More Like this

1. A Novel Discrete Variable Stiffness Gripper Based on the Fin Ray Effect

   https://doi.org/10.1007/978-3-031-13835-5_71  

   Fu, J.; Lin, H.; Prathyush, I.V.S.; Huang, X.; Zheng, L.; Gan, D. (August 2022, Intelligent Robotics and Applications)

   Liu, H.; Yin, Z.; Liu, L.; Jiang, L.; Gu, G.; Wu, X.; Ren, W. (Ed.)

   Variable stiffness grippers can adapt to objects with different shapes and gripping forces. This paper presents a novel variable stiffness gripper (VSG) based on the Fin Ray effect that can adjust stiffness discretely. The main structure of the gripper includes the compliant frame, rotatable ribs, and the position limit components attached to the compliant frame. The stiffness of the gripper can be adjusted by rotating the specific ribs in the frame. There are four configurations for the gripper that were developed in this research: a) all ribs OFF (Flex) mode; b) upper ribs ON and lower ribs OFF (Hold) mode; c) upper ribs OFF and lower ribs ON (Pinch) mode; d) all ribs ON (Clamp) mode. Different configurations can provide various stiffness for the gripper’s finger to adapt the objects with different shapes and weights. To optimize the design, the stiffness analysis under various configurations and force conditions was implemented by finite element analysis (FEA). The 3-D printed prototypes were constructed to verify the feature and performance of the design concept of the VSG compared with the FEA results. The design of the VSG provides a novel idea for industrial robots and collaborative robots on adaptive grasping. 

   more » « less
2. A Vacuum-driven Origami “Magic-ball” Soft Gripper

   Shuguang Li, John J. (April 2019, International Conference on Robotics and Automation (ICRA))

   Soft robotics has yielded numerous examples of soft grippers that utilize compliance to achieve impressive grasping performances with great simplicity, adaptability, and robustness. Designing soft grippers with substantial grasping strength while remaining compliant and gentle is one of the most important challenges in this field. In this paper, we present a light-weight, vacuum-driven soft robotic gripper made of an origami “magic-ball” and a flexible thin membrane. We also describe the design and fabrication method to rapidly manufacture the gripper with different combinations of low- cost materials for diverse applications. Grasping experiments demonstrate that our gripper can lift a large variety of objects, including delicate foods, heavy bottles, and other miscellaneous items. The grasp force on 3D-printed objects is also characterized through mechanical load tests. The results reveal that our soft gripper can produce significant grasp force on various shapes using negative pneumatic pressure (vacuum). This new gripper holds the potential for many practical applications that require safe, strong, and simple grasping. 

   more » « less
3. Design and Modeling of a New Variable Stiffness Robotic Finger Based on Reconfigurable Beam Property Change for Flexible Grasping

   https://doi.org/10.1115/DETC2022-89856  

   Xu, Wei; Fu, Jiaming; Gan, Dongming (August 2022, ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference)

   Abstract Flexible grippers can provide fine grasping and manipulation to various objects and environment interactions. However, most current mechanisms can not change the stiffness in a short time, which limits the application scenario of the flexible grippers. This paper presents a novel variable stiffness robotic finger that can adapt to soft and rigid gripping objects by continuously changing its stiffness over a wide range in a short period of time. The principle is to change the second area moment of inertia of the finger by changing the filling ratio of the cavity between two parallel beams. A complete theoretical stiffness model is developed and compared with the finite element analysis (FEA) model. Effects of multiple design parameters on finger stiffness performance are compared and analyzed, and the accuracy of the theoretical model is verified, with a maximum error of less than 6.5%. The performance of the finger is further evaluated through an experimental prototype, which proved that the finger can safely perform a wide range of daily object-grasping tasks with adaptable compliance. The proposed stiffness-varying mechanism can adjust stiffness in a short time with a very large ratio (around 1:37). The design provides a new direction in developing variable-stiffness robotic grippers for flexible grasping. 

   more » « less
4. A Novel Variable Stiffness Soft Robotic Gripper

   https://doi.org/10.1109/CASE49439.2021.9551616  

   Arachchige, Dimuthu D.K.; Chen, Yue; Walker, Ian D.; Godage, Isuru S. (August 2021, IEEE International Conference on Automation Science and Engineering (CASE))

   Compliant grasping is crucial for secure handling objects not only vary in shapes but also in mechanical properties. We propose a novel soft robotic gripper with decoupled stiffness and shape control capability for performing adaptive grasping with minimum system complexity. The proposed soft fingers conform to object shapes facilitating the handling of objects of different types, shapes, and sizes. Each soft gripper finger has a length constraining mechanism (an articulable rigid backbone) and is powered by pneumatic muscle actuators. We derive the kinematic model of the gripper and use an empirical approach to simultaneously map input pressures to stiffness control and bending deformation of fingers. We use these mappings to demonstrate decoupled stiffness and shape (bending) control of various grasping configurations. We conduct tests to quantify the grip quality when holding objects as the gripper changes orientation, the ability to maintain the grip as the gripper is subjected to translational and rotational movements, and the external force perturbations required to release the object from the gripper under various stiffness and shape (bending) settings. The results validate the proposed gripper's performance and show how the decoupled stiffness and shape control can improve the grasping quality in soft robotic grippers. 

   more » « less
5. A Novel Variable Stiffness Soft Robotic Gripper

   Arachchige, D.K.; Chen, Y.; Walker, I.D.; Godage, I.S. (August 2021, IEEE International Conference on Automation Science and Engineering CASE)

   null (Ed.)

   Compliant grasping is crucial for secure handling objects not only vary in shapes but also in mechanical properties. We propose a novel soft robotic gripper with decoupled stiffness and shape control capability for performing adaptive grasping with minimum system complexity. The proposed soft fingers conform to object shapes facilitating the handling of objects of different types, shapes, and sizes. Each soft gripper finger has a length constraining mechanism (an articulable rigid backbone) and is powered by pneumatic muscle actuators. We derive the kinematic model of the gripper and use an empirical approach to simultaneously map input pressures to stiffness control and bending deformation of fingers. We use these mappings to demonstrate decoupled stiffness and shape (bending) control of various grasping configurations. We conduct tests to quantify the grip quality when holding objects as the gripper changes orientation, the ability to maintain the grip as the gripper is subjected to translational and rotational movements, and the external force perturbations required to release the object from the gripper under various stiffness and shape (bending) settings. The results validate the proposed gripper’s performance and show how the decoupled stiffness and shape control can improve the grasping quality in soft robotic grippers. 

   more » « less