skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Design and Operation Principles of a Wave-Controlled Reconfigurable Intelligent Surface
A Reconfigurable Intelligent Surface (RIS) consists of many small reflective elements whose reflection properties can be adjusted to change the wireless propagation environment. Envisioned implementations require that each RIS element be connected to a controller, and as the number of RIS elements on a surface may be on the order of hundreds or more, the number of required electrical connectors creates a difficult wiring problem. A potential solution to this problem was previously proposed by the authors in which “biasing transmission lines” carrying standing waves are sampled at each RIS location to produce the desired bias voltage for each RIS element. This paper presents models for the RIS elements that account for mutual coupling and realistic varactor characteristics, as well as circuit models for sampling the transmission line to generate the RIS control signals. The paper investigates two techniques for conversion of the transmission line standing wave voltage to the varactor bias voltage, namely an envelope detector and a sample-and-hold circuit. The paper also develops a modal decomposition approach for generating standing waves that are able to generate beams and nulls in the resulting RIS radiation pattern that maximize either the Signal-to-Noise Ratio (SNR) or the Signal-to-Leakage-plus-Noise Ratio (SLNR). The paper provides five algorithms, two for the case of the envelope detector, one for the sample-and-hold circuit, one for pursuing the global minimum for both circuits, and one for simultaneous beam and null steering. Extensive simulation results show that while the envelope detector is simpler to implement, the sample-and-hold circuit has substantially better performance and runs in substantially less time. In addition, the wave-controlled RIS is able to generate strong beams and deep nulls in desired directions. This is in contrast with the case of arbitrary control of each varactor element and idealized RIS models.  more » « less
Award ID(s):
2030029
PAR ID:
10636026
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
IEEE
Date Published:
Journal Name:
IEEE Open Journal of the Communications Society
Volume:
5
ISSN:
2644-125X
Page Range / eLocation ID:
7730 to 7751
Subject(s) / Keyword(s):
Spatial Fourier series, envelope detection, sample-and-hold, least squares (LS), simulated annealing (SA)
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, IEEE)
    A novel method for biasing the varactors of a reconfigurable intelligent surface (RIS) by using resonant standing waves on the biasing transmission line (TL) at a layer below the RF reflective surface to eliminate the need to bring external bias for each element of the RIS is described. We use an analytical model of the RIS to compare the field pattern of the reflected wave by (i) considering the ideal case, (ii) the case where reflection accounts for the varactor's model, and (iii) the case as in (ii) but where the biasing voltage distribution is constructed by using the wave control (i.e., standing waves). 
    more » « less
  2. ; ; ; ; (, IEEE Open Journal of the Communications Society)
    A promising type of Reconfigurable Intelligent Surface (RIS) employs tunable control of its varactors using biasing transmission lines below the RIS reflecting elements. Biasing standing waves (BSWs) are excited by a time-periodic signal and sampled at each RIS element to create a desired biasing voltage and control the reflection coefficients of the elements. A simple rectifier can be used to sample the voltages and capture the peaks of the BSWs over time. Like other types of RIS, attempting to model and accurately configure a wave-controlled RIS is extremely challenging due to factors such as device non-linearities, frequency dependence, element coupling, etc., and thus significant differences will arise between the actual and assumed performance. An alternative approach to solving this problem is data-driven: Using training data obtained by sampling the reflected radiation pattern of the RIS for a set of BSWs, a neural network (NN) is designed to create an input-output map between the BSW amplitudes and the resulting sampled radiation pattern. This is the approach discussed in this paper. In the proposed approach, the NN is optimized using a Genetic Algorithm (GA) to minimize the error between the estimated and measured radiation patterns. The BSW amplitudes are then designed via Simulated Annealing (SA) to optimize a signal-to-leakage-plus-noise ratio measure by iteratively forward-propagating the BSW amplitudes through the NN and using its output as feedback to determine convergence. The resulting optimal solutions are stored in a lookup table to be used both as settings to instantly configure the RIS and as a basis for determining more complex radiation patterns. 
    more » « less
  3. ; ; ; (, IEEE)
    An innovative method has developed recently for biasing the varactors of a reconfigurable intelligent surface (RIS) by utilizing resonant standing waves on the “biasing transmission line (TL)” [E. Ayanoglu, F. Capolino, and A. L. Swindlehurst, “Wave-controlled metasurface-based reconfigurable intelligent surfaces,” IEEE Wireless Communications, vol. 29, no. 4, pp. 86-92,2022] located beneath the reflective surface. Using this approach, each RIS element does not require separate external biasing. For estimating the RIS reflection properties controlled by varactors, we analyze a planar array with phase gradient in one direction, of side length L, of reconfigurable elements. We employ the analytical model for predicting the reflection coefficients of the unit cells presented in [D. Hanna, M. Saavedra-Melo, F. Shan, and F. Capolino, “A versatile polynomial model for reflection by a reflective intelligent surface with varactors,” IEEE AP-S/URSI, 2022] and investigate how the standing wave biasing approach compares with the traditional way to generate field patterns of the reflected wave. 
    more » « less
  4. ; ; ; (, 2022 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (AP-S/URSI))
    An analytical model for reflection of a reconfigurable intelligent surface (RIS) using varactors to adjust the reflection phase of an incident plane wave is presented. The model results are compared to a full-wave RIS simulation for different varactor bias voltages. The model is intended to be analytical and simple enough, but related to a realistic RIS, to be inserted into MIMO wireless systems algorithms to estimate the propagation channel including the RIS. 
    more » « less
  5. ; ; (, Proceedings - IEEE International ASIC Conference and Exhibit)
    The Polymorphic Circuit Interoperability Framework is presented in this paper. This framework separates the polymorphic component (called the polymorphic element) from the functional gates (called the switchable gate). The requirement of the framework is that the polymorphic element outputs a non-empty set of signals that change based on the polymorphic effect desired. In this paper, single output polymorphic elements based on voltage and clock speed are shown, and a polymorphic element based on temperature is theoretically adapted from existing literature [5]. A switchable gate that implements NAND/NOR functionality is shown and used with these polymorphic elements to test the framework for polymorphic functionality. The results are presented and polymorphic functionality is successfully demonstrated. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email