An official website of the United States government
Microbially induced calcium carbonate precipitation (MICP) has emerged as a novel technology with the potential to produce building materials through lower-temperature processes. The formation of calcium carbonate bridges in MICP allows the biocementation of aggregate particles to produce biobricks. Current approaches require several pulses of microbes and mineralization media to increase the quantity of calcium carbonate minerals and improve the strength of the material, thus leading to a reduction in sustainability. One potential technique to improve the efficiency of strength development involves trapping the bacteria on the aggregate surfaces using silane coupling agents such as positively charged 3-aminopropyl-methyl-diethoxysilane (APMDES). This treatment traps bacteria on sand through electrostatic interactions that attract negatively charged walls of bacteria to positively charged amine groups. The APMDES treatment promoted an abundant and immediate association of bacteria with sand, increasing the spatial density of ureolytic microbes on sand and promoting efficient initial calcium carbonate precipitation. Though microbial viability was compromised by treatment, urea hydrolysis was minimally affected. Strength was gained much more rapidly for the APMDES-treated sand than for the untreated sand. Three injections of bacteria and biomineralization media using APMDES-treated sand led to the same strength gain as seven injections using untreated sand. The higher strength with APMDES treatment was not explained by increased calcium carbonate accrual in the structure and may be influenced by additional factors such as differences in the microstructure of calcium carbonate bridges between sand particles. Overall, incorporating pretreatment methods, such as amine silane coupling agents, opens a new avenue in biomineralization research by producing materials with an improved efficiency and sustainability.
more »
« less
This content will become publicly available on December 1, 2026
Strengthening biopolymer adhesives through ureolysis-induced calcium carbonate precipitation
Common adhesives for nonstructural applications are manufactured using petrochemicals and synthetic solvents. These adhesives are associated with environmental and health concerns because of their release of volatile organic compounds (VOCs). Biopolymer adhesives are an attractive alternative because of lower VOC emissions, but their strength is often insufficient. Existing mineral fillers can improve the strength of biopolymer adhesives but require the use of crosslinkers that lower process sustainability. This work introduces a novel approach to strengthen biopolymer adhesives through calcium carbonate biomineralization, which avoids the need for crosslinkers. Biomineral fillers produced by either microbially or enzymatically induced calcium carbonate precipitation (MICP and EICP, respectively) were precipitated within guar gum and soy protein biopolymers. Both, MICP and EICP, increased the strength of the biopolymer adhesives. The strength was further improved by optimizing the concentrations of bacteria, urease enzyme, and calcium. The highest strengths achieved were on par with current commercially available nonstructural adhesives. This study demonstrates the feasibility of using calcium carbonate biomineralization to improve the properties of biopolymer adhesives, which increases their potential viability as more sustainable adhesives.
more »
« less
- PAR ID:
- 10631175
- Publisher / Repository:
- Nature Portfolio
- Date Published:
- Journal Name:
- Scientific Reports
- Volume:
- 15
- Issue:
- 1
- ISSN:
- 2045-2322
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Conventional adhesives often use fossil fuel-based raw materials and release volatile organic compounds harmful to human health. Biobased adhesives may be eco-friendly and non-toxic alternatives, but their use has been limited in part because of poor mechanical performance and water resistance. Recent work demonstrates that precipitation of calcium carbonate in association with ureolytic bacteria or plant-based ureases increases the adhesive strength of biopolymer adhesives. However, the water resistance and thermal stability characteristics of these biomineral-reinforced biopolymer adhesives have not yet been evaluated. In this work, we tested the performance of biomineral-reinforced adhesives after moisture and a range of temperature exposures. We found that the adhesives retain their adhesive strength from below freezing to room temperatures and after prolonged exposure to moderate (50 % relative) humidity. The structural integrity of the adhesives is compromised at high humidity or temperature exposures due to solubility and limited thermal stability of the organic biopolymers. These findings open opportunities for future improvements in the design of biomineral-reinforced adhesives.more » « less
-
Biomineralization is a promising approach for producing composite materials that contain living organisms, biopolymers, and minerals. Brittle biomineralized materials can be potentially toughened by more deformable microorganisms and biopolymers. Microbially‐induced carbonate precipitation (MICP) is a common type of biomineralization that occurs when urease‐producing bacteria hydrolyze urea to form calcium carbonate (). MICP is often used in porous materials to improve their mechanical properties. The morphology of the precipitation is strongly influenced by the bacteria and the morphology and porosity of the host medium. To explore their effects on MICP, we constructed an agent‐based discrete element model to investigate clustering and morphology in tandem with the growth of bacterial cells and the secretion of extracellular polymers. The model parameters are validated and optimized via our experimental measurements. We further addressed parametric uncertainties and quantitatively evaluated the relative importance of enzyme secretion, catalytic kinetics, and diffusion dynamics parameters by employing Monte Carlo simulations combined with data‐driven variogram analysis. Based on this model, we also examine the influence of bacterial concentration, bacterial distribution, urea concentration, and the geometry of porous media on the morphology. Unlike prior field‐scale or particle‐based methods that primarily focus on structures, our model will pave the way toward the study of the kinetics of urease‐producing bacteria and the mechanically relevant microstructural features of MICP‐treated composite materials.more » « less
-
Abstract Researchers have made headway against challenges of increasing cement infrastructure and low plastic recycling rates by using waste plastic in cementitious materials. Past studies indicate that microbially induced calcium carbonate precipitation (MICP) to coat plastic in calcium carbonate may improve the strength. The objective of this study was to increase the amount of clean and contaminated waste plastic that can be added to mortar and to assess whether MICP treatment enhances the strength. The performance of plastic-filled mortar was investigated at 5%, 10%, and 20% volume replacement for cement. Untreated, clean plastics at a 20% cement replacement produced compressive strengths acceptable for several applications. However, a coating of MICP on clean waste plastic did not improve the strengths. At 10% replacement, both MICP treatment and washing of contaminated plastics recovered compressive strengths by approximately 28%, relative to mortar containing oil-coated plastics. By incorporating greater volumes of waste plastics into mortar, the sustainability of cementitious composites has the potential of being improved by the dual mechanisms of reduced cement production and repurposing plastic waste.more » « less
-
Abstract Microbially-induced calcium carbonate precipitation (MICP) is a biological process in which microbially-produced urease enzymes convert urea and calcium into solid calcium carbonate (CaCO3) deposits. MICP has been demonstrated to reduce permeability in shale fractures under elevated pressures, raising the possibility of applying this technology to enhance shale reservoir storage safety. For this and other applications to become a reality, non-invasive tools are needed to determine how effectively MICP seals shale fractures at subsurface temperatures. In this study, two different MICP strategies were tested on 2.54 cm diameter and 5.08 cm long shale cores with a single fracture at 60 ℃. Flow-through, pulsed-flow MICP-treatment was repeatedly applied to Marcellus shale fractures with and without sand (“proppant”) until reaching approximately four orders of magnitude reduction in apparent permeability, while a single application of polymer-based “immersion” MICP-treatment was applied to an Eagle Ford shale fracture with proppant. Low-field nuclear magnetic resonance (LF-NMR) and X-Ray computed microtomography (micro-CT) techniques were used to assess the degree of biomineralization. With the flow-through approach, these tools revealed that while CaCO3precipitation occurred throughout the fracture, there was preferential precipitation around proppant. Without proppant, the same approach led to premature sealing at the inlet side of the core. In contrast, immersion MICP-treatment sealed off the fracture edges and showed less mineral precipitation overall. This study highlights the use of LF-NMR relaxometry in characterizing fracture sealing and can help guide NMR logging tools in subsurface remediation efforts.more » « less
