kg laboratory scale and attested by industrial-scale techno-economic analysis, demonstrating sustainability and economic viability without government subsidies or tax credits.more » « less
-
Biofuels produced via thermochemical conversions of waste biomass could be sustainable alternatives to fossil fuels but currently require costly downstream upgrading to be used in existing infrastructure. In this work, we explore how a low-cost, abundant clay mineral, bentonite, could serve as an in situ heterogeneous catalyst for two different thermochemical conversion processes: pyrolysis and hydrothermal carbonization (HTC). Avocado pits were combined with 20 wt% bentonite clay and were pyrolyzed at 600 °C and hydrothermally carbonized at 250 °C, commonly used conditions across the literature. During pyrolysis, bentonite clay promoted Diels–Alder reactions that transformed furans to aromatic compounds, which decreased the bio-oil oxygen content and produced a fuel closer to being suitable for existing infrastructure. The HTC bio-oil without the clay catalyst contained 100% furans, mainly 5-methylfurfural, but in the presence of the clay, approximately 25% of the bio-oil was transformed to 2-methyl-2-cyclopentenone, thereby adding two hydrogen atoms and removing one oxygen. The use of clay in both processes decreased the relative oxygen content of the bio-oils. Proximate analysis of the resulting chars showed an increase in fixed carbon (FC) and a decrease in volatile matter (VM) with clay inclusion. By containing more FC, the HTC-derived char may be more stable than pyrolysis-derived char for environmental applications. The addition of bentonite clay to both processes did not produce significantly different bio-oil yields, such that by adding a clay catalyst, a more valuable bio-oil was produced without reducing the amount of bio-oil recovered.more » « less
-
Identifying plastics capable of chemical recycling to monomer (CRM) is the foremost challenge in creating a sustainable circular plastic economy. Polyacetals are promising candidates for CRM but lack useful tensile strengths owing to the low molecular weights produced using current uncontrolled cationic ring-opening polymerization (CROP) methods. Here, we present reversible-deactivation CROP of cyclic acetals using a commercial halomethyl ether initiator and an indium(III) bromide catalyst. Using this method, we synthesize poly(1,3-dioxolane) (PDXL), which demonstrates tensile strength comparable to some commodity polyolefins. Depolymerization of PDXL using strong acid catalysts returns monomer in near-quantitative yield and even proceeds from a commodity plastic waste mixture. Our efficient polymerization method affords a tough thermoplastic that can undergo selective depolymerization to monomer.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1016/j.jece.2024.113836
