skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.


Title: Using Direct Laboratory Measurements of Electron Temperature Anisotropy to Identify the Heating Mechanism in Electron-Only Guide Field Magnetic Reconnection
Anisotropic electron heating during electron-only magnetic reconnection with a large guide magnetic field is directly measured in a laboratory plasma through in situ measurements of electron velocity distribution functions. Electron heating preferentially parallel to the magnetic field is localized to one separatrix, and anisotropies of 1.5 are measured. The mechanism for electron energization is identified as the parallel reconnection electric field because of the anisotropic nature of the heating and spatial localization. These characteristics are reproduced in a 2D particle-in-cell simulation and are also consistent with numerous magnetosheath observations. A measured increase in the perpendicular temperature along both separatrices is not reproduced by our 2D simulations. This work has implications for energy partition studies in magnetosheath and laboratory reconnection.  more » « less
Award ID(s):
1902111
PAR ID:
10612283
Author(s) / Creator(s):
; ; ; ; ; ;
Publisher / Repository:
Physical Review Letters
Date Published:
Journal Name:
Physical Review Letters
Volume:
131
Issue:
15
ISSN:
0031-9007
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Using incoherent Thomson scattering, electron heating and acceleration at the electron velocity distribution function (EVDF) level are investigated during electron-only reconnection in the PHAse Space MApping (PHASMA) facility. Reconnection arises during the merger of two kink-free flux ropes. Both push and pull type reconnection occur in a single discharge. Electron heating is localized around the separatrix, and the electron temperature increases continuously along the separatrix with distance from the X-line. The local measured gain in enthalpy flux is up to 70% of the incoming Poynting flux. Notably, non-Maxwellian EVDFs comprised of a warm bulk population and a cold beam are directly measured during the electron-only reconnection. The electron beam velocity is comparable to, and scales with, electron Alfvén speed, revealing the signature of electron acceleration caused by electron-only reconnection. The observation of oppositely directed electron beams on either side of the X-point provides “smoking-gun” evidence of the occurrence of electron-only reconnection in PHASMA. 2D particle-in-cell simulations agree well with the laboratory measurements. The measured conversion of Poynting flux into electron enthalpy is consistent with recent observations of electron-only reconnection in the magnetosheath [Phan et al., Nature 557, 202 (2018)] at similar dimensionless parameters as in the experiments. The laboratory measurements go beyond the magnetosheath observations by directly resolving the electron temperature gain. 
    more » « less
  2. Abstract Magnetic reconnection is a fundamental process in space and astrophysical plasmas that converts magnetic energy to particle energy. Recently, a novel kind of reconnection, called electron-only reconnection, has been observed in Earth's magnetosheath plasma. A defining characteristic of electron-only reconnection is that electron jets are observed but ion jets are absent. This is in contrast with traditional ion-coupled reconnection, where both ions and electrons exhibit outflowing velocity jets. Findings from the Magnetospheric Multiscale mission observations and particle-in-cell simulations show clear signatures of electron heating in electron-only reconnection events, while ions are not heated or cooled in these events. This result is unlike ion-coupled reconnection, where both ions and electrons are heated to varying degrees. The ratio of electron to ion dissipation increases with the local magnetic curvature, indicating that the partition of heat into ions and electrons is dependent on the current-sheet thickness. 
    more » « less
  3. Observations in Earth’s turbulent magnetosheath downstream of a quasiparallel bow shock reveal a prevalence of electron-scale current sheets favorable for electron-only reconnection where ions are not coupled to the reconnecting magnetic fields. In small-scale turbulence, magnetic structures associated with intense current sheets are limited in all dimensions. And since the coupling of ions are constrained by a minimum length scale, the dynamics of electron reconnection is likely to be 3D. Here, both 2D and 3D kinetic particle-in-cell simulations are used to investigate electron-only reconnection, focusing on the reconnection rate and associated electron flows. A new form of 3D electron-only reconnection spontaneously develops where the magnetic X-line is localized in the out-of-plane (z) direction. The consequence is an enhancement of the reconnection rate compared with two dimensions, which results from differential mass flux out of the diffusion region along z, enabling a faster inflow velocity and thus a larger reconnection rate. This outflow along z is due to the magnetic tension force in z just as the conventional exhaust tension force, allowing particles to leave the diffusion region efficiently along z unlike the 2D configuration. 
    more » « less
  4. Abstract Electron inflow and outflow velocities during magnetic reconnection at and near the dayside magnetopause are measured using satellites from NASA's Magnetospheric Multiscale (MMS) mission. A case study is examined in detail, and three other events with similar behavior are shown, with one of them being a recently published electron‐only reconnection event in the magnetosheath. The measured inflow speeds of 200–400 km/s imply dimensionless reconnection rates of 0.05–0.25 when normalized to the relevant electron Alfvén speed, which are within the range of expectations. The outflow speeds are about 1.5–3 times the inflow speeds, which is consistent with theoretical predictions of the aspect ratio of the inner electron diffusion region. A reconnection rate of 0.04 ± 25% was obtained for the case study event using the reconnection electric field as compared to the 0.12 ± 20% rate determined from the inflow velocity. 
    more » « less
  5. Magnetic reconnection plays an important role in the release of magnetic energy and consequent energization of particles in collisionless plasmas. Energy transfer in collisionless magnetic reconnection is inherently a two-step process: reversible, collisionless energization of particles by the electric field, followed by collisional thermalization of that energy, leading to irreversible plasma heating. Gyrokinetic numerical simulations are used to explore the first step of electron energization, and we generate the first examples of field–particle correlation signatures of electron energization in 2D strong-guide-field collisionless magnetic reconnection. We determine these velocity space signatures at the x-point and in the exhaust, the regions of the reconnection geometry in which the electron energization primarily occurs. Modeling of these velocity–space signatures shows that, in the strong-guide-field limit, the energization of electrons occurs through bulk acceleration of the out-of-plane electron flow by the parallel electric field that drives the reconnection, a non-resonant mechanism of energization. We explore the variation of these velocity–space signatures over the plasma beta range 0.01≤βi≤1. Our analysis goes beyond the fluid picture of the plasma dynamics and exploits the kinetic features of electron energization in the exhaust region to propose a single-point diagnostic, which can potentially identify a reconnection exhaust region using spacecraft observations. 
    more » « less