skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: High-efficiency electro-optic lens for radio-frequency beam wavefront modulation for mode mismatch sensing
Active mode mismatch sensing and control can facilitate optimal coupling in optical cavity experiments such as interferometric gravitational wave detectors. In this paper, we demonstrate a radio-frequency (RF) beam wavefront curvature modulation-based mode mismatch sensing scheme inspired by the previously proposed RF beam jitter alignment sensing scheme. The proposed mode mismatch sensing scheme uses an electro-optic lens (EOL) device that is designed to provide the required beam wavefront curvature actuation, as well as a mode converting telescope that rephases the RF second-order modes and generates a non-vanishing mode mismatch sensing signal. We carefully investigate the total second-order mode generation from the wavefront actuation both analytically and numerically, taking the effects of Gaussian beam size evolution and the second-order mode phase mismatch cancellation into consideration. We demonstrate the second-order mode generation as a function of the incident beam waist size and the electro-optic crystal size which, along with a “trade-off” consideration of the beam size at the edges of the crystal and the clipping loss, provides us with guidance for designing the beam profile that interacts with the crystal to improve the EOL modulation efficiency.  more » « less
Award ID(s):
2409530
PAR ID:
10617108
Author(s) / Creator(s):
; ;
Publisher / Repository:
Applied Optics
Date Published:
Journal Name:
Applied Optics
Volume:
64
Issue:
6
ISSN:
1559-128X
Page Range / eLocation ID:
1556
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Optics Express)
    Electro-optical modulation of a continuous wave laser is a highly stable way to generate frequency combs, gaining popularity in telecommunication and spectroscopic applications. These combs are generated by modulating non-linear electro-optic crystals with radio frequencies, creating equally spaced side-bands centered around the single-frequency seed laser. Electro-optic frequency comb architectures often choose between optical bandwidth (cascaded GHz combs) or higher mode density (chirped RF generation). This work demonstrates an electro-optic frequency comb with > 120 GHz of bandwidth and an 80 MHz repetition rate. The comb has three cascaded electro-optic modulators driven at sequentially lower harmonics, the last megahertz modulation dictating the repetition rate. This architecture can modulate at any individual harmonic and repetition rate without changes to the components. This comb can be used in any applications where a stable and tunable repetition rate is needed. 
    more » « less
  2. ; ; ; (, Optics Express)
    We propose an on-chip triply resonant electro-optic modulator architecture for RF-to- optical signal conversion and provide a detailed theoretical analysis of the optimal “circuit-level” device geometries and their performance limits. The designs maximize the RF-optical conversion efficiency through simultaneous resonant enhancement of the RF drive signal, a continuous-wave (CW) optical pump, and the generated optical sideband. The optical pump and sideband are resonantly enhanced in respective supermodes of a two-coupled-cavity optical resonator system, while the RF signal can be enhanced in addition by an LC circuit formed by capacitances of the optical resonator active regions and (integrated) matching inductors. We show that such designs can offer 15-50 dB improvement in conversion efficiency over conventional microring modulators. In the proposed configurations, the photon lifetime (resonance linewidth) limits the instantaneous RF bandwidth of the electro-optic response but does not limit its central RF frequency. The latter is set by the coupling strength between the two coupled cavities and is not subject to the photon lifetime constraint inherent to conventional singly resonant microring modulators. This feature enables efficient operation at high RF carrier frequencies without a reduction in efficiency commonly associated with the photon lifetime limit and accounts for 10-30 dB of the total improvement. Two optical configurations of the modulator are proposed: a “basic” configuration with equal Q-factors in both supermodes, most suitable for narrowband RF signals, and a “generalized” configuration with independently tailored supermode Q-factors that supports a wider instantaneous bandwidth. A second significant 5-20 dB gain in modulation efficiency is expected from RF drive signal enhancement by integrated LC resonant matching, leading to the total expected improvement of 15-50 dB. Previously studied triply-resonant modulators, with coupled longitudinal [across the free spectral range (FSR)] modes, have large resonant mode volume for typical RF frequencies, which limits the interaction between the optical and RF fields. In contrast, the proposed modulators support maximally tightly confined resonant modes, with strong coupling between the mode fields, which increases and maintains high device efficiency across a range of RF frequencies. The proposed modulator architecture is compact, efficient, capable of modulation at high RF carrier frequencies and can be applied to any cavity design or modulation mechanism. It is also well suited to moderate Q, including silicon, implementations, and may be enabling for future CMOS RF-electronic-photonic systems on chip. 
    more » « less
  3. ; ; (, Optics Express)
    We demonstrate a widely spaced, stabilized, and self-referenced opto-electronic oscillator driven electro-optic modulator based optical frequency comb. Using an ultra-stable Fabry-Perot etalon as a stable reference, we simultaneously stabilize a CW laser and generate a low noise and stable RF oscillation used to drive an electro-optic comb. In such a manner, the Fabry-Perot etalon pins both the carrier-envelope-offset frequency (fceo) and the repetition rate of the comb in place (frep), eliminating the need for an external RF oscillator. Usage of the ultra-stable Fabry-Perot etalon as both an optical and RF reference allows the removal of an external RF oscillator. Additionally, we determined the key parameters in producing high contrast ultrashort pulses necessary for coherent octave spanning supercontinuum generation using long and weak pulses associated with electro-optic modulator based combs. By using a monolithically fiber based pulse compression scheme, we produced ultrashort pulses to facilitate measuring the carrier-envelope-offset frequency, allowing for the first self-starting, self-stabilized, and self-referenced opto-electronic oscillator driven electro-optic modulator based optical frequency comb. 
    more » « less
  4. ; ; ; ; ; (, Nanophotonics)
    Abstract Commercial production of integrated photonic devices is limited by scalability of desirable material platforms. We explore a relatively new photonic material, AlScN, for its use in electro-optic phase shifting and modulation. Its CMOS-compatibility could facilitate large-scale production of integrated photonic modulators, and it exhibits an enhanced second-order optical nonlinearity compared to intrinsic AlN, indicating the possibility for efficient modulation. Here, we measure the electro-optic effect in Al0.80Sc0.20N-based phase shifters. We utilized the TM0 mode, allowing use of ther33electro-optic coefficient, and demonstratedVπLaround 750 V cm. Since the electro-optic response is smaller than expected, we discuss potential causes for the reduced response and future outlook for AlScN-based photonics. 
    more » « less
  5. (, 2021 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, Singapore)
    Abstract—The efficiency of Electro-Optic Modulators (EOM) is directly related to how the rf signal is imposed onto the optical signal. Other factors affecting this efficiency are: the selected architecture and the Electro-Optic materials responsible for modulation through the Electro-Optic Effect. In this paper we demonstrate a millimeter wave antenna integrated EOM that operates at 94 GHz. To improve efficiency, the antenna is integrated directly onto the active region of the electro-optic effect based EOM. Notably, conventional antennas had to be modified to achieve a feed port that is best suited for the selected EOM architecture. For the antenna design optimization, we devised a design procedure that is more suitable for these type of devices. We proposed a design methodology that insures an optimum Field Enhancement (FE) that is responsible for modulation. A novel overall EOM architecture that promotes increased efficiency that makes use of the inherently lossy EO material only where needed in the optical link by making use of an adiabatic transition from a passive Optical waveguide to active portion of the optical link. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email