An official website of the United States government
Abstract We integrate reverse reaction pathway screening, process design and simulation, and process assessment to ensure the technical feasibility, economic viability, and environmental sustainability of biorefineries. We propose an efficient production process for 2‐vinylfuran that fully utilizes second‐generation biomass. Economic assessment indicates that this process can produce 2‐vinylfuran at a competitive cost of $1021 per ton when the production capacity reaches 366 kt/year, supported by reasonable policy initiatives. Sensitivity analysis using Monte Carlo simulations suggests that the investment risk for the 2‐vinylfuran production project could be as low as 26% when scaled up to 500 kt/year. A comparative life cycle assessment highlights significant environmental benefits for 2‐vinylfuran: its production reduces global warming potential (GWP) and non‐renewable energy use (NREU) by over 42% and 30%, respectively, compared to styrene production. Furthermore, the carbon selectivity and carbon yield of the 2‐vinylfuran production process reach as high as 25.2% and 36.2%.
more »
« less
This content will become publicly available on September 25, 2026
A superstructure‐based optimization model for Polyethylene furandicarboxylate production
Abstract Polyethylene furandicarboxylate (PEF) is a novel bio‐based replacement for polyethylene terephthalate (PET). The objective of our study is to improve its economic and environmental competitiveness by applying superstructure‐based pathway optimization, process simulation, techno‐economic analysis, and life‐cycle assessment for the industrial‐scale PEF production. A PEF production pathway that fully utilizes second‐generation biomass is proposed. The mass balance analysis indicates that the carbon utilization of second‐generation biomass could reach up to 21.4%. We found that this production pathway can economically compete with fossil‐based polyethylene terephthalate (PET) under reasonable operating conditions. It achieves over 30% savings in non‐renewable energy use (NREU) and a 38% reduction in carbon emissions. Risk assessment suggests that implementing policies related to NREU and carbon emissions could reduce the investment risk of this PEF production project to less than 20%. This work establishes technical and policy benchmark goals to achieve the economic competitiveness of PEF over PET.
more »
« less
- Award ID(s):
- 2134471
- PAR ID:
- 10640109
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- AIChE Journal
- ISSN:
- 0001-1541
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Fiber-reinforced concrete (FRC) can have improved durability and tensile properties, potentially enabling the more efficient use of concrete and lowering greenhouse gas (GHG) emissions. Yet, systematic quantifications of the environmental impacts of FRC, particularly when paired with changes to mechanical properties and the implications for material longevity, are limited. Herein, an assessment following the life-cycle assessment methodology for four common FRCs was performed, namely, those reinforced with polyvinyl alcohol (PVA), steel (ST), polypropylene (PP), and polyethylene terephthalate (PET). The analysis was bound to a cradle-to-gate scope, and solely virgin fiber material production was considered for the environmental impacts. Coupled changes in compressive and tensile strength, environmental impacts, and the role of material longevity and cost relative to unreinforced concrete were examined. Findings from this work show that, similar to unreinforced concrete, cement remains a key source of GHG emissions in FRC production. However, in FRCs fibers can drive additional emissions by up to 55%. Notably, PVA and ST led to the highest impacts and costs, which were minimal for inclusions of PP and PET. Yet ST contributed to the greatest benefits in flexural and compressive strengths. When the effects of longevity were integrated, FRC with PP reinforcement could offer desired emissions reductions with minimal increase in use period and cost, but the other fiber reinforcements considered may need to offer longer service life extension to reduce emissions compared with conventional concrete. These results indicate that FRC can enhance mechanical performance, but fiber type selections should be informed by the design life to achieve actual GHG emissions reductions.more » « less
-
The global utilization of single-use, non-biodegradable plastics, such as bottles made of polyethylene terephthalate (PET), has contributed to catastrophic levels of plastic pollution. Fortu- nately, microbial communities are adapting to assimilate plastic waste. Previously, our work showed a full consortium of five bacteria capable of synergistically degrading PET. Using omics approaches, we identified the key genes implicated in PET degradation within the consortium’s pangenome and transcriptome. This analysis led to the discovery of a novel PETase, EstB, which has been observed to hydrolyze the oligomer BHET and the polymer PET. Besides the genes implicated in PET degradation, many other biodegradation genes were discovered. Over 200 plastic and plasticizer degradation-related genes were discovered through the Plastic Microbial Biodegradation Database (PMBD). Diverse carbon source utilization was observed by a microbial community-based assay, which, paired with an abundant number of plastic- and plasticizer-degrading enzymes, indicates a promising possibility for mixed plastic degradation. Using RNAseq differential analysis, several genes were predicted to be involved in PET degradation, including aldehyde dehydrogenases and several classes of hydrolases. Active transcription of PET monomer metabolism was also observed, including the generation of polyhydroxyalkanoate (PHA)/polyhydroxybutyrate (PHB) biopolymers. These results present an exciting opportunity for the bio-recycling of mixed plastic waste with upcycling potential.more » « less
-
Katherine McMahon, University of (Ed.)Plastics, such as polyethylene terephthalate (PET) from water bottles, are polluting our oceans, cities, and soils. While a number of Pseudomonas species have been described that degrade aliphatic polyesters, such as polyethylene (PE) and polyurethane (PUR), few from this genus that degrade the semiaromatic poly- mer PET have been reported. In this study, plastic-degrading bacteria were isolated from petroleum-polluted soils and screened for lipase activity that has been associ- ated with PET degradation. Strains and consortia of bacteria were grown in a liquid carbon-free basal medium (LCFBM) with PET as the sole carbon source. We moni- tored several key physical and chemical properties, including bacterial growth and modi!cation of the plastic surface, using scanning electron microscopy (SEM) and attenuated total re"ectance-Fourier transform infrared spectroscopy (ATR-FTIR) spec- troscopy. We detected by-products of hydrolysis of PET using 1H-nuclear magnetic resonance (1H NMR) analysis, consistent with the ATR-FTIR data. The full consortium of !ve strains containing Pseudomonas and Bacillus species grew synergistically in the presence of PET and the cleavage product bis(2-hydroxyethyl) terephthalic acid (BHET) as sole sources of carbon. Secreted enzymes extracted from the full consor- tium were capable of fully converting BHET to the metabolically usable monomers terephthalic acid (TPA) and ethylene glycol. Draft genomes provided evidence for mixed enzymatic capabilities between the strains for metabolic degradation of TPA and ethylene glycol, the building blocks of PET polymers, indicating cooperation and ability to cross-feed in a limited nutrient environment with PET as the sole carbon source. The use of bacterial consortia for the biodegradation of PET may provide a partial solution to widespread planetary plastic accumulation.more » « less
-
For several decades, plasma processing has been employed in the areas of food processing, manufacturing, and agriculture. Plasma processing has also been recognized as greatly beneficial in the field of tissue engineering for the modification of biomaterials. Polyethylene terephthalate (PET) has been employed as a vascular graft material but fails in small diameter applications. In this work, a multifaceted approach combining electrospinning to produce nano- and microscale fibers from PET blended with polybutylene terephthalate (PBT) added for flexibility and plasma modification for enhancing the surface chemistry is demonstrated to be an efficient approach to increase the biocompatibility as evidenced by enhanced fibroblast growth. The analysis of the surface chemistry shows an increase in oxygenated surface functionality, while the bulk analysis shows no significant changes. Thus, an efficient methodology for producing PET/PBT-based grafts that are easily modified with low-temperature plasma and show enhanced biocompatibility for vascular tissue engineering applications is reported.more » « less
