An official website of the United States government
Forced oscillation events have become a challenging problem with the increasing penetration of renewable and other inverter-based resources (IBRs), especially when the forced oscillation frequency coincides with the dominant natural oscillation frequency. A severe forced oscillation event can deteriorate power system dynamic stability, damage equipment, and limit power transfer capability. This paper proposes a two-dimension scanning forced oscillation grid vulnerability analysis method to identify areas/zones in the system that are critical to forced oscillation. These critical areas/zones can be further considered as effective actuator locations for the deployment of forced oscillation damping controllers. Additionally, active power modulation control through IBRs is also proposed to reduce the forced oscillation impact on the entire grid. The proposed methods are demonstrated through a case study on a synthetic Texas power system model. The simulation results demonstrate that the critical areas/zones of forced oscillation are related to the areas that highly participate in the natural oscillations and the proposed oscillation damping controller through IBRs can effectively reduce the forced oscillation impact in the entire system.
more »
« less
Impact of the Exciter and Governor Parameters on Forced Oscillations
In recent years, the frequency of forced oscillation events due to control system malfunctions or improper parameter settings has increased. Tuning the parameters of exciters and governor models is crucial for maintaining power system stability. Traditional simulation studies typically involve small transient disturbances or step changes to find optimal parameter sets, but existing optimization algorithms often fall short in fine-tuning for forced oscillations. Identifying the sensitive parameters within these control models is essential for ensuring stability during large, sustained disturbances. This study focuses on identifying these critical exciter and governor model parameters by analyzing their influence on sustained forced oscillations. Using Kundur’s two-area system, we analyze common exciter models such as SCRX, ESST1A, and AC7B, along with governor models like GAST, HYGOV, and GGOV1, utilizing PSS®E software version 34. Sustained forced oscillations are injected at generator-1 of area-1, with individual parameter changes dynamically simulated. By considering a local oscillation frequency of 1.4 Hz and an inter-area oscillation mode of 0.25 Hz, we analyze the impact of each parameter change on the magnitude and frequency of forced oscillations as well as on active and reactive power outputs. This novel approach highlights the most influential parameters of each tested model—such as exciter, governor, and turbine gains, as well as time constant parameters—on the impact of forced oscillations. Based on our findings, the sensitive parameters of each tested model are ranked. These would provide valuable insights for industry operators to fine-tune control settings during oscillation events, ultimately enhancing system stability.
more »
« less
- Award ID(s):
- 1941101
- PAR ID:
- 10625800
- Publisher / Repository:
- MDPI
- Date Published:
- Journal Name:
- Electronics
- Volume:
- 13
- Issue:
- 16
- ISSN:
- 2079-9292
- Page Range / eLocation ID:
- 3177
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Synchronous condensers (SynCons) have been deployed in power grids penetrated by inverter-based resources (IBRs) worldwide to strengthen and stabilize the grids. This paper examines which machine parameters influence IBR weak grid stability and whether excitation systems also play a role. Four types of stability scenarios are examined, including transient stability, oscillations of a few Hz, oscillations near 9 Hz, and dynamic voltage stability. It is shown that the most influential machine parameter varies for the different types of stability issues. While minimization of field winding inductance (typically the major component of the machine transient reactance, X′d) can significantly improve transient stability, voltage stability, and low-frequency oscillatory stability, this parameter has no influence on relatively rapid oscillations. On the other hand, minimizing rotor damper winding inductance (typically the major component of the machine subtransient reactance, X′′d) improves the 9-Hz oscillation stability, but with insignificant influence on the other three types of stability. Furthermore, the excitation system characteristics show negligible influence for any of the scenarios. In addition to the simulation studies, we show how the operational reactances are associated with the machine's dq impedance viewed from the terminal bus and how a SynCon reduces the equivalent grid impedance, thereby improving weak grid stability. Finally, it is concluded that minimization of both transient and subtransient direct-axis reactances should help in a range of stability scenarios, while cautions should be taken when dealing with quadrature-axis transient reactances.more » « less
-
Ensuring the stability of power systems is gaining more attention today than ever before due to the rapid growth of uncertainties in load and increased renewable energy penetration. Lately, wide-area measurement system (WAMS)-based centralized controlling techniques are offering flexibility and more robust control to keep the system stable. WAMS-based controlling techniques, however, face pressing challenges of irregular delays in long-distance communication channels and subsequent responses of equipment to control actions. This paper presents an innovative control strategy for damping down low-frequency oscillations in transmission systems. The method uses a reinforcement learning technique to overcome the challenges of communication delays and other non-linearity in wide-area damping control. It models the traditional problem of oscillation damping control as a novel faster exploration-based deep deterministic policy gradient (DDPG-S). An effective reward function is designed to capture necessary features of oscillations enabling timely damping of such oscillations, even under various kinds of uncertainties. A detailed analysis and a systematically designed numerical validation are presented to prove feasibility, scalability, interpretability, and comparative performance of the modelled low-frequency oscillation damping controller. The benefit of the technique is that stability is ensured even when uncertainties of load and generation are on the rise.more » « less
-
Periodic upstream flow disturbances from a bluff body have recently been shown to be able to modulate and annihilate limit cycle oscillations (LCOs) in a downstream aeroelastic wing section under certain conditions. To further investigate these phenomena, we have implemented a controllable wind tunnel disturbance generator to enable quantification of the parameter ranges under which these nonlinear interactions can occur. This disturbance generator, consisting of a pitch-actuated cylinder with an attached splitter plate, can be oscillated to produce a von Karman type wake with vortex shedding frequency equal to the oscillation frequency over a range of frequencies around the natural shedding frequency of the cylinder alone. At vortex shedding frequencies away from the LCO frequency of the wing, forced oscillations were observed in the wing, but the wing did not enter self-sustaining LCOs. However, when disturbances were introduced near the LCO frequency, the initially static downstream wing entered self-sustaining oscillations in the presence of the incoming vortices, and these LCOs persisted when the disturbance generator was stopped. Annihilation of the wing LCOs was also observed disturbance vortices were introduced upstream of the wing in LCO.more » « less
-
Past research argues for an internal multidecadal (40- to 60-year) oscillation distinct from climate noise. Recent studies have claimed that this so-termed Atlantic Multidecadal Oscillation is instead a manifestation of competing time-varying effects of anthropogenic greenhouse gases and sulfate aerosols. That conclusion is bolstered by the absence of robust multidecadal climate oscillations in control simulations of current-generation models. Paleoclimate data, however, do demonstrate multidecadal oscillatory behavior during the preindustrial era. By comparing control and forced “Last Millennium” simulations, we show that these apparent multidecadal oscillations are an artifact of pulses of volcanic activity during the preindustrial era that project markedly onto the multidecadal (50- to 70-year) frequency band. We conclude that there is no compelling evidence for internal multidecadal oscillations in the climate system.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3390/electronics13163177
