An official website of the United States government
Hurricanes can introduce metals into coastal systems. Unfortunately, metal concentrations are unknown in many hurricane prone locations. Here we measured vanadium, chromium, manganese, iron, cobalt, nickel, copper, zinc, arsenic, molybdenum, cadmium, antimony, barium, lead, and uranium in surface water, sediments, and seagrass (Thalassia testudinum) collected in seagrass beds and marinas around The Abacos, The Bahamas in November 2019, May 2020, and June and December 2021 to establish a post-Hurricane Dorian baseline, assess changes post-storm, and understand bioconcentration in seagrass. Metal concentrations were higher in marinas and several increased over time. Also, metal profiles in sediments became more similar over time. Together, these suggest that metals were impacted by Hurricane Dorian and are either returning to pre-storm conditions or increasing due to recovery-related activities. Thalassia testudinum uptakes most metals more readily from surface water than sediments. Therefore, seagrasses may phytoremediate metals, but also transfer metals to higher trophic levels.
more »
« less
Toxic elements in benthic lacustrine sediments of Utah’s Great Salt Lake following a historic low in elevation
Terminal lakes (without outflow) retain elements and compounds that reach them through fluvial, point source or atmospheric deposition. If the lake sediment is exposed, some of these chemicals could become toxic dust particulates. The Great Salt Lake (GSL) in Utah is a terminal lake that experienced record-low lake elevation in 2021-22, exposing vast areas of playa. Here, we used inductively coupled plasma mass spectrometry to analyze the environmental chemistry of GSL shallow sediment during historic lows in spring, summer, and fall of 2021. Contaminants at the subsurface interface are most able to influence diffusion into the water column and uptake by benthic biota. We focused our analysis on copper, thallium, arsenic, mercury, lead, and zinc, which have been historically deposited in this region and are toxic when at high concentrations. We compared records of regional mining activity to understand the current contamination and assess relevant spatial and temporal gradients. We also used two different extraction methods (EPA 3050b and NH4AcO at pH=7) that can distinguish “environmentally available” vs. tightly associated and less available fractions. We observed consistent concentration of copper across sites indicating a larger relative impact of atmospheric deposition, with some evidence indicating further impacts of point sources. Arsenic, on the other hand, is maintained at high levels in submerged sediments and is likely geologically- and fluvially- derived. Thallium and mercury fluctuate seasonally and correlate with lake elevation. Lead and zinc levels are relatively low in GSL sites compared with freshwater input sites, indicating the deep brine layer may sequester these heavy metals, preventing their release into the water column. Overall, the concentrations of most metals in GSL sediments have declined from historic highs. However, each contaminant has distinct sources, seasonality, mobility and transmission. Complete recovery (if possible) may require many more decades and individual remediation strategies.
more »
« less
- Award ID(s):
- 2012091
- PAR ID:
- 10613399
- Publisher / Repository:
- Frontiers
- Date Published:
- Journal Name:
- Frontiers in Soil Science
- Volume:
- 4
- ISSN:
- 2673-8619
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The rapid growth of the cannabis market in the United States has led to increasing focus on the consumer product safety of the myriad of new products entering commerce. The cannabis plant is widely accepted to be an efficient accumulator of potentially toxic elements, and its resinous nature makes it well suited to accumulate surface contaminants. Unfortunately, limited data are currently available on the occurrence of many elements in consumer cannabis, and even fewer studies have examined surface adhered particulate matter. As part of this study, 26 elements (silver, aluminum, arsenic, barium, beryllium, calcium, cadmium, cobalt, chromium, copper, iron, mercury, potassium, magnesium, manganese, molybdenum, sodium, nickel, lead, antimony, selenium, thorium, thallium, uranium, vanadium, and zinc) were quantified in hemp produced for cannabidiol and commercially available hemp marketed for smoking. Additionally, surface adhered particulate matter was examined as a potential contributor of elemental impurities, and various methodologies were compared. Results confirm that hemp entering commerce in the United States contains a variety of elemental impurities and frequently contains adhered particulate matter such as soil minerals, agricultural additives, microplastics/textile fibers, and materials from harvesting/processing equipment. Consumer exposure potential for some elements such as copper was found to be high enough to warrant additional investigation as to the possible health effects and may justify additional oversight from regulators, who should consider expanding testing panels to a larger suite of elements than arsenic, cesium, mercury, and lead.more » « less
-
Plant wax compounds preserved in lake sediments are used as proxies for paleohydrologic reconstructions. Despite their presence in lake sediments, little is known about their transport from plants to their deposition in lake sediments. By drawing on the leaf and pollen taphonomy literature combined with sediment focusing models, it is possible to develop several working hypotheses for the transport and deposition of plant waxes in lake sediments. An improved understanding of plant wax transport and deposition into lake sediments is necessary to increase the accuracy of paleohydrologic reconstructions. To better understand the controls on plant wax transport and deposition in lake sediment, we analyzed the sedimentary plant waxes from 3 lakes in the Adirondack Mountains of New York. These lakes were chosen to capture a range of basin-specific properties to evaluate their influences on the transport and deposition of plant wax compounds in surface sediments. We spatially characterized sediment properties with surface sediment samples and high-resolution underwater imaging, acoustically profiled the sub-bottom, and measured temperature profiles. From each site, we measured n-alkanes, bulk organic content (loss-on-ignition), bulk carbon and nitrogen concentrations, C:N ratios, and bulk carbon isotopes. Preliminary n-alkane concentrations and chain length distributions, as well as bulk carbon isotopes, are variable within each lake basin suggesting a mix of aquatic and terrestrial sources. The bulk carbon isotope values for two of the three lakes show a similar range of -2‰ compared to a range of -6.3‰ at the third lake. Likewise, the range of total n-alkane concentrations is much higher in the third lake suggesting that the controls on the distribution of n-alkanes and organic carbon are different between lakes. For terrestrial plant waxes, we find low n-alkane concentrations in sandy nearshore sediments relative to higher n-alkane concentrations in deeper fine-grained sediments. Combined, this information suggests that littoral processes focus organic compounds and fine sediments towards the main depo-center of the lake. These and other observations highlight important relationships between basin-specific properties and processes controlling the transport and deposition of plant wax compounds.more » « less
-
Heavy metals contaminants include lead, chromium, arsenic, zinc, cadmium, copper, and mercury all of which can cause significant damage to human health and the environment as a result of their mobility and solubility within groundwater. In the Midwest portion of the United States, soil and groundwater based lead, zinc, and cadmium are the prominent pollutants of concern. While remedial technologies exist for heavy metals pollution, the majority of these solutions are expensive to design, maintain, and install. Drinking water treatment waste (DWTW) is a currently landfilled, relatively pure, industrial waste byproduct composed almost entirely of calcium oxide produced during water purification processes. Measured doses of drinking water treatment waste were submerged in synthetic groundwater solutions containing 0.01, 0.1, and 1.0 millimolar concentrations of lead, cadmium and zinc in order to determine if this material could provide remedial measures for heavy metals. In addition, the geomechanical properties and chemical composition of the material were determined. Removal rates varied based upon internal and external water content as well as flocculant formation. However, all tests verify that the material is capable of heavy metals removal at relatively rapid rates. This data suggests that when entrained in a previous matrix, the reactive nature of the byproduct sorbs ions in solution passing through the matrix.more » « less
-
Abstract The distribution of legacy heavy metals in industrial city soils is not well documented. Therefore, fundamental details such as the ‘background’ (i.e., non-road/non-dripline) concentration of trace metals in urban soils are uncertain. While there has been a strong focus on mapping lead contamination near roads and residences, these studies are generally not placed in the context of the urban background. In this study, ‘background’ distributions of urban relevant trace metals: arsenic, cadmium, copper, lead, and zinc were mapped based on soil samples collected throughout Pittsburgh. Distinct spatial patterns were revealed: contamination is elevated in the eastern portion of the study area, driven by dominant wind patterns and historical coking activities in low-lying areas (paleochannels), areas subject to atmospheric temperature inversions that focus air contamination. The mixing analysis revealed spatial structures in contributions of industrial activities to metal soil contamination. In particular, regions enriched in cadmium relative to zinc (i.e., Zn:Cd<317) were located near historical coking operations, and areas enriched in lead relative to zinc (Pb:Zn>1) were located in areas with historical secondary lead smelters. These results suggest a comprehensive accounting of the trace metals concentrations in background soils has important implications for the assessment of exposure risk in populations residing in historically industrial areas. Relatively sparse sampling of background conditions in urban systems can indicate patterns of legacy contamination and attribute this contamination to historical sources.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3389/fsoil.2024.1445792
